• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.603-605
• /
• 2006

To reduce inference of any power delivery failures in underground power cable, power system operators are trying to find effective way of finding fault location as soon as possible. But it is very difficult to find fault location exactly for underground power cable. We are developing fault location system for underground power cable which can detect its fault location exactly. This new system monitors current and voltage of underground power cable by using low voltage and current sensors and if there are any accidents, it records its transient signal. Fault location is calculated by analyzing recorded signal. To develop fault location system for power cable, we needed fault simulation system and we installed it physically and tested. In this rapers, we describe on describe of fault location system for underground power cable.

• 한국입자에어로졸학회지
• /
• 제5권1호
• /
• pp.9-16
• /
• 2009

Pressure drop and particle removal efficiency of two commercial fibrous medium filters were measured with 20~1,000 nm sized aerosolized KCl particles. Pressure drop and particle removal efficiency were also theoretically predicted and the results qualitatively agreed with the experimental data. For this given particle removal efficiency, a filter design method for obtaining minimum pressure drop (and therefore minimum fan power) was suggested in this study by selecting solidity and fiber diameter as parameters. Therefore, by carrying out theoretical and experimental approaches together, this paper introduced a way of finding conditions for low pressure drop and high performance of a fibrous filter, especially if the filter would be used in mechanical ventilation system.

• 전자공학회논문지A
• /
• 제32A권5호
• /
• pp.71-80
• /
• 1995

The usual approach for desinging a fast multiplier involves finding a way to quickly add up all the partial products, based on parital product recoding scheme and carry-save addition. This paper describes theoretical medels for area and time complexities of Multibit Reconding Paralle Multiplier (MRPM), which is a generalization of the modified Booth recoding scheme. Based on the proposed models, time performance, hardware requirements and area-time efficiency are analyzed in order to determine optimal recoding size for very large scale integration (VLSI) realization of the MRPM. Some simulation results show that the MRPM with large multiplier and multiplicand size has optimal area-time efficiency at the recoding size of 4-bit.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제16권1호
• /
• pp.35-42
• /
• 2010

As a functionally complicated facility, it requires rational strategy to accommodate multi-functional needs to plan a hospital. Ambulatory surgery units located in large hospitals have problems such as longer waiting time and congestion for patients due to complicated planning and organization within limited area, which raise needs for independent ambulatory surgery centers to enable smoother medical treatment for patients. To design an independent ambulatory surgery center, understanding of zoning and layout of each unit needs is particularly required. This study focuses on research of efficient zoning/organization of day surgery unit and circulation arrangements of ambulatory surgery centers by analyzing various examples abroad, which will eventually help finding appropriate way of planning domestic ambulatory surgery centers. Specific area of research includes ambulatory surgery process, programmatic requirements, spatial organization of the facility, layout of surgery unit and circulation arrangements of ambulatory surgery centers.

• 한국소음진동공학회논문집
• /
• 제13권1호
• /
• pp.33-39
• /
• 2003

Interior parts of a vehicle are getting important to reduce interior noise. Therefore, prior analysis of cabin noise related with interior parts are necessary at first design stage. Recently, Statistical Energy Analysis(SEA) has been suggested as a possible way for high frequency range noise analysis of interior parts. The validity of noise analysis with SEA to interior parts has been preyed by comparing with experimental result, and the developed method with SEA has been applied in finding optimized interior parts package.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.88-90
• /
• 2009

Extremely-Low-Frequency(ELF) magnetic fields are generated around power cables and bus bars in power systems. Such the stray fields may cause disturbances to nearby electronic apparatus and affect even human health. In order to seeking out a proper way to reducing the fields, the first thing to do is to accurately predict field distribution around analysis models of interest. Then, optimization techniques should be applied for finding a more improved design than the initial one. To achieve this goal, commercial electromagnetic software, MagNet, is combined with evolution strategy algorithm. For verification of the proposed method, three-phase power line cables and busbar systems have been tested.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.936-941
• /
• 2005

Apartment building floor with a damping layer can be modeled as a sandwich plate. In order to reduce low frequency noise more efficiently due to heavy impact on such a floor, thickness of the damping layer needs to be optimized at the design stage. Modal loss factors are determined in this paper by RKU equation which is popular In sandwich plate theories. Optimum damping layer thickness determined at each mode is weighted so that several modes in the frequency range of interest can be included in a more systematic way. Furthermore, to reflect frequency-dependent characteristics of complex stiffness of the damping layer, an iteration method is proposed in finding modal frequencies.

• International Journal of Computer Science & Network Security
• /
• 제21권12호
• /
• pp.165-174
• /
• 2021

This study aimed to ascertain whether electronic courses at the deanship of electronic learning and distance education at Umm Al-Qura University meet the quality standards developed by the Quality Matters (QM) organization. This endeavor adopted a mixed method of an explanatory sequential research design for an in-depth understanding of the topic under scrutiny. The sample of the study consisted of ten courses designed at the deanship and reviewed using an evaluation form. The results showed that the courses in focus did not meet the criteria of QM. Based on this finding, a semi-structured interview was designed to collect relevant data from the syllabus designers at the deanship. The interviews yielded information on the difficulties the course designers faced when designing QM-criteria-based courses. The results obtained from the interviews showed that the designers experienced administrative, technical, and faculty-member-related challenges that, when producing online courses, intercepted their way to achieving the QM standards. The study closed with some recommendations, the most important of which is a call for re-developing online courses in alignment with the well-recognized QM standards.

• Nonlinear Functional Analysis and Applications
• /
• 제26권3호
• /
• pp.451-474
• /
• 2021

In this paper, we investigate a hybrid algorithm for finding zeros of the sum of maximal monotone operators and Lipschitz continuous monotone operators which is also a common fixed point problem for finite family of relatively quasi-nonexpansive mappings and split feasibility problem in uniformly convex real Banach spaces which are also uniformly smooth. The iterative algorithm employed in this paper is design in such a way that it does not require prior knowledge of operator norm. We prove a strong convergence result for approximating the solutions of the aforementioned problems and give applications of our main result to minimization problem and convexly constrained linear inverse problem.

• 디자인학연구
• /
• 제15권3호
• /
• pp.271-280
• /
• 2002

최근 정보기술과 인터넷은 눈부신 발전을 해오고 있다. 이렇게 변화하는 환경 속에서 기존의 오프라인 관점에 근거한 전략이나 마케팅은 더 이상 기업경쟁력 향상의 역할을 수행하기가 어렵게 되어가고 있으며, 기업과 고객 사이에서의 디지털 네트워킹으로 인한 고객들에 대한 정보관리 및 마케팅실행방법 등에 있어서 많은 변화를 가져오고 있다. 이러한 발전과 변화는 디자인 연구 방법론 에 있어서도 많은 변화를 유도하고 있다. 따라서 디자인적인 측면과 사회·환경적인 측면을 고려하여 본 연구는 Bloch(1995)가 주장한 제품디자인에 대한 소비자반응 프레임웍 즉, 선호정도-디자인이미지형용사-디자인요소들간의 명확한 인과관계모형을 구축한 후, IT기반 인터렉션부분인 eCRM을 결합하여 디자인 개발에 적용할 수 있는 실시간 디자인 정보 추출 솔루션을 구축하였다. 이를 통해 소비자들이 어떤 이미지를 제공하는 제품디자인을 선호하며 선호하는 제품디자인이 제공하는 이미지는 어떤 디자인요소들로 구성되는지에 대한 인과관계를 규명하여 디자이너들이 좀더 객관적이고 신뢰 할 수 있는 디자인요소들을 선택하여 디자인할 수 있는 지침을 온라인 상에서 실시간에 제공받을 수 있다.