• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.143-146
• /
• 1989

Narrowband bandpass waveguide filters using inducive post obstacles are designed and constructed to have an equal-ripple bandwidth of 50MHz at a center frequency of 9GHz. Both the triple-post and the single-post configurations are realized and compared. The measured results for both filters show good agreement with the theoretical calculations. When the two filters are compared, the performance of the triple-post filter is better than that of the single-post filter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.108-114
• /
• 1998

This paper presents the design and fabrication of waveguide E-plane metal insert bandpass filter for milli-meter waves which is analyzed transmission characteristics by calculating the generalized scattering matrix using mode-matching method. The bandpass filter was fabricated to verify the proposed method by the WR-34 rectangular waveguide to operate in 30.085 ~ 30.885 GHz. The fabricated waveguide E-plane metal insert band- pass filter was established the fact that it is so adaptive for milli-meter waves due to the measured data closely consistent with the results of analysis using mode-matching method, that is, the maximum value of insertion loss is 0.8 dB and the return loss is below -15 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.990-995
• /
• 2000

As the interest in the millimeter wave frequency (30 ~300 GHz) increases, Nonradiative Dielectric (NRD) guide is being more attractive due to its low loss characteristics. Most of millimeter wave components, which can be realized with waveguide, can also be realized with NRD guide since NRD guide has similar dispersion characteristics and field patterns to waveguide. Previously, Variational Method was applied to the gap discontinuity problem to design a gap-coupled NRD bandpass filter. In this paper, the design procedure was simplified by replacing the air gap region with an equivalent circuit model of an evanescent waveguide using the fact that the NRD guide has a similar structure with a dielectric-filled metal waveguide. Prior to applying this design method to the bandpass filter of millimeter wave frequency range, a bandpass filter of which center frequency is 10 GHz(3-Pole, 0.1 dB ripple, 2% fractional bandwidth) was designed and fabricated. The measured result agrees with one simulated with HFSS within an error range of a fabrication.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.130-135
• /
• 2002

In this paper, it is designed mobile communication base station module type bandpass filter which is recently used coplanar waveguide in many way because of structural merit. Using Conductor-Backed Coplanar waveguide of Itoh, it is determined the value of impedance which had capable impedance value with selected H in 2.4 and proved the impedance of each sections. It use the commensurate line of $\lambda$/4, fixed a space of between two ground line and calculated the width of signal line. Because designed filter less than microstrip filter in space, it obtained excellent characteristic of 15dB throughout all passband and sharp cut-off characteristic.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.7
• /
• pp.36-42
• /
• 1995

In this paper, the CAD program for designing the microwave waveguide narrow-band bandpass filters has been developed by the passband correction method with filter synthesis for the MDR(Microwave Digital Relay) system. Here, the modified double E-plane structures are employed in the filter structure which is analyzed by the variational method. Using the developed CAD program, 0.01dB equi-ripple chebyshev type 6-section bandpass filters used in the MDR system operating nationally is designed at the center frequency of 11.0GHz, fabricated with tunable type and then measured by tuning process. The experimantal results show good agreements with the theoretical results.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.5
• /
• pp.36-44
• /
• 1993

In this paper, a simple design method is represented for a contiguous-band waveguide manifold diplexer which employs a half-wavelength line at the input port of the singly terminated bandpass filterand has resonant-slot coupled E-plane T-junctions. This design method is based on the fact that the input impedance characteristics of the singly terminated bandpass filter are approximately unchanged when a resonant slot and a half-wavelength line at the input port of the filter are employed. This design method is also applicable to the design of the multiplexer. A contiguous-band waveguide manifold diplexer using the post coupled cavity filters is designed, constructed, and tested. The computed and experimental results show the validity of the theory.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.165-166
• /
• 2006

By using a ceramic material with dielectric constant 37, the miniature waveguide ceramic bandpass filter was implemented. The proposed waveguide ceramic bandpass filte was based on the mode matching method and simulation process. For overcoming high power, We used the connector at in/output of waveguide ceramic bandpass filte. The result of power test satisfied the 30W. The product will used as a parts of repeater for wibroband.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.35-44
• /
• 1995

In this paper, the single E-plane structure which is inserted in the slot of waveguide tube for good yield has been proposed and analyzed by the variational method. A CAD program for designing of the narrow-band waveguide bandpass filters has been developed by the passband correction method with filter synthesis theory. Using the developed CAD program, 0.02dB equi-ripple Chebyshev type 5-section bandpass filter is designed at the center frequency of 3.82GHz, fabricated with tunable structure. The experimental results show good agreements with the theoretical results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.581-584
• /
• 2002

In this work, a CPW resonator was designed and fabricated to investigate the basic microwave properties, such as effective dielectric constant, of BST thin films. Their properties were used as basic data to simulate and design CPW tunable bandpass filter. We also report on gold/$Ba_{0.5}Sr_{0.5}TiO_3$(BST) ferroelectric thin film C-band tunable bandpass filters(BPFs) designed and fabricated on magnesium oxide substrates using CPW structure. The 2 pole filter was designed for a center frequency of 5.88 GHz with a bandwidth of 9 %. The BST based CPW filter offers a high sensitivity parameter as well as a low loss parameter. The tuning range for the bandpass filter with CPW structure was determined to be 170 MHz.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.7
• /
• pp.43-50
• /
• 1995

In this paper, the variational method are used for the filter analysis methods and a CAD program for the design of the waveguide low-loss bandpass filters using inductive window structures for the VSAT(Very Small Aperture Terminal) system has been developed based on the passband correction method combined with fiter synthesis procedures. Using the developed CAD program, 0.01dB equi-ripple chebyshev type 6-section bandpass filters which are sued in the VSAT system operating nationally are designed for the purpose of the Down-link of 12.75~13.25GHz and the Up-link of 14.0~14.5GHz, fabricated and mesured. The measured results are good agreement woth the theoretical resuls.