• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1051-1057
• /
• 2000

A traveling-wave CPW(coplanar waveguide) electrode with abruptly broken input/output-taper for LiNbO$_3$optical modulator was designed and fabricated. The electrical characteristics of traveling-wave electrode on z-cut LiNbO$_3$crystal with SiO$_2$buffer layers were measured by network analyzer. To confirm the possibility of the electro-optic modulator electrode, detailed calculations of the impedance, microwave effective index and attenuation constants are presented as a function of the microwave electrode thickness, but the buffer layer thickness is fixed as 1${\mu}{\textrm}{m}$. These characteristics are discussed from the viewpoint of the device optimization and are expected to be design guides for the LiNbO$_3$modulator’s electrodes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.39-42
• /
• 1993

In this paper, we performed theoretical simulation for directional coupler using BPM program. Simulation results shored that the optimum optical waveguide refractive index between the guides were 3$\mu\textrm{m}$. Using the parameters of n$_1$=2.25, n$_2$=2.25, n$_3$=2.2, gap=3$\mu\textrm{m}$, W= 30$\mu\textrm{m}$, $\Delta$z=0.l$\mu\textrm{m}$, λ=1.5$\mu\textrm{m}$, we decided other design parameters. When we applied 40[V] in the optimum condition of the directional coupling effect, we concluded the refractive index variation of 0.001.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.398-402
• /
• 2011

In this paper, we have proposed a principle to design wideband, low dispersion and temperature stabilized slow light structure in slotted photonic crystal waveguide (SPCW). The infiltration of the silicon photonic crystal with polymer will enhance the slow light and increase the group index, whereas the different signs of thermo-optic coefficients of polymer and silicon make the proposed structure stable on temperature variation over $60^{\circ}C$ and improves the group index-bandwidth products of the designed structure. The SPCW structure is modified to maximize the slow light effect and minimize the dependence of the group index and hence the group velocity dispersion to temperature.

• 전자공학회논문지A
• /
• 제31A권1호
• /
• pp.26-32
• /
• 1994

In this paper, using the newly developed GaAs Schottky beam-lead diode made by Marconi company, we have developed and evaluated the waveguide type single-ended mixer at Q-band. The various components of the mixer were separately designed and optimized using the Super-Compact software. These studies included the design of the step waveguide impedance transformer and the RF-choke filter, and the optimization of a high and low impedance for the RF-choke filter. Moreover, this RF-choke filter pattern included a section to reject the second harmonic frequency of the RF signal. Finally, this Q-band mixer with 1.4GHz/400MHz IF frequency exhibits an average conversion loss of 5.3 dB over 33-50GHz bandwidth.

• 대한전자공학회논문지
• /
• 제10권2호
• /
• pp.1-6
• /
• 1973

전기광 물질이 부분적으로 장하된 구형도파관을 이용한 진행파 레이저 위상 변조기에 대해 이론적으로 해석하였으며, 전파특성, 전계분포 감쇄량과 변조도를 정규화된 항으로 표시했다. 여기서 비교적 낮은 변조전력으로 큰 변조도를 얻었으며, 또한 KDP를 사용한 변조기의 설계방법을 제시했다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 추계학술발표회 논문집
• /
• pp.40-44
• /
• 1986

The cassegrain antenna, 32metor , diameter, is designed for the satellite earth station at Boun. It is fed by a beam waveguide of type. The results of measurements G/T (Gain to Noise Temperature ratio) is 40.86dB/K at the elevation elevation angle 5˚ for 4GHz. And the average transmit and receive gain are 64.62dB and 61.3dB, respectively. They satisfy the values designed for the antenna. The sidelobe levels of the pattern also are in good accord with the recommendation of C.C.I.R.

• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.1-9
• /
• 1995

The structures of inductive irises are used commonly in waveguide filter, especially at highter frequencyies, due to low loss and high temperature stability. However, the iris thickness can not be neglected, as it could be at the lower frequencies. Approximate models assuming zero thickness fail to predict the exact behavior of the filter. And current thickness correction is introduced which is valid in the case of thick irises only. Account of the effect of round is normally not taken. So the necessity of finding a relation for the two factors-iris thickness and round-arises in the design of waveguide filters. This paper describes a mutual relation that considers the combined effect of finite thickness and round from the start. In order to test the validity of the changed relation, weveral examples are given. And the measured response of each case is then compared with the predicted reponse. And it is shown that the radius is of perceptible influence on the transmission coefficient through a thick iris.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.180-187
• /
• 2016

The independent operation of a color filter for incident polarization is demonstrated using a guided-mode resonance (GMR) filter employing a metal-insulator-metal (MIM) waveguide. To achieve independent operation, a rectangular MIM grating is proposed as a wave-guide resonator. The design considerations are discussed and include how to determine the grating period and slit width. Power flow distribution is observed with slit width variation. Blue-green, green-red, and blue-red filters for corresponding x- and y-polarizations are demonstrated as application examples with numerical simulation with rectangle-shaped MIM grating. As a practical application, feasibility as a chromatic polarizer is discussed.

• 한국통신학회논문지
• /
• 제11권5호
• /
• pp.307-314
• /
• 1986

수치해석법을 이용하여 환상 유전체를 포함하는 원형 도파관에서 유전체폭을 일정하게 변화시켰을 때의 Tmon 및 Teon 모드에 대한 전파상수를 구하였다. 이러한 구조는 유전체 공진기의 Q값을 개선하기 위한 supporter로 사용할 수 있고, 계산결과는 slow wave structure의 설계에 이용할 수 있다. 또한 본 논문에서의 수치해석 방법은 유전체 공진기의 공진주파수 계산에도 이용할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.141-144
• /
• 2002

Computer code was developed to design waveguide gratings based on coupled-mode equations and the transfer matrix formalism. The experimental set-up has been constructed for inscribing Bragg gratings in planar waveguides with a phase mask and uv laser beam, which enables alignment and packaging of grating devices as well as in-situ performance measurements. Bragg grating has been fabricated on silica planar waveguides with 0.75% Germanium concentration and its transmittance spectrum was measured to have 95% reflectance at the peak wavelength. Optical losses as the function of the misalignment were measured and their usage is described.