• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.761-767
• /
• 2007

This study was conducted to determine the effects of exogenous zinc-metallothionein (Zn-MT) on anti-oxidative function and pork quality. After feeding a corn-soybean meal-based diet for two weeks, 48 pigs ($Duroc{\times}Landrace{\times}Chinese\;Black Pig$) were assigned randomly to four groups. Pigs in Group 1 were maintained under non-stress conditions, whereas pigs in Groups 2, 3 and 4 were aggressively handled for 25 min to produce stress. Pigs in Groups 1, 2, 3, and 4 received intramuscular administration of saline (control group; CON), 0 (negative control group; NCON), 0.8 (low dose group; LOW), and 1.6 (high dose group; HIGH) mg rabbit liver Zn-MT per kg body weight, respectively. Pigs were slaughtered at 3 and 6 h post-injection. Zn-MT treatment increased (p<0.05) the activities of superoxide dismutase (SOD) and glutathione-peroxidase (GSH-PX) while decreasing the concentration of malondialdehyde (MDA) in liver. These responses were greater (p<0.05) at 6 h than at 3 h post Zn-MT injection. Zn-MT treatment increased (p<0.05) hepatic SOD mRNA levels in a time and dose-dependent manner and decreased (p<0.05) serum glutamate-pyruvate transaminase and lactate dehydrogenase activities (indicators of tissue integrity). Zn-MT administration decreased (p<0.05) lactate concentration and increased (p<0.05) pH and water-holding capacity in the longissimus thorasis meat. Collectively, our results indicate that intramuscular administration of Zn-MT to pre-slaughter stressed pigs improved tissue anti-oxidative ability and meat quality.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.399-408
• /
• 1998

The effect of low molecular alginates feeding on the cholesterol levels and fatty acid compositions of rat serum and liver lipid were investigated. After one week basal diet feeding, four week old Sprague-Dawley male rats were fed with water soluble and acid $\cdot$alkali soluble alginate extracted from sea mustard (Undaria pinnatifida) and giant kelp (Macrocystis pyrifera), and their low molecular alginates prepared by the HCl partial hydrolysis. The feeding efficiency of the alginate fed group was ranged in 0.37$\~$0.44, which was 0.03$\~$0.05 lower than that of the basal diet group. Also, there was much less increase of liver weight in the alginate fed group. The water soluble alginate showed more significant effect in reducing the total cholesterol, free cholesterol, LDL-cholesterol, triglyceride and phospholipid of serum and liver lipid than the acid$\cdot$alkali soluble alginate. The effect was much better with low molecular alginate (reducing effect by the low-molecularization : Water soluble alginate - serum lipid; total cholesterol $59\%$, free cholesterol $65\%$, LDL-cholesterol $96\%$, triglyceride $50\%$, and phospholipid $36\%$. liver lipid: total cholesterol $4\%$, free cholesterol $62\%$, LDL-cholesterol $44\%$, triglyceride $33\%$, and phospholipid $44\%$. acid$\cdot$alkali soluble alginate - serum lipid; total cholesterol $52\%$: free cholesterol $97\%$, LDL-cholesterol $78\%$ triglyceride $32\%$, and phospholipid $64\%$. liver lipid; total cholesterol $11\%$, free cholesterol $12\%$, LDL-cholesterol $10\%$, triglyceride $27\%$, and phospholipid $21\%$). The effect of low molecular alginate feeding on the fatty acid composition of serum and liver lipid reflects the remarkable increase of polyenoic acid, over $44\%$ in serum lipid and about $70\%$ in liver lipid, comparing to the cholesterol fed group. The overall results indicated that feeding of low molecular alginates improves physiological function of rats by changing the serum and liver lipid composition.

• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.417-428
• /
• 2005

Today, IT organizations perform projects with vision related to marketing and financial profit. The objective of realizing the vision is to improve the project performing ability in terms of QCD. Organizations have made a lot of efforts to achieve this objective through process improvement. Large companies such as IBM, Ford, and GE have made over $80\%$ of success through business process re-engineering using information technology instead of business improvement effect by computers. It is important to collect, analyze and manage the data on performed projects to achieve the objective, but quantitative measurement is difficult as software is invisible and the effect and efficiency caused by process change are not visibly identified. Therefore, it is not easy to extract the strategy of improvement. This paper measures and analyzes the project performance, focusing on organizations' external effectiveness and internal efficiency (Qualify, Delivery, Cycle time, and Waste). Based on the measured project performance scores, an OT (Opportunity Tree) model was designed for optimizing the project performance. The process of design is as follows. First, meta data are derived from projects and analyzed by quantitative GQM(Goal-Question-Metric) questionnaire. Then, the project performance model is designed with the data obtained from the quantitative GQM questionnaire and organization's performance score for each area is calculated. The value is revised by integrating the measured scores by area vision weights from all stakeholders (CEO, middle-class managers, developer, investor, and custom). Through this, routes for improvement are presented and an optimized improvement method is suggested. Existing methods to improve software process have been highly effective in division of processes' but somewhat unsatisfactory in structural function to develop and systemically manage strategies by applying the processes to Projects. The proposed OT model provides a solution to this problem. The OT model is useful to provide an optimal improvement method in line with organization's goals and can reduce risks which may occur in the course of improving process if it is applied with proposed methods. In addition, satisfaction about the improvement strategy can be improved by obtaining input about vision weight from all stakeholders through the qualitative questionnaire and by reflecting it to the calculation. The OT is also useful to optimize the expansion of market and financial performance by controlling the ability of Quality, Delivery, Cycle time, and Waste.

• Korean journal of communication and information
• /
• v.43
• /
• pp.209-246
• /
• 2008

This research is a comparative analysis of article titles in the beginning period of Korean newspapers. The Independent, The Korea Daily News and The Dong-A Ilbo were chosen for this research because each was the representative newspaper of 1890s, 1900s and $1920s{\sim}1930s$ respectively. In result, The Independent's article titles had been appeared on nearly 2 years after its first issue. Before the appearance of titles, The Independent had divided articles only with section names. In 1900s, The Korean Daily News's article titles was longer than those of The independent. And in 1910, the titles of The Korean Daily News had been placed on separated line to divide articles clearly. But during these period, typographical development of titles was not shown and the width of title was remained in one column. This means, the function of title in these periods was not to represent the value of article but only to divide the articles. In 1920s, The Dong-A Ilbo had used big size types and multi-column edit and those changes enabled newspaper to introduce the concept of layout. During the decade of 1930s, The Dong-A Ilbo's titles had occupied more space on newspaper than earlier period. This could be explained from the perspective of sensationalism of commercial newspaper and a tendency of putting more weight on titles. On the dimension of expression, proportions of subjective titles in The Independent, The Korea Daily News were 44.4% and 28.3% each, but the subjective titles of The Dong-A Ilbo in 1920's were only 4.2%. This decrease can be explained by the settlement of objective journalism in Korean newspapers during $1920s{\sim}1930s$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.2
• /
• pp.87-96
• /
• 2003

The purposes of this study were to find out the optimum intensity of magnetic field where magnetism could promote the activity of osteoblast, and to discover the possibility of clinical application in the areas of dental implants and bone grafts by confirming the effect of clinically increasing bone formation. In this experiment, we used the Neodymium magnet, which had magnetic power six times as strong as the current ones and enabled the resistances against the demagnetization up to 20 to 50 times to be minimized with the size of 1mm in sight. In order to culture cells, a specially designed device was used. It was made to adjust the distance and accordingly to control the intensity of the magnetic field, by placing the cell culture plate in the center with a magnet of 1mm long and thick installed on the both ends. Using MC3T3-E1 cell, a kind of osteoblast-like cell, we cultured, for 24 hours, not only the test group which had been cultured under the magnetic fields with different intensity of 5, 10, 50, 100, 500, and 1000 Gauss, but also the control group excluding the influences of the magnetic field. After observing the cell's form and the density of the culture medium through an inverted microscope, we made a series of proceedings needed for the immunofluoroscence staining, such as fixation, normal serum reaction, primary antibody reaction, and secondary antibody reaction. And with a fluorescence microscope, we observed those-above and compared the frequency of expression of IFG-1 receptor. To make a Western immunoblotting analysis, the cells cultured under the same condition as the above had the procedure of the lysis buffer and the acrylamide gel electrophoresis was carried out. Protein transferred into the nitrocellulose membrane and tested on the primary and the secondary antibody reactions was observed and compared. The results were as follows: When observed through an inverted microscope, the nuclear divisions of the cells under the magnetic field of 10 Gauss were the most active, and the density of the cells could be observed the most enormously. As the result of an immunofluoroscence staining of IGF-1 receptor, the expression of IFG-1 was the most frequently observed under the magnetic field of 10 Gauss. On the other hand, few differences of consideration were made between the test group cultured under the magnetic fields of 5, 500, and 1000 Gauss and the control group. In respect of the expression of IFG-1 receptor, the test group cultured under the magnetic fields of 50 and 100 Gauss were higher than the control group, and lower than that cultured under the magnetic field of 10 Gauss.(p<0.05) According to the Western immunoblotting analysis, the band of IFG-1 receptor which had 85KDa of molecular weight was the darkest. Judging from the above-mentioned results, the growth factor receptor of an osteoblast cell which was an important criterion for the bone formation was increased in maximum under the magnetic field of 10 Gauss. Moreover it was observed that the optimum intensity of magnetic field in which magnetism made the activity of the osteoblast cell increase was about 10 Gauss.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.1
• /
• pp.87-94
• /
• 2012

We evaluated the bioavailability of a novel organic Ca supplement chelated with milk protein (CaMP) in growing rats and compared it with those of Ca carbonate and Ca citrate. Four-week-old male rats were divided into six groups (n=6/group) and fed AIN-93G-based experimental diets containing three Ca sources, Ca carbonate, Ca citrate, and CaMP at two levels, normal (0.5%, w/w) and high (1.5%, w/w), for 6 weeks. Growth, mineral contents of serum, Ca content and breaking force of femur, and Ca absorption were measured. There were no significant differences in weight gain or food intake, but food efficiency ratio (FER) of CaMP in the high Ca group was higher than those of other groups. Ca and P concentrations in serum were within normal range in all experimental rats. There was no difference in Ca content of the femur among all of the groups. Although there was no statistical significance in bone breaking force of the femur among the groups, the CaMP groups had a higher breaking force compared to other groups. Further, Ca absorption rate significantly increased in the CaMP groups (p<0.05). These results demonstrate that the CaMP supplement did not exhibit any negative effect on growth or Ca metabolism of the rats. Therefore, CaMP can be recommended as a good Ca supplement with regard to bone metabolism and Ca bioavailability.

• Journal of the Korean Society of Radiology
• /
• v.7 no.6
• /
• pp.403-408
• /
• 2013

This study made a tentative estimation of the shielding rate of barium compound by thickness through monte carlo simulation to apply medical radiation shielding products that can replace existing lead. Barium sulfate($BaSO_4$) was used for the shielding material, and thickness of the shielding material specimen was simulated from 0.1 mm to 5 mm by applying $15{\times}15cm^2$ of specimen area, $4.5g/cm^3$ of density of barium sulfate, and $11.34g/cm^3$ density of lead. Entered source was simulated with 10kVp Step in consecutive X-ray energy spectrum(40 kVp ~ 120 kVp). Absorption probability in 40 kVp ~ 60 kVp showed same shielding rate with lead in 3 mm ~ 5 mm of thickness, but it was identified that under 2 mm, the shielding rate was a bit lower than the existing lead shielding material. Also, the shielding rate in 70 kVp ~ 120 kVp energy band showed similar performance as the existing lead shielding material, but it was tentatively estimated as fairly low shielding rate below 0.5 mm. This study estimated the shielding rate of barium compound as the thickness function of x-ray energy band for medical radiation through monte carlo simulation, and made comparative analysis with existing lead. Also, this study intended to verify application validity of the x-ray shielding material for medical radiation of pure barium sulfate. As a result, it was estimated that the shielding effect was 95% higher than the existing lead 1.5 mm in at least 2 mm thickness of barium compound in medical radiation energy band 70 kVp ~ 120 kVp, and this result is considered valid to be provided as a base data in weight lightening production of radiation shielding product for medical radiation.

• Journal of Life Science
• /
• v.21 no.8
• /
• pp.1149-1155
• /
• 2011

Myostatin (MSTN) belongs to the transforming growth factor-${\beta}$ superfamily or growth and differentiation factor 8 (GDF-8), and functions as a negative regulator of skeletal muscle development and growth. Previous studies in mammals have suggested that myostatin knock-out increased muscle mass and decreased fat content compared to those of the wide type. Recently, several studies on myostatin have beenconducted on the block myostatin signal pathway with myostatin antagonists and the MSTN regulation with RNAi to control myostatin function. This study was performed to analyze growth and muscle alteration of Oncorhychus masou by treatment with recombinant myostatin prodomains derived from fish. We designed myostatin prodomains derived from P. olivaceus (pMALc2x-poMSTNpro) and S. schlegeli (pMALc2x-sMSTNpro) in a pMALc2x expression vector, and then purified the recombinant proteins using affinity chromatography. The purified recombinant proteins were treated in O. masou through an immersion method. Recombinant protein treated groups did not show a significant difference in weight, protein, or lipid composition compared to the control. However, there was a difference in the average number and area for histological analyses in the muscle fiber. At twelve and twenty-two weeks from the initial treatment, there were differences in averagefiber number and area between the 0.05 mg/l treated-group and the control, but the numbers were similar to those of the control during the same time period. At twelve weeks, however, 0.2 mg/l treated-group had an increase in average fiber number and decrease in average fiber area compared to the control. At twenty-two weeks, the pMALc2x-sMSTNpro 0.2 mg/l treated-group was induced and showed a decrease in average fiber number and increase in average fiber area. The results between twelve and twenty-two weeks showed that the fiber numbers had decreased, whereas average fiberarea had increased due to sMSTNpro. It is understood that the sMSTNpro induced only hyperplasia at twelve weeks, after which it induced hypertrophy. Recombinant myostatin prodomains derived from fish may induce hyperplasia and hypertrophy in O. masou depending upon the time that has elapsed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.12
• /
• pp.2008-2020
• /
• 2020

Objective: This study was conducted to investigate the effects of dietary corn resistant starch (RS) on the intestinal morphology and barrier functions of broilers. Methods: A total of 320 one-day-old broilers were randomly allocated to 5 dietary treatments: one normal corn-soybean (NC) diet, one corn-soybean-based diet supplementation with 20% corn starch (CS), and 3 corn-soybean-based diets supplementation with 4%, 8%, and 12% corn resistant starch (RS) (identified as 4% RS, 8% RS, and 12% RS, respectively). Each group had eight replicates with eight broilers per replicate. After 21 days feeding, one bird with a body weight (BW) close to the average BW of their replicate was selected and slaughtered. The samples of duodenum, jejunum, ileum, caecum digesta, and blood were collected. Results: Birds fed 4% RS, 8% RS and 12% RS diets showed lower feed intake, BW gain, jejunal villus height (VH), duodenal crypt depth (CD), jejunal VH/CD ratio, duodenal goblet cell density as well as mucin1 mRNA expressions compared to the NC group, but showed higher concentrations of cecal acetic acid and butyric acid, percentage of jejunal proliferating cell nuclear antigen-positive cells and delta like canonical Notch ligand 4 (Dll4), and hes family bHLH transcription factor 1 mRNA expressions. However, there were no differences on the plasma diamine oxidase activity and D-lactic acid concentration among all groups. Conclusion: These findings suggested that RS could suppress intestinal morphology and barrier functions by activating Notch pathway and inhibiting the development of goblet cells, resulting in decreased mucins and tight junction mRNA expression.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.75-82
• /
• 2011

Five different composition UV-cured poly(urethane acrylate-co-acrylic acid) (PU-co-AA) films have been prepared by reacting isophorone diisocyanate(IPDI), polycaprolactone triol(PCLT), 2-hydroxyethyl acrylate(HEA), and different weight ratio trimethylolpropane triacrylate(TMPTA) and acrylic acid(AA) as diluents, and characterized using a Fourier transform infrared spectroscopy(FT-IR). The adhesion properties onto the stainless steel, morphology, mechanical hardness, and electrical property of UV-cured PU-co-AA films were investigated as a function of acrylic acid(AA) content. All the PU-co-AA films are structure-less and the molecular ordering and packing density decreased with increasing content of AA due to the flexible structure and -COOH side chains in AA. The crosscut test showed that PU-co-AA films without AA and with low content of AA showed 0% adhesion(0B) and the adhesion of PU-co-AA films in the range of 40-50% AA increased dramatically as the content of AA increases. The pull-off measurements showed that the adhesion force of PU-co-AA films to stainless steel substrate varied from 6 to 31 kgf /$cm^2$ and increased linearly with increasing AA content. The mechanical hardness also decreased as the content of AA increases. This may come from relatively linear and flexible structure in AA and low crystallinity in PU-co-AA films with higher content of AA. The higher AA-containing PU-co-AA films showed higher dielectric constant due to the increase of polarization by introducing AA monomer. In conclusion, the physical properties of UV-cured PU-co-AA films are strongly dependent upon the content of AA and the incorporation of AA in polyurethane acrylate is very useful way to increase the adhesion strength of UV-curable polymers on the stainless steel substrate.