• Steel and Composite Structures
• /
• v.26 no.4
• /
• pp.463-471
• /
• 2018

The bolted end-plate beam-column connections have been widely used in steel structure and composite structure because of its excellent seismic performance. In this paper, the end-plate bolted connection is applied in the concrete structure, A new-type of fabricated beam-column connections with end-plates is presented, and steel plate hoop is used to replace stirrups in the node core area. To study the seismic behavior of the joint, seven specimens are tested by pseudo-static test. The experimental results show that the new type of assembly node has good ductility and energy dissipation capacity. Besides, under the restraint effect of the high-strength stirrup, the width of the web crack is effectively controlled. In addition, based on the analysis of the factors affecting the shear capacity of the node core area, the formula of shear capacity of the core area of the node is proposed, and the theoretical values of the formula are consistent with the experimental value.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.39.1-39.1
• /
• 2020

We examine how the mass assembly of central galaxies depends on their location in the cosmic web. The HORIZON-AGN simulation is analysed at z~2 using the DISPERSE code to extract multi-scale cosmic filaments. We find that the dependency of galaxy properties on large-scale environment is mostly inherited from the (large-scale) environmental dependency of their host halo mass. When adopting a residual analysis that removes the host halo mass effect, we detect a direct and non-negligible influence of cosmic filaments. Proximity to filaments enhances the build-up of stellar mass, a result in agreement with previous studies. However, our multi-scale analysis also reveals that, at the edge of filaments, star formation is suppressed. In addition, we find clues for compaction of the stellar distribution at close proximity to filaments. We suggest that gas transfer from the outside to the inside of the haloes (where galaxies reside) becomes less efficient closer to filaments, due to high angular momentum supply at the vorticity-rich edge of filaments. This quenching mechanism may partly explain the larger fraction of passive galaxies in filaments, as inferred from observations at lower redshifts.

• The KIPS Transactions:PartD
• /
• v.18D no.1
• /
• pp.35-44
• /
• 2011

Memory errors can cause not only program malfunctions but also even unexpected system halt. Though a programmer checks memory errors, some memory errors with low occurrence frequency are missed to detect. In this paper, we propose a method for effectively detecting such memory errors using instruction transition diagrams through analyzing assembly codes obtained by disassembling an executable file. Out of various memory errors, local memory return errors, null pointer access errors and uninitialized pointer access errors are targeted for detection. When applying the proposed method to various programs including well-known open source programs such as Apache web server and PHP script interpreter, some potential memory errors are detected.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.591-596
• /
• 2001

To deliver new products to market in a due time, companies often develop their products with numerous partners distributed around the world. Internet technologies can provide a cheap and efficient basis of collaborative product development among distributed partners. This paper provides a framework and its product database model that can support consistent product data during collaborative product development. This framework consists of four components for representing consistent product structure: the product configuration, assembly structure, multiple representations and engineering changes. A product database model realizing the framework is designed and implemented as a system that supports collaborative works in the areas of product design and technical publication. The system enables participating designers and technical publishers to complete their tasks with shared and consistent product data. It also manages the propagation of engineering changes among different representations for individual participants. The Web technologies introduced in this system enable participants to easily access and operate shared product data in a standardized and distributed computing environment.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.161-169
• /
• 2006

The study proposes component models in developing an efficient platform for internet-based structural analysis. Since a structural analysis requires an operation of complicated algorithms, a client-side computation using X-Internet is preferred to a server-side computation to provide a flexible service for multi-users. To compete with the user-friendly interfaces of available commercial analysis programs, a window-based interface using Smart Client was applied. Also, component-based programming was performed with the considerations on reusability and expandability so that active Preparation for future change or modification could be feasible. The components describe the whole system by subdivision and simplification. In the relationship between upper-and lower-level components and also in the relationship between components and objects, a unified interface was used to clearly classify the connection between the libraries. By performing data communication between different types of platforms using XML WebService, a conner-stone of data transfer is proposed for the future integrated CAE. The efficiency of the developed platform has been examined through a sample structural analysis and design on planar truss structures.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.1.1-1.1
• /
• 2011

Electrospinning has known to be very effective tool for production of versatile one-dimensional (1D) nanostructured materials such as nanofibers, nanorod, and nanotubes and for easily assembly to two-, three-dimensional(2D, 3D) nanostructures such as thin film, membrane, and nonwoven web, etc. We have studied on the electrospinning technology for novel energy storage and conversion materials such as advanced separator, dye sensitized solar cell, supercapacitor, etc. High heat-resistive nanofibrous membrane as a new separator for future lithium ion polymer battery was prepared by electrospinning of PVdF based composite solution. The novel nanofibrous composite nonwovens have tensile strength of above 50 MPa and modulus of above 1.3 GPa. The internal structure of the electrospun composite nanofiber with a diameter of few hundreds nanometer were composed of core-shell nanostructure. And also electrospun $TiO_2$ nanorod/nanosphere based dye-sensitized solar cells with high efficiency are successfully prepared. Some battery performance will be introduced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1357-1360
• /
• 2004

In this paper, a prototype of agent-based engineering system is developed based on the AADE (autonomous agent development environment), a FIPA compliant agent platform. By applying several advanced technologies including software agents, Internet/Web, workflow and database, the developed prototype system is able to successfully fulfill our target of integrating personnel, design activities and engineering resources along a predefined engineering design project (workflow). A software prototype is implemented to integrate various engineering software tools including CAD, structural analysis (FEA), dynamic analysis, fatigue analysis. A wheel-axle-assembly (part of a bogie system) is chosen as a test case for the validation of the prototype system.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.6
• /
• pp.765-770
• /
• 2015

Recent sequencing technology development has revolutionized fields of microbial ecology. MiSeq-based microbial community analysis allows us to sequence more than a few hundred samples at a time, which is far more cost-effective than pyrosequencing. The approach, however, has not been preferably used owing to computational difficulties of processing huge amounts of data as well as known Illumina-derived artefact problems with amplicon sequencing. The choice of assembly software to take advantage of paired-end sequencing and methods to remove Illumina artefacts sequences are discussed. The protocol we suggest not only removed erroneous reads, but also dramatically reduced computational workload, which allows even a typical desktop computer to process a huge amount of sequence data generated with Illumina sequencers. We also developed a Web interface (http://biotech.jejunu.ac.kr/ ~abl/16s/) that allows users to conduct fastq-merging and mothur batch creation. The study presented here should provide technical advantages and supports in applying MiSeq-based microbial community analysis.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.2
• /
• pp.140-146
• /
• 2009

MAPSI(Management and Analysis for Polyketide Synthase Type I) has been developed to offer computational analysis methods to detect type I PKS(polyketide synthase) gene clusters in genome sequences. MAPSI provides a genome analysis component, which detects PKS gene clusters by identifying domains in proteins of a genome. MAPSI also contains databases on polyketides and genome annotation data, as well as analytic components such as new PKS assembly and domain analysis. The polyketide data and analysis component are accessible through Web interfaces and are displayed with diverse information. MAPSI, which was developed to aid researchers studying type I polyketides, provides diverse components to access and analyze polyketide information and should become a very powerful computational tool for polyketide research. The system can be extended through further studies of factors related to the biological activities of polyketides.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2414-2417
• /
• 2005

Compact Camera Module(CCM) is widely used in PDA, Celluar phone and PC web camera. With the greatly increasing use for mobile applications, there has been a considerable demands for high speed production of CCM. The major burden of production of CCM is assembly of lens module onto CCD or CMOS packaged circuit board. After module is assembled, the CCM is inspected. In this paper, we developed the image capture board for CCM and the imaging processing algorithm to inspect the defects in captured image of assembled CCMs. The performances of the developed inspection system and its algorithm are tested on samples of 10000 CCMs. Experimental results reveal that the proposed system can focus the lens of CCM within 5s and we can recognize various types of defect of CCM modules with good accuracy and high speed.