Analysis and Fabrication of Waveguide E-Plane Metal Insert Bandpass Filter for Milli-meter Waves

밀리미터파를 위한 도파관 E-면 금속삽입 대역통과 여파기의 설계 및 제작에 관한 연구

  • 이용민 (광운대학교 전자공학과) ;
  • 박종화 (정수기능대학 전자기술과) ;
  • 최진일 (정수기능대학 전자기술과) ;
  • 전형준 (광운대학교 전자공학과) ;
  • 나극환 (광운대학교 전자공학과)
  • Published : 1998.02.01

Abstract

This paper presents the design and fabrication of waveguide E-plane metal insert bandpass filter for milli-meter waves which is analyzed transmission characteristics by calculating the generalized scattering matrix using mode-matching method. The bandpass filter was fabricated to verify the proposed method by the WR-34 rectangular waveguide to operate in 30.085 ~ 30.885 GHz. The fabricated waveguide E-plane metal insert band- pass filter was established the fact that it is so adaptive for milli-meter waves due to the measured data closely consistent with the results of analysis using mode-matching method, that is, the maximum value of insertion loss is 0.8 dB and the return loss is below -15 dB.

본 논문에서는 도파관 E 면 금속삽입 방볍에 의한 밀리미터파 대역통과 여파기의 설계를 위해 모드매칭법에 의해 산란행렬올 계산하여 설계한 여파기의 전달특성을 분석하고, 설계 방법의 타당성 여부 검증을 위해 WR-34 구형 도파관을 사용하여 30.085-30.885 GHz 대역의 대역통과 여파기를 설계, 제작하였다. 설계, 제작된 대역통과 여파기의 전달특성은 모드매칭법에 의한 해석파 거의 일치하게 측정되었으며, 통과대역내 삽입손실은 최대 0 0.8 dB, 반사손실 -15 dB의 우수한 여파특성을 나타냉으로써 도파관 E-면 금속삽입 형태에 의한 밀리미터파용 대역통과 여파기로서의 적합성을 입증하였다.

Keywords

References

  1. IEEE Trans. on microwave Theory and Tech. v.MTT-23 no.2 Wide-band network Modeling of Interacting Inductive Irises and Steps J. E. Rozzi;Wolfgang F. G;Mecklenbrauker
  2. IEE Proc. v.133 no.2 Metal-insert filters with improved characteristics J. Bornemann;F. Arndt
  3. Waveguide Components for Antenna Feed Systems : Theory and CAD J. Uher
  4. IRE. Prco. Minimum Insertion Loss Filters E. G. Fubini;E. A. Guilkmin
  5. IEEE Trans. on Microwave Theory and Tech. v.MTT-32 no.12 Broad-Band Millimeter-Wave E-Plane Bandpass Filters L. Q. Bui;D. Ball;T. Itho