Kim, Kwan-Su;Song, Yeon-Sang;Moon, Youn-Ho;Park, Si-Hyung
KOREAN JOURNAL OF CROP SCIENCE
/
v.51
no.spc1
/
pp.297-303
/
2006
Cuticular waxes on tea (Camellia sinensis L.) loaves consisted mainly of alkanes, fatty acids, primary alcohols, triterpenes, and a group of unknown compounds, dominated by primary alcohols and triterpenes. Tea tree accessions used in this study were M-1, M-2, Sakimidori, and Yabukita. For all accessions, the alkane, fatty acid, and primary alcohol constituents consisted of a homologues series, and the major constituents of primary alcohol class were the C28 and C30 homologues. Triterpenes consisted of friedelin, $\beta-amyrin$, and three unidentified ones and friedelin was the most abundant. Leaf area and the total amounts of cuticular waxes per leaf increased with lower leaf position from the apical bud in Yabukita variety. With different leaf position, total wax amount per unit leaf area on the youngest leaves of P1 (the uppermost leaf position) showed the largest amount $(12.80{\mu}g/cm^2)$, and on mature loaves of P2 to P6 ranged from 7.08 to $7.77{\mu}g/cm^2$, and then on the oldest loaves of P7 (the lowest leaf position) remained at an increased level $(17.53{\mu}g/cm^2)$. During leaf development (lower leaf position), the amount of primary alcohols decreased from P1 to P6 and increased at P7, whereas that of triterpenes increased from P1 to P7. The percentage of each wax class in the total wax amount occurred a decrease in primary alcohol and an increase in triterpene, with leaf age.
Leaf surface structures were investigated in the Chinese juniper Juniperus chinensis by scanning electron microscopy. Adult scale leaves were collected from the tree, air-dried at room temperature, and sputter-coated with gold without further specimen preparation. Approximately fi ve stomata were locally distributed and arranged in clusters on the leaf surface. Stomata were ovoid and ca. 40 ${\mu}m$ long. The epicuticular wax structures of J. chinensis leaves were tubules and platelets. Numerous tubules were evident on the leaf regions where stomata were found. The tubules were cylindrical, straight, and ca. 1 ${\mu}m$ in length. They almost clothed the stomatal guard cells, and occluded the slit-shaped stomatal apertures. Moreover, the wax ridges were flat crystalloids that were connected to the surface by their narrow side. They did not have distinct edges, and their width/height ratio varied. In particular, the wax ridges could be discerned on the leaf regions where stomata were not present nearby. Since the wax ridges did not have distinct edges on their margin, they were identified as platelets. Instances were noted where platelets were oriented either parallel to each other or perpendicular to the cuticle surface. These results can be used in biomimetics to design the hierarchical structures for mimicking the plant innate properties such as hydrophobicity and self-cleaning effects of the leaf surface.
The symbol of the sacred tree represents the world tree. They were influenced by Tree worship in Northern mounted nomadic groups, and the first is quite obvious, that the sacred tree is a palm tree. The Assyrian sacred tree possesses characteristics, making the tree iconographic and rather artificial. The tree typically has a thin trunk arranged in two or three tiers. Each tier is separated by horizontal plates or bands. The top of the tree is crowned with a palmette form. Wavy streamers emanate from the tree abd terminate in palmettes in a criss cross fashion. The central trunk is topped with a palmette and surrounded the trunk with palmettes emphasizing a link to date trees. The number of branches on the tree is limited, and there are usually seven, fifteen or thirty branches. The connection of these numbers with those of the week, and of the lunar wax and wane is so obvious. The branches on the tree may have indeed represented a calender of some sort. Mainly based on the excavated tomb articles of the three kingdoms and referred to Chinese and Japanese ones, Sacred Tree pattern showed that was lightly influenced by the times and area, but was slowly changed and developed to different types through those each ages generally. The Sacred Tree type was three part in according to the wavy streamers emanate from the tree abd, Sacred tree type I, Sacred tree type II, Sacred tree type III[the Mountain(; 山)-typed piled up Sacred Tree].
Park, Sang-Mi;Nam, Da-Hyun;Kim, Ji-Hyung;Jo, Geon-Young;Kim, Ha-Yang;Kim, Jeongbae
Journal of the Korean Solar Energy Society
/
v.36
no.2
/
pp.1-7
/
2016
This study was experimentally performed to analyze the growth characteristics of a plant(wax tree or privet) using the surface temperature measured from thermal images captured using a thermal camera with water and cider. To do that, this study measured every each 12 hours the surface temperature and the stem temperature of leaves attached to the plant sample until the plants wilt on summer season in the laboratory room. From the experimental results, this study revealed that the temperature of front and back of the leaves is a little different due to the pore. The mean surface temperature of a leaf in cider is $0.52^{\circ}C$ higher than that of a leaf in water. The phenomena that the leaves of plants fall could be also demonstrated using the surface temperature. Before a leaf is falling from the tree, the temperature of the stem is lowered about $2^{\circ}C$ than those of other parts in a leaf. This result can be validated from previous result performed in University of Wisconsin.
This study was carried out to examine the effect of manufacturing factors on physical properties of hardboard (S.I.S) made from the juvenile wood of sycamore (Platanus orientalis L.) The results obtained may be summarized as follows: 1. The difference among the yields of pulp treated with preheat time (defibrate condition) was significant in those of treatments. There was no difference in the yield of pulp treated with defibrate time. The yields of pulp on the tree age classes were shown the difference by 2<4<6<8 years. 2. The specific gravities of hardboard that were treated with hot pressing conditions showed us significantly in those of treatments. There was no difference on the specific gravities among hardboards, treated with resin and wax contents. But in all cases of the specific gravities satisfied the standard which specified the KS F 3203 (Hardboard) 3. The moisture contents of hardboard satisfied the standard which calls for 13-percent below. There were difference in moisture contents between hardboard, treated with preheating time, resin and wax contents and hot pressing conditions. And the moisture contents of hardboard on the tree age classes showed the difference by 2<4<6<8 years. 4. The water absorption and thickness swelling of hardboard treated with defibrations, resin and wax contents, and hot pressing conditions were significant in those of treatments. And the water absorption and thickness swelling of hardboard on the tree age classes showed us the significant difference by 8<6<4<2 years. 5. The difference among the flexural strength in using tested three conditions showed us the difference by defibration$200kg/cm^2$) of hardboard, it is likely to be recommened that the juvenile wood of sycamore is valuable for the raw materials of hardboards.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.32
no.1
/
pp.25-32
/
2022
Investment casting is a production method commonly used to manufacture precision equipment, medical fields, and accessories, and has continued to develop through the modernization of equipment and high quality of materials, and its scope of use has been expanded. The purpose of this study is to minimize the defect rate by deriving structural improvement and standardization of mold temperature, which are key elements of the investment casting process, to minimize the defect rate. The scope of the study is limited to jewelry manufacturing casting processes suitable for understanding the structure and principles of small gate, and an experimental research is to be conducted by using soft Wax, gypsum powder, and 14 K gold as research materials. According to the results, the most appropriate casting standard temperature for the casting pattern of Alloy 14 k was the lowest turbulence at 980℃ flask temperature of 550℃, so good products could be produced. As a future task of this study, detailed studies are needed to data the structure and system temperature of small gate, reduce production defects in the field, and provide data for excellent investment casting competitiveness.
The study investigates the correlation between the seasonal changes in the absorption of fine dusts and the fine structure of surface on each type of street tree, such as Quercus myrsinifolia, Quercus glauca, Quercus salicina, Camellia japonica, and Prunus × yedoensis in the southernareas of Korea. The absorption ranges of fine dust were 31.51~110.44 ㎍/cm2 in January, 23.20~79.30 ㎍/cm2 in November, 22.68~76.90 ㎍/cm2 in May, and 9.88~49.91 ㎍/cm2 in August. The absorption value was about 54.4% higher in January than in May. With the grooves and hairs on the leaf surface and lots of wax, Q. salicina seems related to the high absorption rate of fine dust for each fine dust particle size. The one with gloss and smooth leaf surface has a low amount of wax. C. japonica Prunus × yedoensisshowed a low absorption rate of fine dust in each season. Whereas the increase in porosity density, length, and leaf area size can be related to the reduced PM and increasedabsorption rate, the leaf surface roughness, total wax amount, and porosity width can be related to the increase in the PM absorption rate. There was also a high correlation between the total wax amount and absorption rate of the leaf surface at the size of PM0.2 than PM10 and PM2.5. These results imply that the quantitative and qualitative trais of leaf, such as wax amounts and leaf surface,can increase the absorption of fine dusts, and the small-sized particles seem to be highly adsorbed with the high wax amounts.
This paper has made a close examination of Shingan Goohwang Chowalyo(1660), Cheesaeng yoram(1691), Sallim Gyungjae(1715) and Imwon simyook Jee(1827), to grasp what kinds of famine relief foods have been analyzed in terms of nutrition elements and cooking methods. And also this paper has surveyed the changes of these famine relief foods according to the times. Three hundred forty one famine relief foods are recorded in the above mentioned books, Among them, ten foods are recorded in common in these four books: pine needles, elm tree skin, soybeans, wax, jujubes, black beans, glutinous millet, turnip seeds white pine-mushroons and Chool-Atractylodes japonica. The methods of cooking and processing are most varied in the order of pine needles, black beans and elm tree skin, Pine needles are rich in protein and fat, and so may be regarded as the first of famine relief foods. Elm tree skin is of more than 50% carbohydrate and may be used in plate of cereals. I addition to these, Hwangui-milk vetch, Choonsu-cedrela Sinensis, Tacksa-Alisma Orientale Juzep and some other foods contain starch, glucose, fatty acids, and amino acids. So they may be used for replacing cereals and relieving famine. Before these famine relief foods are cooked or processed, according to their ingredients they should be soaked in water for a time in some cases the water should be changed several times. In Shingan Goohwang Chowalyo and Cheesaeng Yoram, measuring units are rarely recorded, while in sallim Gyungjae, they are explicitly shown. Imwon Simyook Jee clearly shows the use of oriental medicine materials. And the fur above mentioned books show no record of famine relief animal foods. To these days, vegetables have been boiled, squeezed and seasoned with salt and oil, but the better the economic conditions become, the less other famine relief foods are used. Nevertheless it is expected that these natural foods can be made favorite dishes with the best use of their good flavors and tastes.
The authors studied on the bionomics of the Florida wax scale, Ceroplastes floridensis Comstock and bionomics of two kind of parasites which attack on this Florida wax scale in 1963 to 1964. 1. Ceroplastes floridensis Comstock was heavily infested on the persimmon tree planted in the southern part of Korea, specially at the center of Taegu city. Parasitic ratio of important parasite of Ceroplastes floridensis Comstock, Microterys clauseni was $66.67\%$ and appeared low parasited ratio at the center of the city. 2. The developed eggs of the Ceroplastes floridensis Comstock was appear며 from mid-May to early July. The peak of it was late-May to early June. Average stored eggs inside of a body is 2030. $2030.77\pm0.49.$. 3. The hatching period of the Ceroplastes floridensis Comstock begins from early June to early July. Mid-June was the peak period of it. Pupation period of the male was August 14 to September 7 and adult was emerged on August 20 to September 8. Mean longevity for adult male was 3 days in August but 4 days in September. 4. On the differences of the body- length parasited on the three host plants, persimmon, platanus, and trifoliate orange, the body length parasited on the persimmon was the largest, medium on platanus and the smallest on the trifoliate orange. 5. Microterys clauseni H. Compere parasite on tile Ceroplastes floridensis Comstock with 5 generations in a year. Hibernate in the body of the host as tan·at stage. The first adult appears in middle April. Fifteen days was required for one generation in $21^{\circ}$. The authors observed on the form ovary, female with 6 ovarioles, and mean number of eggs per female was $47.19\pm0.55$. 6. On the parasited individuals of the Microterys clauseni H. Compere a larva was the most numerous and was found 2 individuals or 4 individuals parasite on the one Ceroplastes floridensis Comstock. 7. Coccophagus app. parasited on the only male body of the Ceroplastes floridensis Comstock. The parasitic ratio was $14.831\%$ on persimmon tree in Taegu city.
Kwon, Seon-Ju;Cha, Seung-Ju;Lee, Joo-Kyung;Park, Jin Hee
Journal of Applied Biological Chemistry
/
v.63
no.2
/
pp.161-168
/
2020
It is known that different plant species have ability to deposit different amounts of particulate matter (PM) on their leaves and plants can absorb heavy metals in PM through their leaves. Heavy metals in PM can have toxic effect on human body and plants. Therefore, PM on different roadside trees at Chungbuk national University including box tree (Buxus koreana), yew (Taxus cuspidate), royal azalea (Rhododendron yedoense), and retusa fringetree (Chionanthus retusa) was quantified based on particle size (PM>10 and PM2.5-10). The metal concentration in PM accumulated on leaves was analyzed using inductively coupled plasma-mass spectroscopy. In this study, the mass of PM>10 deposited on the surface of the tree leaves ranged from 6.11 to 32.7 ㎍/㎠, while the mass of PM2.5-10 ranged from 0 to 14.8 ㎍/㎠. The royal azaleas with grooves and hair on the leaf surface retained PM particles for longer time, while the yews and box trees with wax on leaf surfaces accumulated more PM. The PM contained elements in crustal material such as Al, Ca, Mg, and Fe and heavy metals including Cu, Pb and Zn. The concentration of elements in crustal material was higher in the coarser size, while heavy metal concentration was relatively higher in the finer size fraction. The Mn, Cd, Cu, Ni, Pb, and Zn concentrations of leaves and PM2.5-10 were significantly correlated indicating that PM was taken up through tree leaves.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.