• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.70-75
• /
• 2001

There is a problem to be solved for improvement of durability and safety for concrete When the waterproofing and anticorrosive work of main concrete are design, the material a of construction need to be correctly applied to appropriate circumstance conditions. Epoxy mostly been used for concrete water tank structure. Lately, lots of subjects on adaption res in mortar for waterproofing and anticorrosive are under discussion. Then, we attempt to approach by evaluating and comparing every capabilities with waterproofing materials in this experiment. Capability evaluation items include the bond age and curing conditions, the bond strength after accelerated weathering test and fret impact resistance, a mount of water, seepage quan Through the experiment analysis, we found that waterproofingtity, drinking water chemicals resistance. and anticorrosive resin mortar used with glass fiber cloth, inorgar material is dominantly superior to other waterproofing materials. According to this paper, we suggest the resin mortar as a new surface treatment material water tank structure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.327-333
• /
• 2004

Corestone ground mass has complicated characteristics as it is made up of hard and stiff corestone in a relatively weak and soft matrix. Model corestone ground mass which is physically identical with the stiff corestone in weak matrix were tested in uniaxial compression. The tests show that the increase of the corestone proportion brought the gradual increase of the elastic modulus as well. The ground mass was weaker when the corestone proportion was low while it was stronger in higher corestone proportion. The size of the corestone had no influence on the strength and elastic modulus as long as the proportion of the corestone remains same.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.449-455
• /
• 2001

도로교통소음의 저감을 위해 설치되는 방음벽의 성능평가를 위해서는 흡음률 및 투과손실과 같은 음향성능에 대한 평가뿐만 아니라, 풍압 및 충격하중과 같은 구조성능과 방음판 제작에 사용되는 재질에 관한 성능평가도 수반되어야 한다. 따라서, 본 논문에서는 이러한 방음벽의 성능평가를 위한 음향 구조 및 재질에 관한 시험 및 평가방법을 제시하였다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2002년도 정기학술대회
• /
• pp.157-164
• /
• 2002

본 연구에서는 실생활에 응용되는 Chloroprene계 고무에 대하여 30개월 동안 옥외 폭로를 행하였으며 동시에 Xenon-arc Type의 촉진 내후성시험기를 이용하여 그에 따른 내후성의 변화를 평가하였다. 폭로기간에 따른 인장강도와 신장률의 변화를 측정하였고 폭로면의 표면층에 대하여 FT-IR과 SEM을 사용하여 화학적 특성 및 미세구조를 분석하였다. 태양복사와 습도에 노출된 고무의 표면은 매우 짧은 기간에 파괴되었고, 고무 내부에 존재하는 가교제들의 용출을 확인할 수 있었으며, 산소와의 결합으로 내부층보다 고무의 표면에서 더 많은 가수분해와 광분해가 이루어진다는 것을 확인할 수 있었다. 이와 같은 표면층의 변화와 파괴는 고무의 기계적 성질에도 의미 있는 영향을 주었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.295-298
• /
• 2004

It was revealed that leaching of elements were partly inhibited because seawater contains plenty of dissolved ions than fresh water. On the other hands, the low activity coefficient and the formation of complex with chloride and sulfate play roles in enhancing element leachability. However, the pH buffaring capacity of seawater is the most important factor that makes the leaching of elements and its chemical behavior in the seawater system different from those in the fresh water environments. In general, the leaching from the weathered ash was smaller than that from the fresh ash. However, it was revealed that the leaching of Si, Fe, Al, Mn, phosphate, and some other elements were independent of ash weathering. They were dependant only on the pH of the solutions.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.103-110
• /
• 2000

This paper deal with the stability evaluation and suggestion of progressive failure slope in biotite granite area of Andong. Based on geological site investigation and field test, stability analysis of slope was performed in conjunction with limit equilibrium methods and stereographic projection. Additionally, initial design and construction procedure was critically evaluated. Series of the slope stability analysis reveals the detection of local wedge and plane failure under the current slope condition. It is additionally appeared that a certain synthetic behavior of circle and plane failure exists on the right spot where the overall failure's going in progress. In order to construct more stable slope based on the suitability for the real state of the slope circumstances, this study issues a solution to eliminate the primary factors which cause the instability, by means of the grade of weathering and RMR classification of rock mass.

• 한국응용과학기술학회지
• /
• 제18권4호
• /
• pp.316-324
• /
• 2001

To prepare an acrylic type pressure-sensitive adhesive, quarternary polymers were synthesized from butyl acrylate (BA), 2-ethyl hexyl acrylate (2-EHA), methyl methacrylate (MMA), and 2-hydroxy ethyl methacrylate (2-HEMA). The quarternary polymers were identified by FT-IR and Molecular weight was measured by Gel Pearmeation Chromatography. Also, viscosity, solid content and peel strength were examined. The peel strength was 160 $g_{f}/25$ mm when the volume ratio of feed monomer to solvent was 1.3:1, and the ratio was relevant to commercial usage. The pot life of adhesive was 30 sec at the 50 m/min of heat treatment rate at, and it indicated that the minimum drying time was 30 sec. In weathering resistance test, peel strength of $160{\sim}180$ $g_{f}/25$ mm after 1000 h, with no residual remains on the adhesive surface.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1285-1289
• /
• 2008

Increasing the flood control capacity's link that is enforcing to existing dam by unusual change of weather, While build planing construction by exiting spillway of tunnel type to dam, could know that part bed rock is formed as is different with design. Grasped topography of research area and geology state to definite distribution aspect of different bed rock, Place that achieved Surface geological Survey and correct Survey is difficult in some section enforced Electrical resistivity dipole-dipole investigation. Grasped stratigraphy distribution confirmation and fracture or weathering zone making out siding 2D-Resistivity Electrical resistivity diagram and Reverse analysis diagram, examining closely soil weathered rock rock's distribution state, established stability countermeasure plan

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.61-64
• /
• 2000

FT-IR/ATR analysis shows that the oriental lacquer coating network degrades mostly in the unsaturated side chain. The rate of increase in carbonyl intensity (a measure of photodegradation) during the accelerated weathering test was substantially different for the unstabilized and stabilized samples; adding 2 wt% HALS into the oriental lacquer formulation enhanced photostabilization up to three times. Weight loss measurements, another indication of photodegradation, and SEM analysis support this conclusion. Despite the presence of the photo-stabilizer, the other properties of the lacquer were not significantly affected. In particular, the curing behavior of purified lacquer (PL) and HALS-stabilized samples is similar, although the in-situ DETA analysis showed that addition of HALS can slightly retard the cure reaction rate in oriental lacquer coating. It is hypothesized that this cure retardation may be related to the salt formation between HALS and acid of oriental lacquer.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.30-34
• /
• 2019

Four different diisocyanates (IPDI; isophorone diisocyanate, HDI; hexamethylene diisocyanate, HMDI; dicyclohexylmethane-4,4'-diisocyanate, and XDI; m-xylylene diisocyanate) were used to prepare polyurethane gel-coats, and the weatherabilities, physical properties, and surface characteristics of the gel-coats were investigated with respect to the chemical structure of the diisocyanates. The weathering test results indicated that all of the diisocyanates used in this study were suitable for use in the preparation of the polyurethane gel-coat. However, the set-to-touch times and physical properties of the polyurethane gel-coat indicated that the cycloaliphatic diisocyanate (IPDI and HMDI) were ideal for the preparation of polyurethane gel-coats.