• Journal of Multimedia Information System
• /
• 제5권3호
• /
• pp.155-162
• /
• 2018

Nowadays, the tracking technology of Quadrant Detector will become actual by new micro devices. Based on the past filed data of the reception experiment with COMETS satellite, we have studied on new device (AD8302, phase difference detector) was acquired and suspect its abilities. In 1998, we have developed a Quadrant Detector for mobile to track a weak signal from satellite on Ka band of COMETS. The Quadrant Detector is comprised of four dedicated feed components for reception under an environment of Nakagami - Rician fading, and one transmission and reception feed component. We were successful in receiving a 23 GHz beacon signal from ICE transponder of the COMETS and succeeded in tracking the satellite from a moving vehicle at speeds of approximately 10 ~ 20 Km/h on paved roads. In 2018, with new device AD8302, we have verified new QD system and performed a simulation, based on the past filed experiment. This new device shall be improving the tracking abilities from mobile body on the earth to the multimedia satellite.

• 한국산학기술학회논문지
• /
• 제13권2호
• /
• pp.790-794
• /
• 2012

소출력 무선설비로부터 발사되는 전파로 인한 혼신으로부터 다른 무선국을 보호하기 위해 사용 주파수에 따라 출력 강도를 제한하고 있으며, 수신기의 경우에는 불요 발사 전력을 규제하고 있는데, 국내의 경우에는 1GHz이하의 소출력 무선설비의 수신기의 부차적인 전파 전력에 관한 규정은 -54dBm으로 규정되어, 1GHz 이상의 소출력 무선설비의 경우에는 아직 그 규정이 마련되어 있지 않고 있다. 현재 1GHz 이상의 기기들이 통신시장의 확대로 인해 서비스가 증가하고 있어 국내 기준이 필요 상태이다.

• 한국정보통신학회논문지
• /
• 제14권1호
• /
• pp.9-15
• /
• 2010

본 논문에서는 135kHz 이하 미약 무선국의 전계 강도(기술 기준)에 대한 현재 각국의 동향과 그 기준치를 분석 및 비교를 통하여 해당 대역의 국내기준의 문제점을 분석하였다. 전자파 적합 등록에서 제시하고 있는 각국의 전계 강도 기준치와 연계하여 이에 적합한 국내의 비허가 무선기기(미약 무선기기)의 실질적인 도입 가능한 전계 강도의 기준치를 제시함을 목적으로 한다. 본 논문에서 제시한 전계 강도 허용치를 바탕으로 국내 기준을 상향하면 미약 무선기기 의 보급과 발전에 기여할 것으로 예상되며 국내 통신 시장은 물론 국제 통신 시장에서 경쟁력을 갖출 수 있을 것으로 예상된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.854-859
• /
• 2008

This study describes the aging behavior of soils and its mechanism, which have been reported in the literatures mainly by Mitchell(1986) and Schmertmann(1991). It could be known that aging of soils has both positive and negative effects on mechanical properties of soils. In order to show aging effects on dam behavior, a parametric study was carried out based considering the presence of a weak area within clay core zone of the fill dam. From the comparison of results obtained from numerical analysis and filed investigation, age-softening phenomena occurred within core zone during about 30 years after its completion.

• International Journal of Computer Science & Network Security
• /
• 제24권6호
• /
• pp.141-152
• /
• 2024

Cyber security plays an important role in the field of IT industry and other industry too. Whenever we talk about cyber security, the word cybercrime pops out. Cybercrime is the biggest issues we are facing right now. Every 39 seconds an attacker is hacking something. Since 2008 to 2019 there are more than 8800 data breach cases is being found or filed. Even as we are aware of cybercrime and its stats, only 5% organization are fully secured and other 95% are not fully secured. According to survey 56% organization have weak controls. Basically they are not secured. Apart from taking measures cyber security are facing huge challenges or disturbs to many. This paper mainly focuses on dare to cyber security and also center of attraction is cyber security expertise, morals with changing in technology with time. [1]

• 한국정보통신학회논문지
• /
• 제13권12호
• /
• pp.2498-2504
• /
• 2009

본 논문에서는 8.2MHz 대역의 국내 미약 전계 강도 무선기기의 출력 제한치를 다른 외국의 기준치와 비교하였다. 이를 통해 국내의 규정이 미국이나 유럽에 비해 낮음을 대략 10-20dB 정도 낮음을 확인하였고, 이를 검증하기 위해 8.2MHz EAS 시스템의 출력을 측정하였다. 측정 결과, 전계 강도값이 각각 $70.6dB{\mu}V/m$와 $68.3dB{\mu}V/m$로 측정되었는데, 이러한 값은 국내의 현재기준인 $59.8dB{\mu}V/m$를 초과하는 값임을 확인하였다. 따라서 8.2MHz 대역의 국내기준의 사향 검토가 필요하다 사료된다.

• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2319-2325
• /
• 2009

본 논문에서는 58kHz 대역의 국내 미약 전계 강도 무선기기의 출력 제한치를 다른 외국의 기준치와 비교하였다. 이를 통해 국내의 규정이 미국이나 유럽에 비해 대략 50dB 정도 낮음을 확인하였고, 이를 검증하기 위해 58kHz EAS 시스템의 출력을 측정하였다. 측정 결과, 전계강도값이 각각 $112dB{\mu}V/m$와 $108dB{\mu}V/m$로 측정되었는데, 이러한 값은 국내의 현재 기준인 $102.7dB{\mu}V/m$를 초과하는 값임을 확인하였다. 따라서 58kHz 대역의 국내기준의 사양 검토가 필요하다고 사료된다.

• 대한후두음성언어의학회지
• /
• 제25권2호
• /
• pp.96-98
• /
• 2014

Injection laryngoplasty is simple and useful procedure in patient with vocal cord paralysis even under local anesthesia. For approaching vocal cord level, flexibility of neck mobility is required to operate injection laryngoplasty but it is relatively difficult to approach vocal cord in patient who has cervical fixations. Laryngeal mask airway (LMA) can be helpful:We use a LMA (I-gel$^{TM}$) during intubation without neck extension on flat supine position under general anesthesia and have a good operation filed. LMA with swivel connector give surgeons better surgical vision and make insertion of fibroscope easily during operation. Hyaluronic acid injection was done use needle (25 G, 5 cm) via percutaneous cricothyroid space : This procedure can be useful method for patients who suffer from not only weak voice but also dysphagia and aspiration high vagal palsy patient after spine surgery or uncooperative with awake injection laryngoplasty.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권1호
• /
• pp.63-91
• /
• 2006

According to the rapid development of science technologies, a life and development cycle of products are getting shorter and structures and functions become more complex so that the reliability requirement of customers is getting greater for components in the products. However, most domestic mechanical components are manufactured by small and medium-sized companies, who are manufacturing in poor economic and technical condition. Because of this, assessment technologies and equipment to predict and guarantee the reliability are very weak. For this reason, it is the fact that many customers neglect the domestic mechanical components which fail to win the reliability. Korean government has been trying to eliminate the problem by establishing 18 reliability assessment centers in 2000 and performing R-Mark certification promotion and constructions of the foundation for reliability assessment to rebuild the reliability on the domestic components and materials. Korea Institute of Machinery and Materials has been designated as a supervising organization for reliability assessment in the machinery filed for 5 years. In this paper, we would like to introduce effective and systematized 12 steps of reliability substantiation test on mechanical components with know-how we achieved during the period.

• Geomechanics and Engineering
• /
• 제10권6호
• /
• pp.757-774
• /
• 2016

Soils are usually weak in tension therefore different materials such as geosynthetics are used to address this inadequacy. Worldwide annual consumption of geosynthetics is close to $1000million\;m^2$, and the value of these materials is probably close to US$1500 million. Since the total cost of the construction is at least four or five times the cost of the geosynthetic itself, the impact of these materials on civil engineering construction is very large indeed. Nevertheless, there are several significant problems associated with geosynthetics, such as creep, low modulus of elasticity, and susceptibility to aggressive environment. Carbon fiber reinforced polymer (CFRP) was introduced over two decades ago in the field of structural engineering that can also be used in geotechnical engineering. CFRP has all the benefits associated with geosynthetics and it boasts higher strength, higher modulus, no significant creep and reliability in aggressive environments. In this paper, the performance of a CFRP reinforced retaining wall is investigated using the finite element method. Since the characterization of behavior of soils and interfaces are vital for reliable prediction from the numerical model, soil and interface properties are obtained from comprehensive laboratory tests. Based on the laboratory results for CFRP, backfill soil, and interface data, the finite element model is used to study the behavior of a CFRP reinforced wall. The finite element model was verified based on the results of filed measurements for a reference wall. Then the reference wall simulated by CFRP reinforcements and the results. The results of this investigations showed that the safety factor of CFRP reinforced wall is more and its deformations is less than those for a retaining wall reinforced with ordinary geosynthetics while their construction costs are in similar range.