• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.29-34
• /
• 2008

The propagation characteristics of novel grating-assisted multimode interference (GA-MMI) coupler are explicitly and theoretically investigated by using longitudinal modal transmission-line theory (L-MTLT). The coupling efficiency of GA-MMI coupler is evaluated along the variation of grating thickness and duty cycle, and the spectrum is analyzed numerically. The numerical results reveal that the coupling length and the efficiency of $2{\times}2$ GA-MMI coupler along the variation of grating structure have low tolerance and the bandwidth varies dramatically along the output states.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1117-1122
• /
• 2005

This paper is studied the high-repetition rate optical-pulse stream generation using optical loop mirror coupler. With the recent development of the ultrahigh-speed optical time division multiplexed system, hish-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse separation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme.

• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.156-162
• /
• 2001

Novel pressure sensor using the resonance wavelength shift of single mode fiber-to-planar waveguide coupler, was demonstrated. It is found that the resonance wavelength shift due to refractive index variation of polymers by pressure occurs and its sensitivity depends on materials. We adopted symmetric structure of planar waveguide and remove the polarization dependence which is inevitable with side-polished fiber. AZ4562, AZl512 and THB-30 are used as planar waveguide materials and the resonance wavelength shifting by pressure was shown -0.008um/bar, 0.033nm/bar and 0.16nm/bar, respectively.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.330-333
• /
• 2000

With the recent development of the ultrahigh-speed optical time division multiplexed system, high-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse seperation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.302-303
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.56-57
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.357-358
• /
• 2008

• Korean Journal of Optics and Photonics
• /
• v.6 no.1
• /
• pp.21-25
• /
• 1995

Q-switched Waveguide $CO_{2}$ laser using polygon mirror were constructed and their output characteristics were measured. Waveguide was made of the beryllium oxide tube of inner diameter of 2 mm, outer diameter of 20 mm, and length of 200 mm. A flat ZnSe output coupler of 80% reflectivity was placed on the 9 mm distance from the end of the waveguide. Convex lens was used to reduce the coupling loss between the polygon mirror and the waveguide. The polygon mirror was located behind of convex lens. With this condition, continuous output of the laser were measured as 1.2 W. In the Q-switched mode. pulse width 120 ns were measured with rotational speed 7,559 RPM. and peak power of up to 250 W. 250 W.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.53-59
• /
• 2000

Based on the polarization selectivity of fiber-to-planar waveguide coupler, a novel fiber optic polarizer has been designed and fabricated. The large structural birefringence of a metal-clad planar waveguide enables the polarizer to have wide operating wavelength range. The polymer and gold were used for the guiding layer and cladding layer of the planar waveguide, respectively. The experimental results showed that either TE or TM polarized lightwave could be created by adjusting the thickness of planar waveguide. Operating wavelegth range satisfying more than 16㏈ polarization extinction ratio was 130nm. The average insertion loss of fabricated devices was order of 0.5㏈.

• Journal of the Optical Society of Korea
• /
• v.6 no.3
• /
• pp.117-120
• /
• 2002

Side-polished single-mode fiber covered with a thick planar-glass-waveguide is studied as a polarization-insensitive fiber-optic refractometer The properties of the device are very sensitive to the index variation of an upper cladding on top of the overlay waveguide. We investigate the spectral response, the polarization properties, and the relationship between the shift in coupling wavelength and the index variation of an upper cladding layer Index resolutions of the order of 10-4 have been achieved.