• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.140-146
• /
• 2003

Metal matrix composites had generated a lot of interest in recent time because of their high specific strength and stiffness in specific properties. It was also highlighted as the material of frontier industry because strength, heat-resistance, corrosion-resistance and wear-resistance were superiored. In this study, the strength properties of $Al_{18}B_{4}O_{33}$/AC4CH composites were represented mixing the binder of $SiO_2$. It was also fabricated by squeeze casting. $Al_{18}B_{4}O_{33}$/AC4CH was fabricated at the melt temperature of $760^{\circ}C$, the perform temperature of $700^{\circ}C$ and mold temperature of $200^{\circ}C$ under the pressure of 83.4MPa. Consequently, fatigue life was observed roughly in the order of AC4CH> nobiner> $SiO_2$, independently on crack propagation direction and stress ratio.

• Journal of Korean Biological Nursing Science
• /
• 제21권4호
• /
• pp.308-317
• /
• 2019

Purpose: This study aimed to investigate the level and related factors related to health-promoting lifestyle in operating room nurses in Korea. Method: A cross-sectional descriptive survey design was employed. The data were collected using questionnaire for three weeks in December 2018 from 110 operating room nurses working for more than six months in a general hospital located in Seoul. The Health Promoting Lifestyle Profile-II, The Korean Version of the Practice Environment Scale of Nursing Work Index, and Operating nurse's Job stress Factor Scale were used. Results: Significant relationships were observed between health promoting lifestyle and educational level(p= .025), perceived economic status (p= .001) wearing a lead apron for protection from radiation during the operation(p< .001), work satisfaction(p= .016), and fatigue related to work(p= .006). Also significant correlations were identified between nursing work environment and health promoting lifestyle. However, the health promoting lifestyle was not statistically different based on occupational stress(p= .365). In multiple linear regression analyses, the level of health promoting lifestyle found to be higher in subjects who did not wear a lead apron for protection from radiation(p= .017), and who had more positive perception of the nursing work environment(p= .034). Conclusion: In order to increase health promoting lifestyle of operating nurses, the strategies to improve the nursing work environment are essential.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.239-242
• /
• 2004

We investigated the nanotopography impact on the post-chemical mechanical polishing (post-CMP) oxide thickness deviation(OTD) of ceria slurry with a surfactant. Not only the surfactant but also the slurry abrasive size influenced the nanotopography impact. The magnitude of the post-CMP OTD increased with adding the surfactant in the case of smaller abrasives, but it did not increase in the case of larger abrasives, while the magnitudes of the nanotopography heights are all similar. We created a one-dimensional numercal simulation of the nanotopography impact by taking account of the non-Prestonian behavior of the slurry, and good agreement with experiment results was obtained.

• Macromolecular Research
• /
• 제17권8호
• /
• pp.603-608
• /
• 2009

Novel ultra-high molecular weight polyethylene (UHMWPE)/zirconia composites were previously prepared by the in situ polymerization of ethylene using a Ti-based Ziegler-Natta catalyst supported on to the surface of zirconia, as a bearing material for artificial joints. Tribological tests revealed that a uniform dispersion of zirconia in UHMWPE markedly increased the wear resistance. The effects of zirconia content on the oxidation behavior of the ${\gamma}$-ray-treated UHMWPE/zirconia composite surfaces were examined. The oxidation index that estimates the oxidation degree as the content of total carbonyl compounds was monitored using Fourier transform infrared spectroscopy-attenuated total reflectance. The changes in the surface composition due to the oxidation were confirmed by electron spectroscopy for chemical analysis. The extent of oxidation decreased with increasing zirconia content, which was attributed to the increased crystallinity as well as the decreased polymer portion of the UHMWPE/zirconia composites.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.55-63
• /
• 2001

Friction and wear properties of brake friction materials containing different metal fibers (Al, Cu or Steel fibers) were investigated using a pad-on-disk type friction tester. Two different materials(gray iron and Al-MMC)) were used for disks rubbing against the friction materials. Results from ambient temperature tests revealed that the friction material containing Cu fibers sliding against cast iron disk showed a distinct negative ${\mu}$-ν (friction coefficient vs. sliding velocity) relation implying possible stick-slip generation at low speed. The negative ${\mu}$-ν relation was not observed when the Cu-containing friction materials were rubbed against the. Al-MMC counter surface. As applied loads increased, friction materials showed higher friction coefficients comparatively. Friction materials slid against cast iron disks exhibited higher friction coefficients than Al-MMC disks during high temperature tests. On the other hand, high temperature test results suggested that copper fibers in the friction material improved fade resistance and the steel fibers were not compatible with Al-MMC disks showing severe material transfer and erratic friction behavior during sliding at elevated temperatures.

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.287-293
• /
• 2015

Laser surface texturing (LST), a surface engineering modification, has been considered as one of the new processes used to improve tribological characteristics of materials by creating artificially patterned microstructure on the contact surface of mechanical components. In LST technology, the laser is optimized to obtain or manufacture the dimples with maximum precision. The micro-dimples reduce the coefficients of friction and also improve the wear resistance of materials. This study investigates the effect of dimple density is investigated. For this purpose, a ball-on-disc type tester is used with AISI 52100 bearing steel as the test material. Discs are textured with a 5% and 10% dimple density. Experimental work is performed with normal loads of 5 N, 10 N, and 15 N under a fixed speed of 150 rpm at room temperature. The effect of the textured surface is compared to that of the untextured one. Experimental results show that the textured surface yields lower friction coefficients compared to those of untextured surfaces. Specifically, the 10% dimple density textured surface shows better friction reduction behavior than the 5% dimple density textured sample, and has an 18% improvement in friction reduction compared with the untextured samples. Microscopic observation using a scanning electron microscope (SEM) shows that the major friction mechanisms of the AISI 52100 bearing steel are adhesion, plastic deformation, and ploughing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.997-1003
• /
• 2005

Laser welding of dissimilar metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for SM45C and STS304 with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the dissimilar welding, the welding qualify of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding quality is 1600W of the laser power, 0.85m/min of welding speed and 4m/min of pressure for shielding gas.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.1011-1017
• /
• 2021

An effective measure to prevent the spread of COVID-19 is wearing masks in public places. This solution is highly recommended in many countries all over the world. The objective of this study is to identify the antecedents of citizens' intention to purchase masks during the COVID-19 pandemic. Based on the theory of planned behavior (TPB), the current study analyzes attitudes toward mask-purchasing, subjective norms, and perceived behavioral control, to assess their impact on intention to purchase masks. In total, six variables are examined: attitude toward mask-wearing, subjective norms, perceived behavioral control, perceived severity, perceived susceptibility, and the intention to wear masks. Data are collected from 243 respondents in Ho Chi Minh City, Vietnam. They were processed through by factor analysis and multiple regressions. The results report that all three factors positively affect citizens' intention to buy masks in the following ascending order: Attitude toward mask-purchasing, subjective norms, and perceived behavioral control. Our study is the first research that applies TPB to investigate citizens' intention to purchase masks to during the COVID-19 pandemic. Moreover, this study provides guidelines to the Vietnamese public managers to combat COVID-19 through the purchase of masks. Shopkeepers would be well advised to observe the intentions of consumers toward masks.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.315-323
• /
• 2021

In general, surface treatments of electroless Ni-P coating are extensively applied in the industry due to their excellent properties for considerable wear resistance, hardness, corrosion resistance. This study aims to determine the effect of ultrasonic conditions on the morphology, alumina content, roughness, hardness, and corrosion resistance of electroless Ni-P-Al₂O₃ composite coatings. The characteristics were analyzed by Energy-dispersive X-ray spectroscopy (EDX), x-ray diffractions (XRD), and atomic force microscopy (AFM), etc. In this study, the effect of ultrasonic condition uniformly distributed alumina within Ni-P solution resulting in a smoother surface, lower surface roughness. Furthermore, the corrosion resistance behavior of the coating was analyzed using tafel polarization curves in a 3.5 wt.% NaCl solution at 25 ℃. Under ultrasonic, Al₂O₃ content in Ni-P composite solution increased from 0.5 to 5.0 g/L, Al₂O₃ content at 3.0 g/L was showed a significantly enhanced corrosion resistance. These results suggested that ultrasonic condition was an effective method to improve the properties of the composite coating.

• 지역사회간호학회지
• /
• 제30권3호
• /
• pp.257-270
• /
• 2019

Purpose: This study is designed as a non-equivalent, control group pre/post-test for identifying effectiveness of a workplace walking program using a fitness tracker including individual counseling and tailored text messaging. Methods: Seventy-nine employees from two large companies were allocated into an intervention group (n=39) and a control group (n=40). Participants were asked to wear a fitness tracker (Fitbit Charger HR) during 24-hour, 5-days per week, for 10 weeks. The intervention group was provided with daily walking steps measured by Fitbit, weekly counseling with a specifically designed workbook, and seven weekly text messaging, and the control group with the fitness tracker only. Results: At the week 10 measurement, there were significant differences between the intervention and control groups in physical activity self-efficacy (p<.001), physical activity behavior (p<.001), daily walking steps (p<.001), systolic blood pressure (p=.033), and wellness (p<.001). Conclusion: These results suggest that the workplace walking program using a fitness tracker including individual counseling and tailored text messaging is more effective for persons with 10,000 steps/day. Therefore, it is recommended to actively apply this workplace walking program to inactive employees for encouraging regular physical activities and improving their wellness.