• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.637-640
• /
• 1998

Generally, the durability of the reinforced concrete structures reduce when they are constructed in marine environments. The Mg ions and sulfate ions in seawater cause chemical attacks in concrete and the cracks in concrete result from corrosion of steel due to chlorides. In this study, the mortar specimens made from 5 different types of cement were immersed in artificial seawater of 2 times concentration and then we measured the compressive strength, the length change and the weight change. As a result of this study, we found that the compressive strength ratio decreased in the immersed 56days. We also found the longer the immersed days were, the more the increase of weight ratio and the length change were.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.4
• /
• pp.197-202
• /
• 2002

A new method is used to estimate the amount of water evaporation from Class A Pan with higher precision and accuracy. The principle of method is to detect the weight change of a buoyant sinker resulting from a change in water level of Class A Pan. A strain-gauge load cell is used to measure the weight change. Field observation of evaporation was done at Pohang Meteorological Station from June 24 to August 4, 2002. By using this new method, it is possible to measure hourly evaporation accurately even under a strong solar radiation and wind disturbance, enabling a direct comparison of evaporation with other meteorological elements. At night, under low humidity and high wind speed conditions, more evaporation was recorded than during daytime. Maximum evaporation rates observed during this period exceed 1.0 mm/hour under the sunny and windy conditions with low humidity. To understand relationships between meteorological elements and latent heat flux at ground level, we suggest intensive held experiments using high accuracy evaporation recording instruments with hourly time interval.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1259-1263
• /
• 1999

In this paper, a method to guarantee system continuity is developed, which can be applied to discontinuity problem in the time domain of restructurable control system. This method can be summarized as input alternation using weight change considering convergence speed of system mode. Input is changed from 'system continuity guarantee input,' which is defined as a input that minimizes the change of state variables, to 'alternative controller input,' which is selected by Neil's PI/EAM[3]. AIDC aircraft model is used for simulation. By showing the waveform of system input and state variable, we can sure that this method is effective for depression of system shock like jerk.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3353-3360
• /
• 2015

This study was conducted to identify the BMI of enlisted soldiers, to understand the difference between their BMI and that of other men in their age group, and to identify the influence factors of enlisted soldiers' BMI change. The survey has been conducted self-evaluation questionnaire from 23 Feb. 2009 to 31 Mar. 2009 from 4 different forces as methods. Independent-sample T-test, chi-square test and multiple linear regression analysis were used for statistical analysis from 301 collected data. As a result of surveying enlisted soldiers' BMI, their obesity rate 18.6% was lower than 22.1% of other men in their age group. In terms of health behavior, the underweight&normal weight group(2.39) showed higher diet score than the overweight group(2.13), showing that the underweight&normal weight group ate relatively slowly, less spicy and less sweet food compared to the overweight group. The overweight group(2.25) showed lower satisfaction with their body type than the underweight&normal weight group(2.98), while the overweight group(4.01) showed a significantly higher score than the underweight&normal weight group(3.37) for weight control activity. The influence factors of BMI change were diet habit, subjective perception of body type, and weight control activity. In order to improve of enlisted soldiers' BMI, it would be necessary to improve the food service and the snack bars for interventional control of food that influence obesity, rather than personal effort, in addition, education for right body-shape perception and encouraging on weight control activity.

• The Journal of Korean Physical Therapy
• /
• v.17 no.1
• /
• pp.27-42
• /
• 2005

This study aims to investigate the effect of Early Weight Bearing and Vibration Exercise and is focusing on the difference between changes if experimental before and after on 30 stroke patients. The obtained results are as follows; First, the chang due to Early Weight Bearing and Vibration in the comparison of experimental duration, Early Weight Bearing and Vibration Exercise showed improvement of Bone Density(P<.05). Second, in the comparison of change according to Early Weight Bearing and Vibration Exercise, Bone Density was significantly changed between two experimental group(P<.05). Third, the chang due to Early Welght Bearing and Vibration Exercise, Bone Density of sound femoral head and affected femoral head was significantly changed(P<.05). Fourth, the chang due to Early Weight Bearing and Vibration Exercise, Bone Density of femoral head was significantly changed between two experimental group(P<.05).

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.121-128
• /
• 1996

In order to examine spindle deformation characteristics that affects the performance of dynmic cutting acuracy due to tool weight variation in a experimental spindle. thermal deformation value of operrative spindle by the axial displacement and the radial run out was measured according to the rise of spindle temperature through the laps of operation time and the change of rotational speed under the tool weight variation. A qualitative summary is as follows ; 1) The results show that the tool weight affcets the spindle temperature variation in a experimental spindle. 2) Radial run out and axial displacement was measured according to the rise of the spindle temperature and the performance of dynamic cutting accuracy was affected by the tool weight variation. 3) Axial displacement is 1.3 times larger than the radial run out in a experimental spindle conditions. 4) Axial displacement is continuously elongated when the tool weight is repeatly exchanged since the spindle themal deformaion, however, when the same tool weight is used. the displacement is still constant.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.188-195
• /
• 2022

Although issuing change orders is a common practice in the construction phase of any project, non-structural utility subcontractors are struggling and seek to find a way to reduce change orders. Therefore, this paper presents the analysis results on change orders to cultivate possible suggestions and solutions on how to reduce or minimize change orders in mechanical, electrical, and plumbing (MEP) works. Change orders in non-structural utility works are analyzed based on six categories such as rerouting and change of location, changes in weight, rejected design by Office of Statewide Health Planning and Development, District Structural Engineer, or the Structural Engineer of Record, unforeseen conditions, changed equipment, and owner-initiated change. The analysis findings showed that rerouting and changing location is the most significant cause, followed by unforeseen conditions. The results not only contribute to the existing body of knowledge on change order research area, but also help MEP contractors reduce the time and cost of change orders.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.5
• /
• pp.115-130
• /
• 2020

The purpose of this study is to analyze the difference between A Study on the Weight Change and Exercise Immersion for Activation of Aerobic Dance and to suggest the continuous activation of Aerobic Dance. To achieve this purpose, a questionnaire was conducted using a convenience sampling method, which is one of non-probability sampling, in April 2020, targeting general aerobic dance members in Gyeongnam. The results of this study are as follows. First, the demographic characteristics were partially different. The age was 40 to 49 years, height was more than 160cm, occupation was housewives, weight change was more than -3kg, participation intensity was more than 100 minutes, participation frequency was 4 days, and participation period was less than 5 years. Second, the results of this study are as follows: Weight Change(Body Confidence, Activity Confidence, Dance Confidence, Psychological Stability Effect, Dance Activity Effect, Perform-motion Effect) and Exercise Immersion(Behavior immersion, Cognitive immersion) were partially high There was a difference. Third, the results of this study are as follows: Weight Change(Body Confidence, Activity Confidence, Dance Confidence, Psychological Stability Effect, Dance Activity Effect, Perform-motion Effect) and Exercise Immersion(Behavior immersion, Cognitive immersion) were partially high It was shown that the influence was.

• Environmental Engineering Research
• /
• v.12 no.5
• /
• pp.224-230
• /
• 2007

The objectives of this study were to evaluate the change of molecular weight (MW) profiles in natural organic matter (NOM) through various treatment processes (coagulation, granular activated carbon (GAC), and ozonation) using high performance size exclusion chromatography based on ultraviolet absorbance and dissolved organic detection (HPSEC-UVA-DOC). In addition, relationships between MW profiles and disinfection by-production (DBP) formation were evaluated. Each treatment process results in significant different effects on NOM profiles. Coagulation is effective to remove high molecular weight NOM, while GAC is effective to remove low molecular weight NOM. Ozonation removes only a small portion of NOM, while it induces a significant reduction of UV absorbance due to breakdown of the aromatic groups. All treated waters are chlorinated, and chlorination DBPs such as trihalomethanes (THMs) and haloacetic acids (HAAs) are measured under formation potential conditions. Both THM and HAA formation potentials were significantly reduced through the coagulation process. GAC was more effective to reduce THM formation compared to HAA formation reduction, while ozonation showed significant HAA reduction compared to THM reduction.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.2
• /
• pp.184-193
• /
• 1994

This paper considers the Updating Minimum-weight Spanning Tree Problem(UMP), that is, the problem to update the Minimum-weight Spanning Tree(MST) in response to topology change of the network. This paper proposes the algorithm which reconstructs the MST after several links deleted and added. Its message complexity and its ideal-time complexity are Ο(m＋n log(t＋f)) and Ο(n＋n log(t＋f)) respectively, where n is the number of processors in the network, t(resp.f) is the number of added links (resp. the number of deleted links of the old MST), And m=t＋n if f=Ο, m=e (i.e. the number of links in the network after the topology change) otherwise. Moreover the last part of this paper touches in the algorithm which deals with deletion and addition of processors as well as links.