• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.331-337
• /
• 1998

This study was carried out to derive optimal design floods by Weibull-3 distribution with the annual maximum series at seven watersheds along Man, Nagdong, Geum, Yeongsan and Seomjin river systems. Adequacy for the analysis of flood data used in this study was acknowledged by the tests of Independence, Homogeneity, detection of Outliers. Parameters were estimated by the Methods of Moments and L-Moments. Design floods obtained by Methods of Moments and L-Moments using different methods for plotting positions in Weibull-3 distribution were compared by the rotative mean error and relative absolute error. It has shown that design floods derived by the method of L-moments using Weibull plotting position formula in Weibull-3 distribution are much closer to those of the observed data in comparison with those obtained by method of moments using different formulas for plotting positions in view of relative mean and relative absolute error.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.3
• /
• pp.45-55
• /
• 2000

This study was carried out to derive optimal design low flows bythe Weibull-3 and Wakeby distributions for the partial consecutive duration series at seven watersheds along Han. nagdong, Geum Yeongsan and Seomjin river systems. L-coefficient of variation L-skewness and L-kurtosis were calculated by the L-moment ratio respectively. Parameters were estimated by the method of L-Moments with consecutive duration. Design low flows obtained by method of L-Moments using with consecutive duration, Design low flows obtained by method of L-Moments using different methods for plotting positions formulas in the Weibull-3 and Wakeby distributions were compared by the Root Mean Square Errors(RMSE). It has shown that design low flows derived by the method of L-moments using Weivull plotting position formula in Wakeby distribution were much closer to those of the observed data in comparison with those obtained by the methods of L-moments with the different formulas for plotting positions in Weibull-3 distribution from the viewpoint of Root Mean Square Errors.

• Wind and Structures
• /
• v.19 no.4
• /
• pp.371-387
• /
• 2014

Probability plotting positions are popular and used as the basis for distribution fitting and for inspecting the quality of the fit because of its simplicity. The plotting positions that lead to excellent approximation to the mean of the order statistics should be used if the objective of the fitting is to estimate quantiles. Since the mean depends on the sample size and is not amenable for simple to use closed form solution, many plotting positions have been presented in the literature, including a new plotting position that is derived based on the weighted least-squares method. In this study, the accuracy of using the new plotting position to fit the Gumbel distribution for estimating quantiles is assessed. Also, plotting positions derived by fitting the mean of the order statistics for all ranks is proposed, and an approximation to the covariance of the order statistics for the Gumbel (and Weibull) variate is given. Relative bias and root-mean-square-error of the estimated quantiles by using the proposed plotting position are shown. The use of the proposed plotting position to estimate the quantiles of annual maximum wind speed is illustrated.

• Wind and Structures
• /
• v.16 no.4
• /
• pp.355-372
• /
• 2013

The Gringorten estimator has been extensively used in extreme value analysis of wind speed records to obtain unbiased estimates of design wind speeds. This paper reviews the derivation of the Gringorten estimator for the mean plotting position of extremes drawn from parents of the exponential type and demonstrates how it eliminates most of the bias caused by the classical Weibull estimator. It is shown that the coefficients in the Gringorten estimator are the asymptotic values for infinite sample sizes, whereas the estimator is most often used for small sample sizes. The principles used by Gringorten are used to derive a new Consistent Linear Unbiased Estimator (CLUE) for the mean plotting positions for the Fisher Tippett Type 1, Exponential and Weibull distributions and for the associated standard deviations. Analytical and Bootstrap methods are used to calibrate the bias error in each of the estimators and to show that the CLUE are accurate to better than 1%.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.4
• /
• pp.25-29
• /
• 1999

This study was conducted to derive optimal design floods by Gerneralized Extreme Value(GEV) and Weibull-3 distributions for the annual maximum series at ten watersheds along Han,Nagdong, Geum, Yeongsan and Seomjin reiver systems. Adequency for the analysis of flood data used in this study was established by the tests of Independence. Homogeneity , detection of Outlines, L-moments. Design flood sobtaine dby /methods of Moments and L-Moments using different methods for plotting positions in BEV and Weibull-3 distributions were compared by the Relative Mean Errors(RME) and Root MEan Square Errors(RMSE). The result wa found that design floods derived by the L-moments using the other formulas for plotting positions from the viewpoint of Relative Mean Errors and Root Mean Square Errors.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.5
• /
• pp.11-25
• /
• 2018

The Ln-least method is commonly used to estimate the Weibull parameters from the observed wind speed data. In previous studies, the bin method has been used to calculate the cumulative frequency distribution for the Ln-least method. The purpose of this study is to obtain better performance in the Ln-least method by applying probability plotting position(PPP) instead of the bin method. Two types of the wind speed data were used for the analysis. One was the observed wind speed data taken from three sites with different topographical conditions. The other was the virtual wind speed data which were statistically generated by a random variable with known Weibull parameters. Also, ten types of PPP formulas were applied which were Hazen, California, Weibull, Blom, Gringorten, Chegodayev, Cunnane, Tukey, Beard and Median. In addition, in order to suggest the most suitable PPP formula for estimating Weibull parameters, two accuracy tests, the root mean square error(RMSE) and $R^2$ tests, were performed. As a result, all of PPPs showed better performances than the bin method and the best PPP was the Hazen formula. In the RMSE test, compared with the bin method, the Hazen formula increased estimation performance by 38.2% for the observed wind speed data and by 37.0% for the virtual wind speed data. For the $R^2$ test, the Hazen formula improved the performance by 1.2% and 2.7%, respectively. In addition, the performance of the PPP depended on the frequency of low wind speeds and wind speed variability.

• Communications for Statistical Applications and Methods
• /
• v.14 no.3
• /
• pp.561-576
• /
• 2007

Five plotting positions are applied to the computation of probability weighted moments (PWM) on the parameters of the generalized logistic distribution. Over a range of parameter values with some finite sample sizes, the effects of five plotting positions are investigated via Monte Carlo simulation studies. Our simulation results indicate that the Landwehr plotting position frequently tends to document smaller biases than others in the location and scale parameter estimations. On the other hand, the Weibull plotting position often tends to cause larger biases than others. The plotting position (i - 0.35)/n seems to report smaller root mean square errors (RMSE) than other plotting positions in the negative shape parameter estimation under small samples. In comparison to the maximum likelihood (ML) method under the small sample, the PWM do not seem to be better than the ML estimators in the location and scale parameter estimations documenting larger RMSE. However, the PWM outperform the ML estimators in the shape parameter estimation when its magnitude is near zero. Sensitivity of right tail quantile estimation regarding five plotting positions is also examined, but superiority or inferiority of any plotting position is not observed.

• Journal of Korean Society for Quality Management
• /
• v.9 no.1
• /
• pp.51-60
• /
• 1981

This paper deals with the estimation of the Weibull parameters, which have a close relation with product reliability characteristics. Among the many kinds of estimation methods, Ishikawa's Weibull Probability Paper (WPP) is commonly used. The WPP is very convenient, but it has a great disadvantage in estimation accuracy by plotting method. It is very difficult to get the same results even if one use the same data several times. A computer program for the regression method is used for the parameter estimation to reduce these errors.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2271-2273
• /
• 1999

The manufacturing technology of XLPE power cable ( e.g. gas curing, triple common extrusion, clean room, super-clean compound, etc.) had been developed in 1960's and the design parameter of insulation thickness for EHV XLPE power cable at present was determined in 1960's. But, the quality of XLPE power cable has been improved up to now. The re-evaluation of design parameter for insulation thickness reductions is required and so we performed weibull plotting test using model cable. This paper describes the evaluation details of the insulation characteristics according to weibull plotting test.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.531-536
• /
• 1999

This study was carried out to derive optimal design drought flows by the Weibull-3 and Wakeby distributions for the annual drought flows series at seven watersheds along Han, Nagdong, Geum, Yeongsan and Seomjin river systems. L-coefficient of variation , L-skewness and L-kurtosis were calculated by the L-moment ratio respectivley. Parameters were estimated by the Methods o fL-Moments with continuous duration. Design drought flows obtained by Methods of L-Moments using Weibull plotting positions formula in the Weibull-3 and Wakeby distributions were compared by the Relative Mean Errors(RME), Relative Absolute Errors (RAE) and Root Mean Square Errors(RMSE). It has shown that design drought flows by the Wakeby distribution using method of L-moments are much closer to those of the observed data in comparison with those obtained by the Weibull-3 distribution using method of L-moments.