• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.297-303
• /
• 2006

Cuticular waxes on tea (Camellia sinensis L.) loaves consisted mainly of alkanes, fatty acids, primary alcohols, triterpenes, and a group of unknown compounds, dominated by primary alcohols and triterpenes. Tea tree accessions used in this study were M-1, M-2, Sakimidori, and Yabukita. For all accessions, the alkane, fatty acid, and primary alcohol constituents consisted of a homologues series, and the major constituents of primary alcohol class were the C28 and C30 homologues. Triterpenes consisted of friedelin, $\beta-amyrin$, and three unidentified ones and friedelin was the most abundant. Leaf area and the total amounts of cuticular waxes per leaf increased with lower leaf position from the apical bud in Yabukita variety. With different leaf position, total wax amount per unit leaf area on the youngest leaves of P1 (the uppermost leaf position) showed the largest amount $(12.80{\mu}g/cm^2)$, and on mature loaves of P2 to P6 ranged from 7.08 to $7.77{\mu}g/cm^2$, and then on the oldest loaves of P7 (the lowest leaf position) remained at an increased level $(17.53{\mu}g/cm^2)$. During leaf development (lower leaf position), the amount of primary alcohols decreased from P1 to P6 and increased at P7, whereas that of triterpenes increased from P1 to P7. The percentage of each wax class in the total wax amount occurred a decrease in primary alcohol and an increase in triterpene, with leaf age.

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.124-128
• /
• 2012

Leaf surface structures were investigated in the Chinese juniper Juniperus chinensis by scanning electron microscopy. Adult scale leaves were collected from the tree, air-dried at room temperature, and sputter-coated with gold without further specimen preparation. Approximately fi ve stomata were locally distributed and arranged in clusters on the leaf surface. Stomata were ovoid and ca. 40 ${\mu}m$ long. The epicuticular wax structures of J. chinensis leaves were tubules and platelets. Numerous tubules were evident on the leaf regions where stomata were found. The tubules were cylindrical, straight, and ca. 1 ${\mu}m$ in length. They almost clothed the stomatal guard cells, and occluded the slit-shaped stomatal apertures. Moreover, the wax ridges were flat crystalloids that were connected to the surface by their narrow side. They did not have distinct edges, and their width/height ratio varied. In particular, the wax ridges could be discerned on the leaf regions where stomata were not present nearby. Since the wax ridges did not have distinct edges on their margin, they were identified as platelets. Instances were noted where platelets were oriented either parallel to each other or perpendicular to the cuticle surface. These results can be used in biomimetics to design the hierarchical structures for mimicking the plant innate properties such as hydrophobicity and self-cleaning effects of the leaf surface.

• Journal of Fashion Business
• /
• v.5 no.3
• /
• pp.63-71
• /
• 2001

The symbol of the sacred tree represents the world tree. They were influenced by Tree worship in Northern mounted nomadic groups, and the first is quite obvious, that the sacred tree is a palm tree. The Assyrian sacred tree possesses characteristics, making the tree iconographic and rather artificial. The tree typically has a thin trunk arranged in two or three tiers. Each tier is separated by horizontal plates or bands. The top of the tree is crowned with a palmette form. Wavy streamers emanate from the tree abd terminate in palmettes in a criss cross fashion. The central trunk is topped with a palmette and surrounded the trunk with palmettes emphasizing a link to date trees. The number of branches on the tree is limited, and there are usually seven, fifteen or thirty branches. The connection of these numbers with those of the week, and of the lunar wax and wane is so obvious. The branches on the tree may have indeed represented a calender of some sort. Mainly based on the excavated tomb articles of the three kingdoms and referred to Chinese and Japanese ones, Sacred Tree pattern showed that was lightly influenced by the times and area, but was slowly changed and developed to different types through those each ages generally. The Sacred Tree type was three part in according to the wavy streamers emanate from the tree abd, Sacred tree type I, Sacred tree type II, Sacred tree type III[the Mountain(; 山)-typed piled up Sacred Tree].

• Journal of the Korean Solar Energy Society
• /
• v.36 no.2
• /
• pp.1-7
• /
• 2016

This study was experimentally performed to analyze the growth characteristics of a plant(wax tree or privet) using the surface temperature measured from thermal images captured using a thermal camera with water and cider. To do that, this study measured every each 12 hours the surface temperature and the stem temperature of leaves attached to the plant sample until the plants wilt on summer season in the laboratory room. From the experimental results, this study revealed that the temperature of front and back of the leaves is a little different due to the pore. The mean surface temperature of a leaf in cider is $0.52^{\circ}C$ higher than that of a leaf in water. The phenomena that the leaves of plants fall could be also demonstrated using the surface temperature. Before a leaf is falling from the tree, the temperature of the stem is lowered about $2^{\circ}C$ than those of other parts in a leaf. This result can be validated from previous result performed in University of Wisconsin.

• Journal of Korean Society of Forest Science
• /
• v.26 no.1
• /
• pp.57-65
• /
• 1975

This study was carried out to examine the effect of manufacturing factors on physical properties of hardboard (S.I.S) made from the juvenile wood of sycamore (Platanus orientalis L.) The results obtained may be summarized as follows: 1. The difference among the yields of pulp treated with preheat time (defibrate condition) was significant in those of treatments. There was no difference in the yield of pulp treated with defibrate time. The yields of pulp on the tree age classes were shown the difference by 2<4<6<8 years. 2. The specific gravities of hardboard that were treated with hot pressing conditions showed us significantly in those of treatments. There was no difference on the specific gravities among hardboards, treated with resin and wax contents. But in all cases of the specific gravities satisfied the standard which specified the KS F 3203 (Hardboard) 3. The moisture contents of hardboard satisfied the standard which calls for 13-percent below. There were difference in moisture contents between hardboard, treated with preheating time, resin and wax contents and hot pressing conditions. And the moisture contents of hardboard on the tree age classes showed the difference by 2<4<6<8 years. 4. The water absorption and thickness swelling of hardboard treated with defibrations, resin and wax contents, and hot pressing conditions were significant in those of treatments. And the water absorption and thickness swelling of hardboard on the tree age classes showed us the significant difference by 8<6<4<2 years. 5. The difference among the flexural strength in using tested three conditions showed us the difference by defibration$200kg/cm^2$) of hardboard, it is likely to be recommened that the juvenile wood of sycamore is valuable for the raw materials of hardboards.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.1
• /
• pp.25-32
• /
• 2022

Investment casting is a production method commonly used to manufacture precision equipment, medical fields, and accessories, and has continued to develop through the modernization of equipment and high quality of materials, and its scope of use has been expanded. The purpose of this study is to minimize the defect rate by deriving structural improvement and standardization of mold temperature, which are key elements of the investment casting process, to minimize the defect rate. The scope of the study is limited to jewelry manufacturing casting processes suitable for understanding the structure and principles of small gate, and an experimental research is to be conducted by using soft Wax, gypsum powder, and 14 K gold as research materials. According to the results, the most appropriate casting standard temperature for the casting pattern of Alloy 14 k was the lowest turbulence at 980℃ flask temperature of 550℃, so good products could be produced. As a future task of this study, detailed studies are needed to data the structure and system temperature of small gate, reduce production defects in the field, and provide data for excellent investment casting competitiveness.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.129-140
• /
• 2021

The study investigates the correlation between the seasonal changes in the absorption of fine dusts and the fine structure of surface on each type of street tree, such as Quercus myrsinifolia, Quercus glauca, Quercus salicina, Camellia japonica, and Prunus × yedoensis in the southernareas of Korea. The absorption ranges of fine dust were 31.51~110.44 ㎍/cm² in January, 23.20~79.30 ㎍/cm² in November, 22.68~76.90 ㎍/cm² in May, and 9.88~49.91 ㎍/cm² in August. The absorption value was about 54.4% higher in January than in May. With the grooves and hairs on the leaf surface and lots of wax, Q. salicina seems related to the high absorption rate of fine dust for each fine dust particle size. The one with gloss and smooth leaf surface has a low amount of wax. C. japonica Prunus × yedoensisshowed a low absorption rate of fine dust in each season. Whereas the increase in porosity density, length, and leaf area size can be related to the reduced PM and increasedabsorption rate, the leaf surface roughness, total wax amount, and porosity width can be related to the increase in the PM absorption rate. There was also a high correlation between the total wax amount and absorption rate of the leaf surface at the size of PM_0.2 than PM₁₀ and PM_2.5. These results imply that the quantitative and qualitative trais of leaf, such as wax amounts and leaf surface,can increase the absorption of fine dusts, and the small-sized particles seem to be highly adsorbed with the high wax amounts.

• Journal of the East Asian Society of Dietary Life
• /
• v.2 no.1
• /
• pp.35-56
• /
• 1992

This paper has made a close examination of Shingan Goohwang Chowalyo(1660), Cheesaeng yoram(1691), Sallim Gyungjae(1715) and Imwon simyook Jee(1827), to grasp what kinds of famine relief foods have been analyzed in terms of nutrition elements and cooking methods. And also this paper has surveyed the changes of these famine relief foods according to the times. Three hundred forty one famine relief foods are recorded in the above mentioned books, Among them, ten foods are recorded in common in these four books: pine needles, elm tree skin, soybeans, wax, jujubes, black beans, glutinous millet, turnip seeds white pine-mushroons and Chool-Atractylodes japonica. The methods of cooking and processing are most varied in the order of pine needles, black beans and elm tree skin, Pine needles are rich in protein and fat, and so may be regarded as the first of famine relief foods. Elm tree skin is of more than 50% carbohydrate and may be used in plate of cereals. I addition to these, Hwangui-milk vetch, Choonsu-cedrela Sinensis, Tacksa-Alisma Orientale Juzep and some other foods contain starch, glucose, fatty acids, and amino acids. So they may be used for replacing cereals and relieving famine. Before these famine relief foods are cooked or processed, according to their ingredients they should be soaked in water for a time in some cases the water should be changed several times. In Shingan Goohwang Chowalyo and Cheesaeng Yoram, measuring units are rarely recorded, while in sallim Gyungjae, they are explicitly shown. Imwon Simyook Jee clearly shows the use of oriental medicine materials. And the fur above mentioned books show no record of famine relief animal foods. To these days, vegetables have been boiled, squeezed and seasoned with salt and oil, but the better the economic conditions become, the less other famine relief foods are used. Nevertheless it is expected that these natural foods can be made favorite dishes with the best use of their good flavors and tastes.

• Korean journal of applied entomology
• /
• v.3
• /
• pp.31-39
• /
• 1964

The authors studied on the bionomics of the Florida wax scale, Ceroplastes floridensis Comstock and bionomics of two kind of parasites which attack on this Florida wax scale in 1963 to 1964. 1. Ceroplastes floridensis Comstock was heavily infested on the persimmon tree planted in the southern part of Korea, specially at the center of Taegu city. Parasitic ratio of important parasite of Ceroplastes floridensis Comstock, Microterys clauseni was $66.67\%$ and appeared low parasited ratio at the center of the city. 2. The developed eggs of the Ceroplastes floridensis Comstock was appear며 from mid-May to early July. The peak of it was late-May to early June. Average stored eggs inside of a body is 2030. $2030.77\pm0.49.$. 3. The hatching period of the Ceroplastes floridensis Comstock begins from early June to early July. Mid-June was the peak period of it. Pupation period of the male was August 14 to September 7 and adult was emerged on August 20 to September 8. Mean longevity for adult male was 3 days in August but 4 days in September. 4. On the differences of the body- length parasited on the three host plants, persimmon, platanus, and trifoliate orange, the body length parasited on the persimmon was the largest, medium on platanus and the smallest on the trifoliate orange. 5. Microterys clauseni H. Compere parasite on tile Ceroplastes floridensis Comstock with 5 generations in a year. Hibernate in the body of the host as tan·at stage. The first adult appears in middle April. Fifteen days was required for one generation in $21^{\circ}$. The authors observed on the form ovary, female with 6 ovarioles, and mean number of eggs per female was $47.19\pm0.55$. 6. On the parasited individuals of the Microterys clauseni H. Compere a larva was the most numerous and was found 2 individuals or 4 individuals parasite on the one Ceroplastes floridensis Comstock. 7. Coccophagus app. parasited on the only male body of the Ceroplastes floridensis Comstock. The parasitic ratio was $14.831\%$ on persimmon tree in Taegu city.

• Journal of Applied Biological Chemistry
• /
• v.63 no.2
• /
• pp.161-168
• /
• 2020

It is known that different plant species have ability to deposit different amounts of particulate matter (PM) on their leaves and plants can absorb heavy metals in PM through their leaves. Heavy metals in PM can have toxic effect on human body and plants. Therefore, PM on different roadside trees at Chungbuk national University including box tree (Buxus koreana), yew (Taxus cuspidate), royal azalea (Rhododendron yedoense), and retusa fringetree (Chionanthus retusa) was quantified based on particle size (PM_>10 and PM_2.5-10). The metal concentration in PM accumulated on leaves was analyzed using inductively coupled plasma-mass spectroscopy. In this study, the mass of PM_>10 deposited on the surface of the tree leaves ranged from 6.11 to 32.7 ㎍/㎠, while the mass of PM_2.5-10 ranged from 0 to 14.8 ㎍/㎠. The royal azaleas with grooves and hair on the leaf surface retained PM particles for longer time, while the yews and box trees with wax on leaf surfaces accumulated more PM. The PM contained elements in crustal material such as Al, Ca, Mg, and Fe and heavy metals including Cu, Pb and Zn. The concentration of elements in crustal material was higher in the coarser size, while heavy metal concentration was relatively higher in the finer size fraction. The Mn, Cd, Cu, Ni, Pb, and Zn concentrations of leaves and PM_2.5-10 were significantly correlated indicating that PM was taken up through tree leaves.