• 한국통신학회논문지
• /
• 제33권10A호
• /
• pp.949-955
• /
• 2008

본 논문에서는 기존의 에너지 검출기의 성능이 왜곡된 통신 환경에 취약하다는 점을 보완하기 위해 적응형 임계치를 적용한 에너지 검출기를 제안하고 필요한 매개 변수 값을 도출하여 성능을 비교 분석한다. 제안한 방식을 적용한 성능은 사용자의 이동 속도가 느린 채널 상창인 3 km/h와 오경보 확률이 $P_f=10^{-1}$ 인 경우 주로 성능의 이득을 보았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.141-143
• /
• 2004

In this present the transient control of SBS chaos induced instability in Brillouin-active fiber systems is described. The inherent optical feedback by the backscattered Stokes wave in optical fiber systems leads to instabilities in the form of optical chaos. At weak power, the nature of the Brillouin instability can occur at before threshold. At strong power, the temporal evolution above threshold is periodic and at higher intensity can become chaotic. Multistable periodic states, makes transition to logic 'on' or 'off'. It can make theoretically potential large memory capacity.

• 한국컴퓨터산업학회논문지
• /
• 제4권4호
• /
• pp.561-568
• /
• 2003

본 논문에서는 저작권 보호를 위하여 임계값과 Ph코드를 이용한 워터마킹 기법을 제안한다. 저작권을 보호하기 위하여 원 영상을 웨이블릿 변환하여 얻어진 웨이블릿(wavelet) 계수의 LSB(least significant bit)와 워터마크 영상을 동적 임계값을 적용하여 생성한 6장의 이진영상을 각 주파수 영역 HL1, LH1, HL2, LH2, HL3, LH3에 PN코드를 이용하여 좌표를 결정하고 XOR 연산을 하여 워터마크를 삽입한다. 화질 열화가 많은 저주파 영역과 손실압축에 약한 고주파 영역을 제외한 영역에 워터마크를 삽입하였다. 실험결과로써, 화질의 열화가 적은 워터마크 삽입영상을 얻을 수 있었으며, 강인하게 워터마크가 추출이 되었다.

• 한국컴퓨터정보학회논문지
• /
• 제20권11호
• /
• pp.1-8
• /
• 2015

Flash memory has advantages in that it is fast access speed, low-power, and low-price. Therefore, they are widely used in electronics industry sectors. However, the flash memory has weak points, which are the limited number of erase operations and non-in-place update problem. To overcome the limited number of erase operations, many wear leveling techniques are studied. They use many tables storing information such as erase count of blocks, hot and cold block indicators, reference count of pages, and so on. These tables occupy some space of main memory for the wear leveling techniques. Accordingly, they are not appropriate for low-power devices limited main memory. In order to resolve it, a wear leveling technique using bit array and Bit Set Threshold (BST) for flash memory. The proposing technique reduces the used space of main memory using a bit array table, which saves the history of block erase operations. To enhance accuracy of cold block information, we use BST, which is calculated by using the number of invalid pages of the blocks in a one-to-many mode, where one bit is related to many blocks. The performance results illustrate that the proposed wear leveling technique improve life time of flash memory to about 6%, compared with previous wear leveling techniques using a bit array table in our experiment.

• Communications for Statistical Applications and Methods
• /
• 제21권3호
• /
• pp.245-251
• /
• 2014

Two exponential inequalities are established for a wide class of general weakly dependent sequences of random variables, called ${\psi}$-weakly dependent process which unify weak dependence conditions such as mixing, association, Gaussian sequences and Bernoulli shifts. The ${\psi}$-weakly dependent process includes, for examples, stationary ARMA processes, bilinear processes, and threshold autoregressive processes, and includes essentially all classes of weakly dependent stationary processes of interest in statistics under natural conditions on the process parameters. The two exponential inequalities are established on more general conditions than some existing ones, and are proven in simpler ways.

• 한국광학회지
• /
• 제14권4호
• /
• pp.413-422
• /
• 2003

문턱 전류에서 여러 가지 kL과 양 단면 반사율 조합에 대하여 IC DFB 레이저의 파워 추출 효율과 발진 파장 분포를 구하였고 문턱 전류 이상에서의 결과와 비교하였다 양 단면 반사율의 비대칭성이 커질수록 파워 추출 효율이 큼을 알 수 있었다. 문턱 전류 이상에서 파워 추출 효율은 문턱 전류에 비하여 약간 증가하였다. kL이 커질수록 중앙 부분의 광자 밀도가 상대적으로 증가되기 때문에 파워 추출 효율은 감소하였다. 양 단면 반사율 조합의 비대칭성이 증가할수록 모드 degeneracy가 완화되어 발진 파장의 분포는 금지 대역 내에 전체적으로 고르게 분포하였다. 양 단면 반사율 조합이 AR-HR인 경우 문턱 전류와 문턱 전류 이상에서 발진 파장의 분포는 비슷한 형태를 나타냈다. 반면에 양 단면 반사율 조합이 대칭인 AR-AR인 경우 문턱 전류에서의 발진 파장의 분포는 장파장 모드와 단파장 모드 근처에 존재하였으나 문턱 전류 이상에서는 SHB 현상으로 인하여 장파장 모드에 집중적으로 분포하였다. kL이 증가할수록 금지 대역의 폭이 넓어져 발진 파장의 분포도 넓은 영역에 분포함을 알 수 있었다. AR 단면의 반사율에 따른 파워 추출 효율의 변화와 발진 파장의 분포의 변화는 매우 작았다.

• 대한전자공학회논문지SD
• /
• 제47권10호
• /
• pp.1-6
• /
• 2010

본 연구에서는 S-파라미터 측정 데이터를 사용하는 RF측정방법으로 short-channel MOSFET의 RF 캐패시턴스 전압(C-V) 곡선을 상온에서 $225^{\circ}C$까지 추출하였으며, 추출된 고온 종속 특성을 엠피리컬하게 모델링하였다. RF C-V 특성곡선의 weak inversion영역에서 온도 변화에 따른 voltage shift가 threshold voltage shift보다 적은 현상이 관찰되었지만, 기존 long-channel C-V 이론 방정식으로 설명할 수 없는 현상임이 입증되었다. 이러한 short-channel C-V 곡선의 고온 종속 모델링을 위해서 새로운 엠피리컬 방정식이 개발되었다. 이 방정식의 정확도는 모델된 C-V곡선과 측정 데이터가 넓은 온도범위에서 잘 일치하는 결과를 관찰함으로써 입증되었다. 또한, 높은 게이트 전압에서는 온도가 증가함에 따라 채널 캐패시턴스 값이 감소하는 것을 확인할 수 있다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.294-297
• /
• 2007

Steam and advection fogs are frequently observed in the Yellow Sea located between Korea and China during the periods of March-April and June-July respectively. This study uses the remote sensing (RS) data for monitoring sea fog. Meteorological data obtained from the Ieodo Ocean Research Station provided an informative synopsis for the occurrence of steam and advection fogs through a ground truth. The RS data used in this study was GOES-9, MTSAT-1R images and QuikSCAT wind data. A dual channel difference (DCD) approach using IR and near-IR channel of GOES-9 and MTSAT-1R satellites was applied to estimate the extension of the sea fog. For the days examined, it was found that not only the DCD but also the texture-related measurement and the weak wind condition are required to separate the sea fog from the low cloud. The QuikSCAT wind is used to provide a weak wind area less than threshold under stable condition of the surface wind around a fog event. The Laplacian computation for a measurement of the homogeneity was designed. A new combined method of DCD, QuikSCAT wind speed and Laplacian was applied in the twelve cases with GOES-9 and MTSAT-1R. The threshold values for DCD, QuikSCAT wind speed and Laplacian are -2.0 K, 8 m $s^{-1}$ and 0.1, respectively. The validation methods such as Heidke skill score, probability of detection, probability of false detection, true skill score and odds ratio show that the new combined method improves the detection of sea fog rather than DCD method.

• 대한원격탐사학회지
• /
• 제33권4호
• /
• pp.359-375
• /
• 2017

We developed fog detection algorithm (KNU_FDA) based on the optical and textural properties of fog using satellite (COMS) and ground observation data. The optical properties are dual channel difference (DCD: BT3.7 - BT11) and albedo, and the textural properties are normalized local standard deviation of IR1 and visible channels. Temperature difference between air temperature and BT11 is applied to discriminate the fog from other clouds. Fog detection is performed according to the solar zenith angle of pixel because of the different availability of satellite data: day, night and dawn/dusk. Post-processing is also performed to increase the probability of detection (POD), in particular, at the edge of main fog area. The fog probability is calculated by the weighted sum of threshold tests. The initial threshold and weighting values are optimized using sensitivity tests for the varying threshold values using receiver operating characteristic analysis. The validation results with ground visibility data for the validation cases showed that the performance of KNU_FDA show relatively consistent detection skills but it clearly depends on the fog types and time of day. The average POD and FAR (False Alarm Ratio) for the training and validation cases are ranged from 0.76 to 0.90 and from 0.41 to 0.63, respectively. In general, the performance is relatively good for the fog without high cloud and strong fog but that is significantly decreased for the weak fog. In order to improve the detection skills and stability, optimization of threshold and weighting values are needed through the various training cases.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.19-24
• /
• 2006

Fatigue crack propagation tests for the brake disc cast iron were conducted for investigating fatigue crack propagation rate(da/dN), crack propagation path and fracture toughness($K_c$) of the material. The threshold stress intensity factor range, ${\Delta}K_{th}$, was found to be about $6MPa{\sqrt{m}}$ at the stress ratio of R = 0.1. Also, fracture toughness value was determined to be $24.7MPa{\sqrt{m}}$. Irregular fatigue fracture surfaces were observed, indicating that fatigue crack growth occurred at the interface between randomly scattered flak graphite and ferrite, where the interfacial strength was relatively weak.