• 한국군사과학기술학회지
• /
• 제18권6호
• /
• pp.771-778
• /
• 2015

In this paper, we have proposed a design method for standardization of weapon information exchange between a weapon control computer of guided missile system and a high echelon command and control system. Because the weapon control computer based on diverse combat platforms is operated with several kinds of a high echelon system, it is necessary to provide a standardized design method for weapon information exchange between mutual system. In fact, it is possible to standardize a interface design specification of weapon information message because weapon information message is closely related to standard tactical data link message. It is essential that the interface design specification of weapon information is submitted to that of tactical data link information. It seems that this interface design specification is very useful in development process of the future weapon system.

• 한국컴퓨터정보학회논문지
• /
• 제26권11호
• /
• pp.101-110
• /
• 2021

무장통제 소프트웨어는 무장체계와 연동하여 함정 전투체계 내 무장 운용을 지원하는 기능을 수행한다. 무장통제 소프트웨어는 무장체계에 의존적이므로 연동 정보 변화에 따라 소프트웨어 수정이 필연적으로 이뤄지는 특성을 가진다. 소프트웨어의 수정은 신뢰성 시험과 같은 검증 단계를 반드시 거쳐야 하므로 개발 비용의 상승을 초래한다. 본 논문에서는 기존 무장통제 소프트웨어의 수정 요소를 최소화하기 위해 무장통제 소프트웨어 표준 아키텍처를 설계하였다. 연동 정보 관리를 위해 휘처 모델(Feature Model)로 공통요소와 가변요소를 구분하였고 디자인패턴 중 전략 패턴(Strategy Pattern)을 적용하여 소프트웨어 구조를 개선하였다. 소프트웨어 평가 실험을 통해 제안한 아키텍처가 기존 무장통제 소프트웨어보다 개발 비용이 감소하고 변경용이성과 재사용성이 향상된 것을 확인하였다.

• 한국산학기술학회논문지
• /
• 제9권3호
• /
• pp.632-637
• /
• 2008

군용 항공기 탑재 무장제어장치는 무장관리시스템의 핵심장비로 조종사의 무장선택, 항공기 상태 및 외부 장착물 장착 상태 등에 따라 선택투하, 비상 투하 및 로켓발사 신호를 생성하여 외부 장착물을 제어한다. 본 논문은 순차 제어회로 설계기법을 이용하여 개발된 무장제어장치의 설계과정 및 성능검증에 대해 기술한다.

• 한국군사과학기술학회지
• /
• 제23권2호
• /
• pp.176-184
• /
• 2020

In this paper, we have proposed hardware and software architecture of a launch control unit for the compatibility between air defense weapon systems loaded on shipboard. Until now, there is no compatibility between weapon systems loaded in battleships of korean navy. In the case of HaeGung system recently completed the test and evaluations, although it will be deployed on several kinds of shipboards, it has no compatibility and flexibility with other air defense weapon systems. Recently it reports that a long range air defense weapon system will be carried on future korean destroyer KDDX. Because the HaeGung and a long range air defense system will be operated together in KDDX, it is necessary to provide the compatibility between two weapon systems. So we have proposed architecture to provide the compatibility of the launch control unit that controls the launching system and the missile interface unit, and the missile in each weapon systems.

• 한국군사과학기술학회지
• /
• 제24권3호
• /
• pp.328-338
• /
• 2021

A study on common modular design based on open standards to reduce the life cycle cost of ground weapon system is underway. Since the ground weapon system includes major mission equipment such as fire control system, it is essential to apply the concept of fault tolerance through automatic reconfiguration and blocking unspecified equipment through connectivity control. However, it is difficult to generalize due to the difference in operating characteristics for each system. In this paper, we propose a plug-and-play framework, which includes plug-and-play architecture and mechanism. The proposed method can be used in common by the application of each component as it is divided into a common service layer. In addition, the proposed connectivity control and autonomous reconfiguration method facilitates reflection of operating characteristics for each system. We constructed a verification environment that can simulate ground weapon systems and components, and verified that the proposed framework works through scenario-based functional tests.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.65-73
• /
• 2004

In general, weapon system design/configuration data consist of system structure information which is linked to Part information, documents and drawings. For configuration management, version and revision control are necessary and access control of users to information should be managed for information security. Configuration data of weapon systems have various kinds of different meta data which are contained in the structure as well as attributes of parts and documents information. If neutral types of meta data models be used for building configuration management system, they can be applied to many different kinds of weapon systems with a little customization. In this paper, five meta data models are supposed and implementation results of them by using CBD(component based design) methodology are presented.

• 시스템엔지니어링학술지
• /
• 제16권1호
• /
• pp.36-42
• /
• 2020

Due to the population of the Republic of Korea is getting less, the shortage of available troops has become a big issue. In response to this, the need for Unmanned weapon systems is rising. To operate an Unmanned weapon system near borderlines or low altitude, it is necessary to protect not only the system itself but also operational information communicated between the Unmanned system and control station, so that they should be safe using Cybersecurity measures. Besides, it is critical to protect a few core technologies applied to Unmanned weapon systems throughout the Anti-Tamper measures. As the precedent studies only focus partially, Cybersecurity or Anti-Tamper, it is acknowledged that comprehensive studies are needed to be conducted. This study is to incorporate both concepts into Korea's defense acquisition process. Specifically, we will outline the concepts and needs of Cybersecurity and Anti-Tamper, and briefly present ways to apply them simultaneously.

• 한국통신학회논문지
• /
• 제39C권11호
• /
• pp.1088-1093
• /
• 2014

소형무장헬기(Light Armed Helicopter, LAH)의 사격통제시스템(Fire Control System, FCS) 구조와 효과적인 군수지원을 고려하여 분산형 FCS 구조에 적합한 공통 무장 인터페이스 모듈(Weapon interface module, WIM)을 제안하였다. FCS를 분산형 구조와 집중형 구조로 구분하여 장단점을 분석하였으며 분산형 구조 FCS의 무장인터 페이스장치(Store Station Interface Unit, SSIU)에 적용되는 공통 WIM을 설계 및 제작하였다. 제안된 공통 WIM은 무장모의기와의 통합 시험을 통해 분산형 FCS에 적용 가능함을 확인하였다. 본 연구를 통해 확보된 공통 WIM 설계 방법은 LAH FCS의 케이블 작업을 경감시키고 여러 종류의 무장 제어에 도움이 되리라 예상된다.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.5-11
• /
• 2006

This paper is launched to get an exact bore-sighting value in the process of assembling for a dual-barrel weapon. Image processing method with a CCD(Charged Coupled Device) camera is chosen for the error reduction of bore-sighting. The results of this method by using a CCD camera and the testing target method are described in this paper. After the performance of the dual-barrel weapon and that of the fire-control system in the dual barrel weapon system is confirmed, the bore-sighting which is a part of the process in the system assembly is accomplished. In this process, the position of the barrel is identified by using the testing target method that is an existing bore-sighting method. Then, the fixing line of the fire-control system is checked by a day-optical part. The precision of the bore-sighting is required within several mils, however the manual method using the naked eyes makes it worse. Therefore, a CCD camera is installed in the eyepieces. Next, we can get an image of the sighting and the center coordinate values of the laser-pointer from each barrel by image processing method. A required bore-sighting value is calculated from the eccentricity of the center coordinate. Finally, It can be applied to adopt this result in the assembling process of the dual-barrel weapon.

• 품질경영학회지
• /
• 제43권3호
• /
• pp.289-298
• /
• 2015

Purpose: This study examined the problem of crack formation in the fire control system(FCS) of the K11 objective individual combat weapon(OCIW), using design of experiment analysis. Three hypothesis were considered. The first hypothesis is that bolted joint has an effect on impulse caused by firing the weapon and the second hypothesis is that a short time interval of shooting has an effect on impulse and lastly, the third hypothesis is that a positive correlation has between the bolted joint of the FCS and the impulse. Methods: The relationship between the bolted joint and the impulse cause by firing the weapon were examined experimentally. The first and second hypothesis was tested using correlation analysis and the t-test. Results: Using ANOVA, the first null hypothesis was rejected and the alternative hypothesis was accepted. ANONA confirmed the second null hypothesis. Correlation analysis dismissed the last null hypothesis. A positive correlation between the bolted joint and the impulse caused by shooting the weapon was verified. Conclusion: The bolted joint of the K11 FCS and the barrel of the K11 affect the impulse caused by firing the weapon. A positive correlation was established between the bolted joint of the FCS and the impulse on firing the K11 OICW.