• 전자공학회논문지D
• /
• 제34D권10호
• /
• pp.45-52
• /
• 1997

An analysis method for the electromagnetic scattering of a gaussian beam wave by finite periodic conducting strip grating on a groudned dielectric slab is considered. The intergral equation for the unknown current induced on the conducting strip surface is derived and solbed numerically by use of the method of moment. From knowledge of the strip current, the quantities of interest such as radiation pattern, the space wave power radiated into the free space, and the coupled surface wave power propagating along the dielectric slab are computed for the appropriately chosen parametes Some similarity between scattering behaviours of the present geometry and the infinite geometry is examined by observing the Off-bragg as well as bragg blaxing penomena in both geometries.The validity of the numerical results are assured by a check of the power conservation relations.

• Journal of Ship and Ocean Technology
• /
• 제11권3호
• /
• pp.1-13
• /
• 2007

A semi-submersible drilling rig is regarded as one of the typical offshore structures operated in the field with moderate environments such as the Gulf of Mexico, Brazil, and West Africa. Its typical roll and pitch natural periods are around 30 seconds, which avoids prevailing regions of the wave energy spectrum, and their responses in waves are quite acceptable for common operation conditions. But large roll and pitch motions can be induced by wave difference frequency energy spectrum if the metacentric heights of a semi-submersible decrease to small values in some loading conditions, and it is because the roll and pitch natural periods increase and approach to the region where the spectral density of the low frequency wave drift moment has significant value. This paper describes the low frequency roll motion of a semi-submersible that are excited by the wave 2nd order difference frequency energy by a series of model experiments. From the model tests with several different initial metacentric heights (GM), it was observed that a semi-submersible can experience large roll motion due to the wave group spectrum.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.111-112
• /
• 2008

Induced electromagnetic fields of printed circuit board are computed using method of moment. In this calculation PEC and dielectric boards are considered when exposed to the external fields. The volume and surface integral equations are presented for the electromagnetic wave scattering from plate structures composed of dielectric and conducting objects. To reduce the computing time a fast multipole technique is applied.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.387-398
• /
• 2020

In the design stage of the very large container ships, some methodologies for the whipping effects have been developed, but most of them are based on single sea state. We developed a methodology that considers multiple sea states. Fluid-structure Interaction (FSI) analyses with one dimensional structural model were carried out to capture slamming-induced transient whipping behaviors. Because of the nature of random phases of the applied wave spectra, the required period for entire FSI analyses was determined from the convergence study where the whipping effect became stable. Low pass filtering was applied to the transient whipping responses to obtain the hull girder bending moment processes. Peak counting method for the filtered whipping responses was used to obtain collection of the vertical bending moment peaks. The whipping effect from this new method is compared with that from based on single sea state approach. The efficiency and advantage of the new methodology are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.439-441
• /
• 1988

The induced currents on a uniform resistive strip by a H-polarized plane wave are obtained by the iteration method in the spectral domain and compared with the results by the moment method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.923-938
• /
• 2019

Surge motion of top-end platform induced by periodic wave makes marine flexible riser encounter equivalent sheared-oscillatory flow, under which the Vortex-induced Vibration (VIV) response will be more complicated than pure sheared flow or oscillatory flow cases. Based on a time domain force-decomposition model, the VIV response characteristics under sheared-oscillatory flows are investigated numerically in this paper. Firstly, the adopted numerical model is validated well against laboratory experiments under sheared flow and oscillatory flow. Then, 20 sheared-oscillatory flow cases with different oscillation periods and top maximum current velocities are designed and simulated. Under long and short oscillation period cases, the structural response presents several similar features owing to the instantaneous sheared flow profile at each moment, but it also has some different patterns because of the differently varying flow field. Finally, the effects and essential mechanism of oscillation period and top maximum current velocity on VIV response are discussed systematically.

• 한국항행학회논문지
• /
• 제15권3호
• /
• pp.349-354
• /
• 2011

본 논문에서는 스트립 폭과 격자주기, 유전체 층의 비유전율과 두께, 그리고 transverse electric (TE) 평면파의 입사각에 따른 접지된 유전체 평면위의 스트립 양끝에서 0 저항율을 갖는 저항띠 격자구조에 의한 H-분극산란 문제를 Fourier-Galerkin Moment Method (FGMM)를 이용하여 해석하였다. 저항띠의 변하는 저항율은 저항띠의 양끝에서 0으로 변하는 경우를 취급하였고, 이때 저항띠 위에서 유도되는 전류밀도는 직교다항식의 일종인 2종 Chebyshev 다항식의 급수로 전개하였다. 반사전력의 급변점들은 공진효과에 기인한 것으로 과거에 wood's anomallies라고 불리워지며, 반사전력에 대한 수치결과들은 기존 논문의 균일 저항율의 수치 결과들과 비교하였다.

• 한국항행학회논문지
• /
• 제15권4호
• /
• pp.543-548
• /
• 2011

본 논문에서는 스트립 폭과 격자주기, 유전체 층의 비유전율과 두께, 그리고 TE(transverse electric) 평면파의 입사각에 따른 접지된 유전체 평면위의 변하는 저항율을 갖는 저항띠 격자구조에 의한 H-분극 전자파 산란문제를 FGMM(Fourier-Galerkin Moment Method)를 이용하여 해석하였다. 저항띠의 변하는 저항율은 한쪽 모서리에서는 유한하고 다른쪽 모서리에서 0 저항율을 가지며, 이때 저항띠 위에서 유도되는 표면 전류밀도는 직교다항식의 일종인 차수가 ${\alpha}=1$, ${\beta}=0$인 Jacobi 다항식의 급수로 전개하였다. 정규화된 반사전력의 수치결과는 기존의 수치결과와 매우 일치하였다.

• 정보학연구
• /
• 제8권2호
• /
• pp.77-84
• /
• 2005

In this paper, electromagnetic scattering problems by a resistive strip grating with tapered resistivity on a grounded dielectric plane according to strip width and spacing, relative permittivity and thickness of dielectric layers, and incident angles of a electric wave are analyzed by applying the Fourier-Galerkin Moment Method known as a numerical procedure. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential electric field and the electric current density on the strip. The resistivity of resistive strips in this paper varies from zeroes at one edge to infinite at the other edge, then the induced surface current density on the resistive strip is expanded in a series of Jacobi polynomials of the order ${\alpha}=0.2,\;{\beta}=-0.2$ as a orthogonal polynomials. The numerical results of the geometrically normalized reflected power in this paper are compared with those for the existing perfectly conducting strip. The numerical results of the normalized reflected power for conductive strips case with zero resistivity in this paper show in good agreement with those of existing papers.

• Wind and Structures
• /
• 제11권2호
• /
• pp.97-120
• /
• 2008

Wind and wave loadings have a predominant role in the design of offshore structures in general, and articulated tower in particular for a successful service and survival during normal and extreme environmental conditions. Such towers are very sensitive to the dynamic effects of wind and wind generated waves. The exposed superstructure is subjected to aerodynamic loads while the submerged substructure is subjected to hydrodynamic loads. Articulated towers are designed such that their fundamental frequency is well below the wave frequency to avoid dynamic amplification. Dynamic interaction of these towers with environmental loads (wind, waves and currents) acts to impart a lesser overall shear and overturning moment due to compliance to such forces. This compliancy introduces geometric nonlinearity due to large displacements, which becomes an important consideration in the analysis of articulated towers. Prediction of the nonlinear behaviour of these towers in the harsh ocean environment is difficult. However, simplified realistic mathematical models are employed to gain an important insight into the problem and to explore the dynamic behaviour. In this paper, various modeling approaches and solution methods for articulated towers adopted by past researchers are reviewed. Besides, reliability of articulation system, the paper also discussed the design, installation and performance of articulated towers around the world oceans.