Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Steering-Type Web Position Control of Cold Mills Using QFT

QFT를 이용한 냉간 압연시스템의 조타유도형 웹 위치제어

  • Lee, Gyu-Jun (Mechanical Technology Research Center, Dept.of Mechanical Engineering, Busan National University) ;
  • Jeong, Jae-Hyo (Mechanical Technology Research Center, Dept.of Mechanical Engineering, Busan National University) ;
  • Kim, Jong-Sik (Busan National University) ;
  • Choe, Jin-Tae (Research Institute of Industrial Science and Technology)
  • 이규준 (부산대학교 기계공학부 및 기계기술연구소) ;
  • 정재효 (부산대학교 기계공학부 및 기계기술연구소) ;
  • 김종식 (부산대학교 기계공학부) ;
  • 최진태 (포항산업과학연구원)
  • Published : 2002.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

A new steering-type web position control system for cold mills using QFT is presented. The control system features an inner-outer cascaded system in which the inner loop provides the position tracking control of hydraulic system and the outer loop provides the position regulation control of the web. By the sensitivity analysis and computer simulation, it is verified that the proposed control system has better robust stability and performance than the conventional PH) control system.

Keywords

References

  1. Markey, F. J., 1957, 'Edge Position Control for the Steel Strip Industry,' Iron and Steel Engineer, pp. 119-131
  2. Horowitz, I. M., 1993, 'Quantitative Feedback Design Theory(QFT),' QFT Publication
  3. 박명수, 이재원, 1998, '직접식 다변수 정량적 피드백 이론,' 대한기계학회논문집 A 권, 제 22 권, 제 3 호, pp. 562-568
  4. Campbell, D. P., 1958, 'Process Dynamics,' Wiley, New York, pp. 152-156
  5. Soren, S. L., 1996, 'Controlling Web Position,' Automation, Arp., pp. 105-110
  6. Feiertage, B. A., 1967, 'Intermediate Guiding On Steel Strip Processing Lines,' Iron and Steel Engineer, September, pp. 147-155
  7. Shelton, J. J., 1968, Lateral Dynamics of an Moving Web, PhD thesis, Oklahoma State University, Okla
  8. Shelton, J. J, Reid, K. N., 1974, 'Lateral Dynamics of an Idealized Moving Web,' J. Dynamic Systems, Measurement, and Control, pp. 180-186
  9. Shelton, J. J., Reid, R. N., 1971, 'Lateral Dynamics of an Real Moving Web,' J. Dynamics Syntems, Measurement, and Control, pp. 180-186
  10. Besteman, M.P.G.J. et al, 1998, 'Modeling and Identification of a Strip Guidance Process with Internal Feedback,' IEEE Trans. Control systems and Technology, vol. 6, No. 1, pp. 88-102 https://doi.org/10.1109/87.654879
  11. Guo, R. M., Leon, M. V., 1999, 'Design and Simulation of an Entry Edge Guide Control System for Tandem Cold Mills,' J. Manufacturing Science and Engineering, Vol. 121, pp. 69-75 https://doi.org/10.1115/1.2830577
  12. Gere, Timoshenko, 1993, Mechanics of Material, Third Edition, Thomson Publishing
  13. 허준영, 1989, '가변구조 제어를 이용한 유압굴삭기의 자동화에 관한 연구,' 박사학위논문, 부산대학교
  14. Warton, J., 1989, Fluid Power Systems, Prentics Hall
  15. Bryant, G. F., Halikias, G. D., 1995, 'Optimal loop-Shaping for Systems with Large Parameter Uncertainty,' Int. J. Control, Vol. 62, No. 3, pp. 557-568 https://doi.org/10.1080/00207179508921556
  16. Chait, Y., Chen, Q., Hollot, C. V., 1999, 'Automatic Loop-Shaping of QFT Controllers Via Linear Programming,' J. Dynamic System. Measurement, and Control, pp. 351-357