• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.122-128
• /
• 2014

In this paper, we consider the periodic preventive maintenance model for a repairable system following the expiration of extended warranty under replacement-repair warranty. Under the replacement-repair warranty, the failed system is replaced or minimally repaired by the manufacturer at no cost to the user. Also, under extended warranty, the failed system is minimally repaired by the manufacturer at no cost to the user during the original extended warranty period. As a criterion of the optimality, we utilize the expected cost rate per unit time during the life cycle from the user's perspective. And then we determine the optimal preventive maintenance period and the optimal preventive maintenance number by minimizing the expected cost rate per unit time. Finally, the optimal periodic preventive maintenance policy is given for Weibull distribution case.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권4호
• /
• pp.229-239
• /
• 2013

This paper reports a manner to use a Bayesian approach to derive the optimal replacement policy. In order to produce a system with minimal repair warranty, a replacement model with the extended warranty is considered. Within the warranty period, the failed system is minimally repaired by the manufacturer at no cost to the end-user. The failure time is assumed to follow a Weibull distribution with unknown parameters. The expected cost rate per unit time, from the end-user's viewpoints, is induced by the Bayesian approach, and the optimal replacement policy to minimize the cost rate is proposed. Finally, a numerical example illustrating to derive the optimal replacement policy based on the Bayesian approach is described.

• Journal of the Korean Data and Information Science Society
• /
• 제23권6호
• /
• pp.1195-1202
• /
• 2012

본 논문에서는 최소수리의 비용이 시스템의 수명시간에 의존하는 경우에 연장된 보증이 주어진 수리가 가능한 시스템에 대하여 사용자 측면에서의 총기대비용을 구하였다. 이를 위해서 연장된 보증을 정의하고 사용자 측면에서 연장된 보증이 종료된 이후의 교체모형을 가정하였다. 특히, 시스템의 교체모형에서 사용자가 연장된 보증을 선택하기 위한 기준을 제시하였으며, 시스템의 고장시간이 와이블 분포를 따를 때 수치적 예를 통하여 이를 설명하였다.

• 정보학연구
• /
• 제10권2호
• /
• pp.47-64
• /
• 2007

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. Accurate predictions of software release times, and estimation of the reliability and availability of a software product require quantification of a critical element of the software testing process : test coverage. This model called enhanced non-homogeneous poission process(ENHPP). In this paper, exponential coverage and S-coverage model was reviewed, proposes the exponentiated exponential coverage reliability model, which maked out efficiency substituted for gamma and Weibull model(2 parameter shape illustrated by Gupta and Kundu(2001). In this analysis of software failure data, algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on SSE statistics for the sake of efficient model, was employed.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권1호
• /
• pp.1-15
• /
• 2011

Automobile markets are so fierce in the world market that every major manufacturer assure the buyer of the car by give a provocative warranty plan for their cars. For instance Hyundai motor company offer 10 years and 100,000 miles of warranty whichever comes first. But in order for this effort to be successful every critical component such as window switch has to be proven to be reliable in an adverse environment. Therefore, in this article reliability assessment criteria for window switch are established in terms of basic performance test, environment test and life test.

• 한국해양공학회지
• /
• 제19권2호
• /
• pp.47-52
• /
• 2005

This paper introduces a procedure for free span and fatigue analysis of offshore pipelines per DNV-RP-F105, 2002. The new method includes the axial force and deflection load in pipelines. The screening criteria were established to calculate the allowable span lengths in the new design codes. The screening criteria allows a certain amount of vortex-induced vibration due to wave and current loading. However, the induced pipe stresses are very small and usually below the limit stresess of typical S-N curves. In contrast, the conventional criteria did not allow any vortex-induced vibration in the free span of pipelines. Thus, the screening criteria yields reduced allowable span lengths. A simplified procedure was established to calculate the fatigue damage due to long-term current distribution. The long-term current statistics was assumed with a 3-parameter Weibull distribution. The fatigue damage was estimated for the span lengths obtained from the screening criteria for various conditions. Sample calculations show the effect of axial force for various boundary conditions. Comparisons with conventional criteria are included.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.84-87
• /
• 1988

cIn this paper. we evaluate the breakdown and TDDB characteristics of ammonia free ECVD SiN films which studied widely as a gate insulator to substitute the silicon dioxide because of it's superior film characteristics with the merit of low temperature process. And also, we propose a new statistical model by introduce a dispersion factor in the traditional Weibull statistics. From the comparison of experimental result, and simulation one, try to dock the breakdown mechanism and statistical analysis.

• 응용통계연구
• /
• 제9권1호
• /
• pp.53-73
• /
• 1996

일정형 및 계단형 가속수명시험의 시험설계에 대한 일반적인 모형과 최적설계에 대한 최근의 연구결과를 소개하고, 수명분포가 와이블인 경우에 대하여 두가지 시험방법에 대한 최적설계를 점근분산의 행태, 설계변수의 효과, 최적시험조건에서 시험종결 시점까지의 기대고장개수 및 기대시험종결시간, 점근분산의 상대적효율과 설계변수의 사전추정치에 대한 둔감성의 측면에서 비교, 분석하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권3호
• /
• pp.195-218
• /
• 2009

Wiper motors are used in every automobile. They are exposed to a very diverse environment and consists of several components and, therefore needs careful approach to the enhancement and assessment of reliability of the item. In this article reliability standards for wiper motors are established in terms of quality certification test and failure rate test.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.29-33
• /
• 2002

A procedure of free span and fatigue analysis of offshore pipelines was made per DNV-RP-F105, 2002. The new method includes the axial force and deflection load in pipelines. The screening criteria were used to calculate the allowable span lengths. The screening criteria allow small amplitudes of vortex-induced vibration due to wave and current loading. However, the induced pipe stress is very small and usually below the limit stress of a typical S-N curve. A simplified method was established to calculate the fatigue damage due to long-term current distribution. The long-term current statistics was assumed with a 3-parameter Weibull distribution. The fatigue damage was estimated for the span lengths obtained from the screening criteria for various conditions. Sample calculations show the effect of axial force for various boundary conditions.