• 제목/요약/키워드: Weight Method

검색결과 9,567건 처리시간 0.038초

Performance of non-prismatic simply supported prestressed concrete beams

  • Raju, P. Markandeya;Rajsekhar, K.;Sandeep, T. Raghuram
    • Structural Engineering and Mechanics
    • /
    • 제52권4호
    • /
    • pp.723-738
    • /
    • 2014
  • Prestressing is the most commonly employed technique in bridges and long span beams in commercial buildings as prestressing results in slender section with higher load carrying capacities. This work is an attempt to study the performance of a minimum weight prestressed concrete beam adopting a non-prismatic section so that there will be a reduction in the volume of concrete which in turn reduces the self-weight of the structure. The effect of adopting a non-prismatic section on parameters like prestressing force, area of prestressing steel, bending stresses, shear stresses and percentage loss of prestress are established theoretically. The analysis of non-prismatic prestressed beams is based on the assumption of pure bending theory. Equations are derived for dead load bending moment, eccentricity, and depth at any required section. Based on these equations an algorithm is developed which does the stress checks for the given section for every 500 mm interval of the span. Limit state method is used for the design of beam and finite difference method is used for finding out the deflection of a non-prismatic beam. All the parameters of nonprismatic prestressed concrete beams are compared with that of the rectangular prestressed concrete members and observed that minimum weight design and economical design are not same. Minimum weight design results in the increase in required area of prestressing steel.

가중함수법에 의한 기계적 체결홀에 존재하는 타원호형: 관통균열의 음력확대계수 해석 (II) - 혼합모드 음력확대계수 해석 - (Stress Intensity Factor Analysis of Elliptical Arc Through Cracks at Mechanical Fastener Holes by Weight Function Method (II) - Mixed-Mode Stress Intensity Factor Analysis -)

  • 허성필;양원호;류명해
    • 대한기계학회논문집A
    • /
    • 제25권10호
    • /
    • pp.1671-1677
    • /
    • 2001
  • Cracks at mechanical fastener holes usually nucleate as elliptical comer cracks at the faying surface of the mechanical joints and grow as elliptical arc through cracks. The weight function method for elliptical arc through cracks at mechanical fastener holes has been developed and verified in the part I of this study. In part H, applying the weight function method, the effects of the amount of clearance on the mixed-mode stress intensity (actors are investigated and the change of crack shape is predicted from the analysis for various crack shapes. The stress intensity factors leer inclined crack are analyzed and critical angle at which mode I stress intensity factor becomes maximum is determined.

유전 알고리즘을 이용한 고압 수소저장용기 중량 최적화 (Optimization on Weight of High Pressure Hydrogen Storage Vessel Using Genetic Algorithm)

  • 이영헌;박으뜸;김정;강범수;송우진
    • 소성∙가공
    • /
    • 제28권4호
    • /
    • pp.203-211
    • /
    • 2019
  • In this study, the weight of type IV pressure vessel is optimized through the burst pressure condition using the finite element analysis (FEA) based on the genetic algorithm (GA). The optimization design variables include the thickness of composite layers and the winding angles. The optimized design variables are validated using the numerical simulations for the pressure vessel. Consequently, the weight is decreased by about 6.5% as compared to the previously reported results for Type III pressure vessel. Additionally, a method which reduces the entire optimization time is proposed. In the original method, the population size is constant across all generations. However, the proposed method could reduce the workload through the reduction of the population size by half for every 25 generations. Thus, the proposed method is observed to increase the weight by about 0.1%, however, the working time for the optimization could be decreased by about 46.5%.

Extended cognitive reliability and error analysis method for advanced control rooms of nuclear power plants

  • Xiaodan Zhang;Shengyuan Yan;Xin Liu
    • Nuclear Engineering and Technology
    • /
    • 제56권9호
    • /
    • pp.3472-3482
    • /
    • 2024
  • This study proposes a modified extended cognitive reliability and error analysis method (CREAM) for achieving a more accurate human error probability (HEP) in advanced control rooms. The traditional approach lacks failure data and does not consider the common performance condition (CPC) weights in different cognitive functions. The modified extended CREAM decomposes tasks using a method that combines structured information analysis (SIA) and the extended CREAM. The modified extended CREAM performs the weight analysis of CPCs in different cognitive functions, and the weights include cognitive, correlative, and important weights. We used the extended CREAM to obtain the cognitive weight. We determined the correlative weights of the CPCs for different cognitive functions using the triangular fuzzy decision-making trial and evaluation laboratory (TF-DEMATEL), and evaluated the importance weight of CPCs based on the interval 2-tuple linguistic approach and ensured the value of the importance weight using the entropy method in the different cognitive functions. Finally, we obtained the comprehensive weights of the different cognitive functions and calculated the HEPs. The accuracy and sensitivity of the modified extended CREAM were compared with those of the basic CREAM. The results demonstrate that the modified extended CREAM calculates the HEP more effectively in advanced control rooms.

Development of a New Method for Whole-Body Working Postures: K-OWAS

  • Kim, Yu-Chang;Kim, Dae-Su
    • 대한인간공학회지
    • /
    • 제31권1호
    • /
    • pp.165-170
    • /
    • 2012
  • Objective: The aim of this study is to develop new K-OWAS on the basis of the anthropometry of Koreans considering works in shipbuilding and heavy industry for evaluation whole-body working postures. Background: Work Related Musculoskeletal Disorders(WMSDs) were a leading cause of sick leaves and injuries in the industries of our country. Especially, awkward working postures and handling of heavy weight are known as a main cause of WMSDs. OWAS, RULA and REBA are much used as the method for evaluating the awkward working postures. OWAS is the working postures evaluation method that can be used for the evaluation of whole-body working postures. OWAS was the method made based on the anthropometry of the foreigner, working postures and weight does not fit our work state. Method: This method was evaluated considering the anthropometry of the Koreans, working postures and weight in shipbuilding and heavy industry work state in Korea. Results: Correlation of action level of OWAS and subjective discomfort for each body parts were not statistically significant($p{\geq}0.1$). But correlation of action level of K-OWAS and subjective discomfort for torso and waist were statistically significant($p{\leq}0.1$). Conclusion: K-OWAS was suitable in the evaluation of upper body including torso and waist. Application: New method for whole-body working postures from this study prevent WMSDs and help improvement of working environment and design of working method.

바이모달 음성인식의 음성정보와 입술정보 결합방법 비교 (Comparison of Integration Methods of Speech and Lip Information in the Bi-modal Speech Recognition)

  • 박병구;김진영;최승호
    • 한국음향학회지
    • /
    • 제18권4호
    • /
    • pp.31-37
    • /
    • 1999
  • 잡음환경에서 음성인식 시스템의 성능을 향상시키기 위해서 영상정보와 음성정보를 이용한 바이모달(bimodal)음성인식이 제안되어왔다. 영상정보와 음성정보의 결합방식에는 크게 분류하여 인식 전 결합방식과 인식 후 결합방식이 있다. 인식 전 결합방식에서는 고정된 입술파라미터 중요도를 이용한 결합방법과 음성의 신호 대 잡음비 정보에 따라 가변 입술 파라미터 중요도를 이용하여 결합하는 방법을 비교하였고, 인식 후 결합방식에서는 영상정보와 음성정보를 독립적으로 결합하는 방법, 음성 최소거리 경로정보를 영상인식에 이용 결합하는 방법, 영상 최소거리 경로정보를 음성인식에 이용 결합하는 방법, 그리고 음성의 신호 대 잡음비 정보를 이용하여 결합하는 방법을 비교했다. 6가지 결합방법 중 인식 전 결합방법인 파라미터 중요도를 이용한 결합방법이 가장 좋은 인식결과를 보였다.

  • PDF

단계투기법에 의한 준설점토의 체적비 산정 (Estimation of volume Ratio according to Step up Filling Method for a Dredged Clay)

  • 이송;강명찬
    • 한국지반공학회논문집
    • /
    • 제16권1호
    • /
    • pp.167-178
    • /
    • 2000
  • 준설매립 공사시 자중압밀침하량 및 체적변화비 예측을 위해 사용되는 Yano 방법의 단점을 보완하고실제 준설매립 공사시 준설토가 연속적으로 투기되며 퇴적고의 상승이 토층의 증가와 침강 및 자중압밀에 의한 체적감소의 결과로 표현되어지는 것을 고려한 단계투기법에 의한 새로운 해석기법에 대한 시험적 연구를 수행하였다. 단계투기시험에 의해 투기속도와 퇴적고 상승속도의 관계를 측정하여 현장 매립계획고에 소요되는 현장투기 완료일수를 산정하였고 그때 소요되는 전체 투기높이 그리고 이에 해당하는 실질토량고를 산정하여 이를 바탕으로 현장투기완료 후 자중압밀 침하량 및 체적변화비,함수비, 간극비의 변화를 예측하였고, 전체투기 시험을 통한 Yano법에 의한 산정결과와 비교 분석하였다. 자중압밀 침하량의 경우 약 29.8%, 체적비의 경우 31.1%, 공극비 및 함수비가 약 40%정도 전체투기에 의한 Yano 법이 단계투기법에 의한 결과보다 작게 평가되었다.

  • PDF

역도 인상동작 성공 시 최대 바벨무게 예측 (The Forecasting a Maximum Barbell Weight of Snatch Technique in Weightlifting)

  • 하종규;류지선
    • 한국운동역학회지
    • /
    • 제15권3호
    • /
    • pp.143-152
    • /
    • 2005
  • The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

임신 중 체중변화와 임부 및 신생아 상태에 관한 연구 (The studies about the weight-changes during pregnancy and the condition of mother and infant)

  • 박광희
    • 부모자녀건강학회지
    • /
    • 제4권1호
    • /
    • pp.68-81
    • /
    • 2001
  • This research is to study about the weight-change of a pregnant woman, conditions of the woman and an infant. The weight-change of a mother during pregnancy was observed and that was expressed as the basis on the body mass index of a mother before pregnancy. The effects of weight-changes on both the discomfort, complications of pregnant mother and the condition of an infant were also investigated. Thus we set a purpose that this study would help pregnant woman and an infant to maintain and enhance their health conditions by proper weight control through nursing mediation. This study was performed in a certain hospital of university in seoul from Feb. 1. 2000 to Mar. 31. 2000. We explained the purpose of this study to the hospital institution and obtained consent of investigation. 152 inpatients who were in condition from PA 37 weeks to PA 42 weeks were the subject of this study. The research materials were made through of question paper that inpatients make answer by themselves and investigation paper. The question paper was about general background, weight and height before pregnancy and discomfort of the physical degree. And the investigation paper was about parity, maternal weight(late pregnancy), high pregnancy, delivery method, hemoglobin level, Apgar score, fetal weight. Physical discomfort was measured using the implement made by Kim hae won(1996) (chronbach's ${\alpha}=0.85$). SPSS was used to do statistics for managing and analyzing data. The results of this study were like followings. 1. The mean value of gained weight during pregnancy was about 13.8kg within from 3 kg to 26 kg. Among 152 research candidates, the gained weight of 80(52.6%) candidates remained within an ideal range. But that of 37 candidates(24.3%) became less than the ideal range. Also that of 35 candidates(23.0%) became over than the ideal range. 2. In the investigation of the relation between the weight change of a pregnant woman and her condition, the scores to represent physical discomfort were middle in all candidates. And the physical discomfort of over weight-gained group was more than that of low weight-gained group, but there was no difference in statistics(F=0.234, p=0.791). The weight-changes of pregnant woman didn't have an influence with the high risk of pregnancy(F=0.509, p=0.477). Also, the weight-changes didn't have an influence on delivery method($x^2=3.825$, p=0.148). However, in the investigation of the relation between weight-change and hemoglobin level, the change of hemoglobin level was highest in over weight gained group(F=3.062, p=0.05). 3. In the investigation of the weight-change of pregnant woman and the condition of infant. the weight changes didn't have an influence on both 1 min Apgar score(F=0.157, p=0.855) and 5 min Apgar score(F=0.030, p=0.970) of infant. Also, in the investigation of weight-change of a pregnant woman and weight difference of a infant with Pearson Correlation Coefficient, the weight-change of a pregnant woman affected vastly the weight of a infant. It was also found that the more pregnant woman gained in weight, the more did gain weighty infants. This relation was in net proportion(r=0.256, p=0.001). In conclusion, these results suggest that the weight-changes during pregnancy in Korea women of these days are more increased than that of the past days and individual variation in weight-changes is very high. Also, these results suggest that the changed hemoglobin level of a mother and weight of an infant were meaningfully affected by the weight-changes of a pregnant woman during pregnancy. However, the physical discomfort of a pregnant woman, the high risks of pregnancy, the delivery method and Apgar score of an infant were not affected by the weight-changes during pregnancy. Because the recommendation suggesting the ideal weight-change, used this study, is basis on the subject of American women, therefore, these results also suggest the necessity of such recommendation which is subject to Korean women.

  • PDF