• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권1호
• /
• pp.65-76
• /
• 2013

In order to assess the reliability of engine mount for a vehicles, life test model and procedure are developed. By using this method, failure mechanism and life distribution are analyzed. The main results are as follows; i) the main failure mechanism is degradation failure of engine mount rubber by fatigue failure at dynamic load. ii) temperature is a second factor to affect a failure. iii) the life distribution of engine mount module is fitted well to Weibull life distribution and the shape parameter is 18.4 and the accelerated life model of that is fitted well to Arrhenius model.

• 대한의용생체공학회:의공학회지
• /
• 제37권1호
• /
• pp.21-30
• /
• 2016

Weibull distribution with two parameters, shape (k) and scale (s) parameters are used to model the fatigue failure analysis due to periodic vortex shedding of the synovial fluid in knee joints. In order to determine the later parameter, a suitable statistical model is required for velocity distribution of synovial fluid flow. Hence, wide applicability of Weibull distribution in life testing and reliability analysis can be applied to describe the probability distribution of synovial fluid flow velocity. In this work, comparisons of three most widely used methods for estimating Weibull parameters are carried out; i.e. the least square estimation method (LSEM), maximum likelihood estimator (MLE) and the method of moment (MOM), to study fatigue failure of bone joint due to periodic vortex shedding of synovial fluid. The performances of these methods are compared through the analysis of computer generated synovial fluidflow velocity distribution in the physiological range. Significant values for the (k) and (s) parameters are obtained by comparing these methods. The criterions such as root mean square error (RMSE), coefficient of determination ($R^2$), maximum error between the cumulative distribution functions (CDFs) or Kolmogorov-Smirnov (K-S) and the chi square tests are used for the comparison of the suitability of these methods. The results show that maximum likelihood method performs well for most of the cases studied and hence recommended.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.61-66
• /
• 2010

Engineering asset management (EAM) requires the accurate assessment of current and the prediction of future asset health condition. Suitable mathematical models that are capable of predicting time-to-failure and the probability of failure in future time are essential. In general reliability models, lifetime of component and system is estimated using failure time data. This paper deals with the reliability assessment of elevators using life of main components. Especially this work is concerned with the stochastic nature of life of elevator components. First, we investigate the Weibull statistical analysis of lifetime data for the components. The final goal is to establish the mathematical model for reliability assessment. This work provides more perspectives to future research in the fields of reliability and maintainability.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.1903-1910
• /
• 2009

본 연구에서는 소프트웨어 제품을 개발하여 테스팅을 거친 후 사용자에게 인도하는 시기를 결정하는 방출문제에 대하여 연구하였다. 인도시기에 관한 모형은 무한 고장수에 의존하는 비동질적인 포아송 과정을 적용하였다. 이러한 포아송 과정은 소프트웨어의 결함을 제거하거나 수정 작업 중에도 새로운 결함이 발생될 가능성을 반영하는 모형이다. 고장발생 수명분포는 여러 분포들을 적합시키는데 효율적인 특성을 가진 와이블분포를 이용하였다. 따라서 소프트웨어 요구 신뢰도를 만족시키고 소프트웨어 개발 및 유지 총비용을 최소화시키는 방출시간이 최적 소프트웨어 방출 정책이 된다. 본 논문의 수치적인 예에서는 고장 간격 시간 자료를 적용하고 모수추정 방법은 최우추정법과 추세분석을 통하여 자료의 효율성을 입증한 후 최적 방출시기를 추정하였다.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.139-149
• /
• 2002

This paper presents an approach to derive probability models for use in structural reliability studies. Two main points are made. First, that it is possible to translate engineering and physics knowledge into a requirement on the form of a probability model. And second, that making assumptions about a probability model for structural failure implies either explicit or hidden assumptions about material and structural properties. The work is foundational in nature, but is developed with explicit examples taken from planar and general stress problems, the von Mises failure criterion, and a modified Weibull distribution.

• 정보학연구
• /
• 제10권2호
• /
• pp.47-64
• /
• 2007

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. Accurate predictions of software release times, and estimation of the reliability and availability of a software product require quantification of a critical element of the software testing process : test coverage. This model called enhanced non-homogeneous poission process(ENHPP). In this paper, exponential coverage and S-coverage model was reviewed, proposes the exponentiated exponential coverage reliability model, which maked out efficiency substituted for gamma and Weibull model(2 parameter shape illustrated by Gupta and Kundu(2001). In this analysis of software failure data, algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on SSE statistics for the sake of efficient model, was employed.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.843-846
• /
• 2015

In this paper, the failure mechanism of PTC heater were examined closely by failure analysis and based on it, accelerated life test were conducted. Finally, life distribution and acceleration model were established. The failure mechanism of PTC heater such as crack, increase of resistance due to heating were identified. Two acceleration factors such as temperature, humidity were chosen with two levels each and accelerated life test were done. Life distribution were identified as Weibull distribution with shape parameter 5.4 and Temperature-Humidity model was fitted as an acceleration model.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.129-137
• /
• 2004

This paper presents an accelerated life test for burnout of tungsten filament of incandescent lamp. From failure analyses of field samples, it is shown that their root causes are local heating or hot sports in the filament caused by tungsten evaporation and wire sag. Finite element analysis is performed to evaluate the effect of vibration and impact for burnout, but any points of stress concentration or structural weakness are not found in the sample. To estimate the burnout life of lamp, an accelerated life test is planned by using quality function deployment and fractional factorial design, where voltage, vibration, and temperature are selected as accelerating variables. We assumed that Weibull lifetime distribution and a generalized linear model of life-stress relationship hold through goodness of fit test and test for common shape parameter of the distribution. Using accelerated life testing software, we estimated the common shape parameter of Weibull distribution, life-stress relationship, and accelerating factor.

• 대한산업공학회지
• /
• 제25권4호
• /
• pp.466-475
• /
• 1999

A backward Dynamic Programming(DP) model for the optimal facility replacement decision problem during a finite planning horizon is presented. Multiple alternative challengers to a current defender are considered. All facilities are assumed to have finite service lives. The objective of the DP model is to maximize the profit over a finite planning horizon. As for the cost elements, purchasing cost, maintenance costs and repair costs as well as salvage value are considered. The time to failure is assumed to follow a weibull distribution and the maximum likelihood estimation of Weibull parameters is used to evaluate the expected cost of repair. To evaluate the revenue, the rate of operation during a specified period is employed. The cash flow component of each challenger can vary independently according to the time of occurrence and the item can be extended easily. The effects of inflation and the time value of money are considered. The algorithm is illustrated with a numerical example. A MATLAB implementation of the model is used to identify the optimal sequence and timing of the replacement.

• 한국정보처리학회논문지
• /
• 제6권8호
• /
• pp.2060-2071
• /
• 1999

소프트웨어 시스템이 복잡해지면 고장의 원인이 하나의 강도함수에 의해서만 일어나지 않고 여러 원인이 중첩되어 발생할 수 있다. 이러한 복잡한 시스템에 의한 우도함수의 계산상의 어려움 때문에 반복표본을 이용하는 깁스 샘플링 기법이 고려되었다. 관찰된 고장시점은 중첩모형으로 표현이 가능한 잠재(latent)변수들을 이용하여 깁스 알고리즘을 적용하였다. 단순모형과 중첩모형의 비교를 위해 사후베이즈 요인과 상대오차의 합을 이용하여 모형선택을 시도하였다. 수치적인 예에서 GOS 속성을 가진 Goel-Okumoto 모형과 Weibull 모형을 선택하고 NHPP의 자료는 Lewis와 Shedler[25]에 의해 제시된 Thining 알고리즘을 이용하여 발생된 자료를 이용하고 사전분포는 상대적으로 확산분포(diffuse priors)를 이용한 모수추정과 사후베이즈요인과 상대오차를 이용한 모형선택을 한 결과 단순모형들 보다 중첩모형이 좋은 형으로 간주할 수 있음을 보여 주었다.