• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.5
• /
• pp.31-46
• /
• 1999

A drying paper strives to shrink due to the shrinkage of the individual paper fibres. Laboratory results show that a reduction of the shrinkage or an imposed stretch leads to a large increase in tensile stiffness and a large decrease in strain at break. In c cylinder drying section the water in the web is repeatedly heated on the drying cylinder and evaporated in the free draw. To evaluate the drying process regarding influence on paper properties these sub-processes, or drying phases, have to be studied separately. The effect of the conditions on the drying cylinder and on the VacRoll is investigated in pilot trails. Both the fabric tension on the drying cylinder and on the VacRoll reduces the shrinkage of the paper. The laboratory results are used as input to a numerical simulation of the conditions in the free draw. If the web width is increased or the length of the free draw is reduced the mean shrinkage of the paper web is reduced . However, the difference in shrinkage between the middle and the edge of the web is increased.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.147-155
• /
• 2001

A new displacement type web position control system for cold mills using QFT is presented. The control system features an inner-outer cascaded system in which the inner loop provides the position tracking control of the hydraulic system and the outer loop provides the position regulation control of the web. By the sensitivity analysis and computer simulation, it is verified that the proposed control system has better robust stability and performance than the conventional control system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.952-956
• /
• 1997

This paper describes the method that can expand the forming limit of T type forging products used in aircraft and automotive forged products. The forming limitis determined by the ratio of web thickness to rib width in T type and the reduction in height of workpiece and especially depends on the ratio of web thickness to rib width. For this method, the geometric condition that consists of triangle type was introduced and FEM simulations and model exoeriments were carried out and compared with each other. The objective of this paper is to give the method not only that sink mark and folding phenomenon are eliminated but also that the forming limit and the structural strength of rib and web is increased.

• Proceedings of the CALSEC Conference
• /
• 2005.03a
• /
• pp.261-266
• /
• 2005

Web services provide an effective means to carry out coordinated transactions between multiple, independent business parties. While there are several specific protocols currently being discussed to address the coordination of web services-enabled business transactions, we consider the tentative hold protocol (THP) that allows the placement of tentative holds on business resources prior to actual transactions in order to provide increased flexibility in coordination. In this paper, we present a formal coordination framework for applying THP in conjunction with 2PC to the problem in which service providers independently manage resources and clients seek to acquire the resources from multiple providers as a single atomic transaction. The proposed framework facilitates the performance optimization of THP through effective parameterization with the notion of overhold size and hold duration. The simulation results show that the proposed adaptive approach yields a significant improvement over other non-adaptive policies.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.216-218
• /
• 1999

This paper presents an advanced virtual lecture system for power system which is based on web. So far, conventional web-based virtual lecture systems which simply would use hyper-text couldn't use characteristics of multimedia in web. Comparing with printed publication, such conventional virtual lecture systems as only display on monitor couldn't be superior in validity and effectiveness. So, in this paper the proposed virtual lecture system uses web-based multimedia functions, including lecture-note and AOD(Audio on Demand), in order to overcome an individual difference of learning efficiency and suggests simple simulation programs for lecture contents which can be performed directly in on-line.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.10a
• /
• pp.113-121
• /
• 1996

AI7075 alloy has been used for aircraft components since it has the advantage of high strength, high toughness, and high corrosion resistance. Many airframe components consist of various combinations of rib-web structure. In this study, various process paramenters such as die design, lubricant, ram speed, forging temperature have been investigated using the experiment and F.E.M. simulation to develop the precision forging technology for AI7075. When lubricant is applied to both material and die, shear friction factor is 0.1 which shows best effect of lubricant. It is specific corner radius of die that minimized forging load regarding process conditions, especially according to the ratio of the width of rib and web. In conclusion, optimum corner radius is 2~3mm when the width of rib and web is 3mm and 20mm respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.31-38
• /
• 2002

A new steering-type web position control system for cold mills using QFT is presented. The control system features an inner-outer cascaded system in which the inner loop provides the position tracking control of hydraulic system and the outer loop provides the position regulation control of the web. By the sensitivity analysis and computer simulation, it is verified that the proposed control system has better robust stability and performance than the conventional PH) control system.

• Journal of Mechanical Science and Technology
• /
• v.16 no.12
• /
• pp.1604-1612
• /
• 2002

Rollers in the continuous process systems are ones of key components that determine the quality of web products. The condition of rollers (e.g. eccentricity, runout) should be consistently monitored in order to maintain the process conditions (e.g. tension, edge position) within a required specification. In this paper, a new diagnosis algorithm is suggested to detect the defective rollers based on the frequency analysis of web tension signals. The kernel of this technique is to use the characteristic features (RMS, Peak value, Power spectral density) of tension signals which allow the identification of the faulty rollers and the diagnosis of the degree of fault in the rollers. The characteristic features could be used to train an artificial neural network which could classify roller conditions into three groups (normal, warning, and faulty conditions) The simulation and experimental results showed that the suggested diagnosis algorithm can be successfully used to identify the defective rollers as well as to diagnose the degree of the defect of those rollers.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1679-1686
• /
• 2007

In this paper, we introduce the sharable and reusable learning objects which are suitable for XML Web services in e-learning systems. These objects are extracted from the principles of pedagogical paradigms for reusable learning units. We call them LIO (Learning Item Object) objects. Existing models, such as Web-hosted and ASP-oriented service model, are difficult to cooperate and integrate among the different kinds of e-learning systems. So we developed the LIO objects that are suitable for XML Web services. The reusable units that are extracted from pedagogical paradigms are tutorial item, resource, case example, simulation, problems, test, discovery and discussion. And these units correspond to the LIO objects in our learning object model. As a result, the proposed model is that learner and instruction designer should increase the power of understanding about learning contents that are based on pedagogical paradigms. By using XML Web services, this guarantees the integration and interoperation of the different kinds of e-learning systems in distributed environments and so educational organizations can expect the cost reduction in constructing e-learning systems.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.23-27
• /
• 2015

This paper, discusses about the implementation of the remote control LED Lights in elevator facility Since 1990, the elevator dissemination has greatly increasing. Currently in the elevator most of people they can use smart devices anytime or anywhere to view and retrieve the information by using internet. Therefore, in this paper, efficient management of power LED and LED remote control LED lighting fluid, in order to control features and smart devices can be applied to Web services platform and OS-specific proposals. Additionally based on the configured UI technology and programs offered by the present, and the LED lights are offered through the simulation to efficiently manage technology to demonstrate the usefulness.