• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.429-434
• /
• 2001

This paper has been presented the dynamic effect by the journal speed, eccentricity and source positions in order to overcome the defects of air bearing such as low stiffness and damping coefficient. Choosing two row sources position of air bearing is different from previous investigations in the side of pressure distribution of air film by the wedge effects. An experimental study was performed to compare theoretical analysis. The dynamic stiffness was measured in actual cutting. It helps predicting of air spindle s characteristic in machining of die more precisely. The results of investigated characteristics was applied to air spindle for high speed milling.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.491-494
• /
• 2002

To assess the electrostatic interaction of surfaces at the triple contact line, the electrostatic field is analyzed by using the finite element method. The Helmholtz free energy is used as a functional which should be minimized under an equilibrium condition. The numerical results are compared with the nonlinear analytical solution for a two-dimensional charged interface and linear solution for a wedge shaped geometry, which shows fairly good agreement. The method is applied to the analysis of electrostatic influence on the contact angle on a charged substrate. The excess free energy found to increase drastically as the contact angle approaches to zero. This excess free energy Plays an opposite role to the Primary electrocapillary effect, as the contact angle gets smaller. This enables an alternative explanation for the contact-angle saturation phenomenon occurring in electrical control of surface tension and contact angle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1210-1216
• /
• 2001

The impinging tones by high-speed plane jets are investigated for the characteristics of edgetone generation based on experimental observations. Experiment has been performed for edgetones with a slit nozzle and a wedge system. The jet in the experiment is varied from low to high subsonic speed to obtain the effect of the speed on the frequency characteristics of impinging tones. The experimental data obtained previously for edgetones and platetones by various nozzles are compared with the present edgetone data for the condition of tone generation, the frequency ranges and the effective source point. It is found that the jet speed has no fundamental influence on the impinging tone characteristics. Regardless of the jet speed, the effective source point is about a quarter wavelength downstream from the edge tip. With increase in jet speed, the influence of the nozzle configuration is decreased and the operating frequencies show good coincidencies by normalized parameters based on the slit thickness.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.657-662
• /
• 2000

This paper presents the results from experimental study that investigated to explore the load transfer characteristics of post-tensioning anchorage zones. The experimental program investigated the primary variables which affect the ultimate load, lateral strains and crack width: concrete compressive strength, details of reinforcement and shape of anchorage. Through this research, it was found that the governing factor of the ultimate load was not compressive cylinder strength but tensile splitting strength. Ultimate load was increased and lateral strain was decreased as the ratio of spiral increased because the lateral expansion of th concrete inside the spiral was restrained by the spiral. Furthermore, the shape of anchorage which can diminish the wedge effect of anchorage and disperse the anchorage force in various depths was more effective.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.792-797
• /
• 2003

A helical vane is applied to reduce the magnitude of the impulse wave discharged from the exit of a duct. A shock tube with an open end is used to investigate the effect of the helical vanes on the impulse wave magnitude. Four different types of helical vanes are installed into the low-pressure tube of shock tube. The magnitude of the incident shock wave is varied below 1.25, and the magnitude of impulse wave is measured using a pressure transducer mounted on a wedge probe. Instant images of the impulse wave are obtained by means of the Schlieren optical method. The present experimental results show that the helical vane considerably reduces the magnitude of the impulse wave and the vane effects are more remarkable for stronger incident shock wave.

• 대한물리치료과학회지
• /
• 제18권4호
• /
• pp.59-64
• /
• 2011

Purpose : The purpose of this study was to evaluate the effects of the stretching of the calf muscles on foot pressure and contact area in young adult. Participants stood on a wedge board that was sloped between 15~25 degree for 15min. After stretching participants stood quietly on force plate, result was recorded. Participants stood on a force plate for 1 min in eye closed condition, and them the foot pressure and area was recorded. The following variables were calculated off-line: anterior and posterior foot pressure and contact area, medial and lateral foot pressure and contact area. Results showed that anterior pressure change due to stretch, but mediolateral was not significant. This result suggested that stretching of the calf muscle has the effect of increasing anterior pressure by flexibility change on calf muscle, so this effects might be effective intervention for reduce of serious problem to neurologic patients in therapy session.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.101-107
• /
• 1996

In this study, the wedge splitting test (WST) specimens with various strength levels were tested to investigate the fatigue crack growth behavior of concrete. Selected test variables were concrete compressive strength with 2 levels (28 MPa, 60 MPa, 100 MPa) and maximum fatigue loading with 2 levels (75%, 85%). Fatigue testing was preceded by fracture energy test and the crack growth was measured by means of the compliance calibration method, 60 WST specimens were cast for the fatigue test, and 6 companion cylinders ($\phi$100${\times}$ 200 mm) for each batch. In fatigue test, the frequency of loading cycle was 1 Hz, and the minimum fatigue loading level was 5~10 % of ultimate monotonic loading. On the basis of the experimental results, a fracture mechanics-based empirical relationships for fatigue crack growth rate (da/dN-$\Delta$KI relationships) were presented. In addition, the effect of initial notch depth on the fracture energy and the validity of compliance calibration technique for the WST were shown.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.53-59
• /
• 2001

In this Paper, the resistance performances of twin hull forms, which are simplified as two-dimensional wedge shape, are experimentally investigated in low and middle speed ranges to find out the effect of distance between two hulls and fore-body shape for the future hull form development of catamaran type sweeping vessel. The model tests are performed for seven different cases for three models in the circulating water channel(CWC) of Inha Technical College. The free surface flows are observed together to investigate the relation between resistance performance and free surface characteristics. A conceptual design for the modification of bow hull form is presented and the efficiency is discussed.

• 대한치과의사협회지
• /
• 제57권11호
• /
• pp.654-663
• /
• 2019

This case report describes the management of a 30-year-old woman with hopeless mandibular first molars and right maxillary second premolar. The treatment plan included mandibular second and third molar protraction after extraction of mandibular first molars. Mini-implants were placed between roots of first and second premolar. Sliding mechanics with lever arm was used to prevent inclination of molars. A good functional occlusion was achieved in 38 months without clinically significant side effects. Most of the extraction space of mandibular first molar was closed by protraction of second and third molars. The skeletal Class II pattern was improved by counterclockwise rotation of mandible through reduction of wedge effect. Mandibular molar protraction with orthodontic mini-implants in adequate cases would be a great alternative to prosthetic implant and reduce the financial and surgical burden of patients.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.837-840
• /
• 2006

This paper presents the experimental results on the development length of FRP tendons by direct pullout test. Two types of FRP tendons, namely, CFCC tendon and KICT tendon, and PS tendon were investigated. The development length defined as the minimum embedment length required to develop the ultimate tensile strength was suggested using the test results. It was found that the development length from the direct pullout test was greater than those of various standards. This may result from the fact that the wedge effect does not exist because there is no prestressing force in the direct pullout test. Further study and experiment are necessary to derive the reasonable development length for FRP tendon.