• Journal of Fashion Business
• /
• v.17 no.2
• /
• pp.151-163
• /
• 2013

In this research, with a goal of lessening the damage to hair by adding rose hip extract to permanent wave 1 solution and performing permanent wave procedure prior to acid dyeing and maximizing the effect of the procedure, rose hip extract 15%, 20% was added to each thioglycolate 1 solution and cysteine 1 solution and the procedure was performed. As a result, when performing the procedure by adding rose hip extract to permanent wave 1 solution thioglycolate and cysteine permanent wave 1 solution, the effect of wave effectiveness is increased and the damage to hair was confirmed to be low. Depending on the rose hip additive status in thioglycolate, the treatment effect of hair was shown to be beneficial. However, the limit of this research is that the thickness of hair strands for each person differs as well as the location of the hair contributing to the difference and therefore exact judgement regarding the shape of waves as well as the level of damage cannot be fully measured. In the following clinical tests, we will test the procedure on variety of hair types.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.2
• /
• pp.123-130
• /
• 2018

The present study investigated the validity of an equilibrium shoreline empirical formula for real phenomena. Among three types of equilibrium shoreline formulas, Hsu's parabolic type static formula was employed, which is well-known and the most practical for shoreline estimation after coastal or harbor structure construction. The wave data observed at Maengbang beach and the CERC formula on longshore sediment transport were used in the present investigation. A comparison study was only conducted for the case of a shoreline change after the construction of a groyne. Reasonable agreement was seen between the observed wave data and the data obtained under a wave angle spreading function S = 3.5. However, significant changes were observed when S increased. Thus, careful application is required when using Hsu's formula.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.320-326
• /
• 2016

Rip current forecasts, based on intensity, are marked in four levels—notice, watch, warning, and danger. However, numerical results are represented by current vectors, whose magnitudes are then converted into predictive levels. In the present study, the rose diagram is adapted as a determinative forecasting index and examined for the case of an ideal rip channel consisting of surface, bottom, and averaged currents. Further, it is employed in the sensitivity analysis of wave-induced currents generated by wave conditions at the Haeundae Beach. The simulation of surface onshore and bottom undertow currents is accomplished by including a mass flux term in the wave-averaged continuity equation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.525-533
• /
• 2009

Emphasis in the paper is placed on describing guided wave successes and challenges for applications in aircraft and composite materials inspection. Guided wave imaging methods discussed includes line of sight, tomography, guided wave C-scan, phased array, and ultrasonic vibration methods. Applications outlined encircles lap splice, bonded repair patch, fuselage corrosion, water loaded structures, delamination, and ice detection and de-icing of various structures.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.4
• /
• pp.371-382
• /
• 2001

The recognition of such natural wave guides as plates, rods, hollow cylinders, multi-layer structures or simply an interface between two materials combined with an increased understanding of the physics and wave mechanics of guided wave propagation has led to a significant increase in the number of guided wave inspection applications being developed each year. Of primary attention Is the ability to inspect partially hidden structures, hard to access areas, and teated or insulated structures. An introduction to some physical consideration of guided waves followed by some sample problem descriptions in pipe, ice detection, fouling detection in the foods industry, aircraft, tar coated structures and acoustic microscopy is presented in this paper. A sample problem in Boundary Element Modeling is also presented to illustrate the move in guided wave analysis beyond detection and location analysis to quantification.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.6
• /
• pp.411-416
• /
• 2006

The critical subject of transverse crack detection in a rail head is treated in this paper. Conventional bulk wave ultrasonic techniques oftenfail because of shelling and other surface imperfections that shield the defects that lie below the shelling. A guided wave inspection technique is introduced here that can send ultrasonic energy along the rail under the shelling with a capability of finding the deleterious transverse crack defects. Dispersion curves are generated via a semi analytical finite element technique along with a hybrid guided wave finite element technique to explore the most suitable modes and frequencies for finding these defects. Sensor design and experimental feasibility experiments are also reported.

• Journal of the Ergonomics Society of Korea
• /
• v.13 no.2
• /
• pp.43-48
• /
• 1994

Among many kinds of odors, some are known to have effects of sedation or stimulation on brain activity. In this study, brain activity levels affected by four kinds of fragrance0lemon, lavender, jasmine, and rose-were tested using EEG recording. In the first experiment, the quality of alpha wave was examined under controlled rest condition. In the second experiment, the event-related potential (ERP) and contingent negative variation (CNV) were investigated during a simple reaction tasks (SRT) against auditory signal. EEG data obtained for the rest condition were analyzed suing "3-Dimensional Viewer)" which was developed by ourselves to show the chaotic attractor of the signal. Power spectrum were also calculated using FET. EEG data obtained during the SRT were analyzed by comparing CNV amplitudes about each odor condition. Results confirmed the sedative effect of the lemon and the lavender, and the stimulative effect of the jasmine and the rose.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.79-85
• /
• 2003

One of unique characteristics of guided waves is a dispersive behavior that guided wave velocity changes with an excitation frequency and mode. In practical applications of guided wave techniques, it is very important to identify propagating modes in a time-domain waveform for determination of defect location and size. Mode identification can be done by measurement of group velocity in a time-domain waveform. Thus, it is preferred to generate a single or less dispersive mode But in many cases, it is difficult to distinguish a mode clearly in a time-domain waveform because of superposition of multi modes and mode conversion phenomena. Time-frequency analysis is used as efficient methods to identify modes by presenting wave energy distribution in a time-frequency. In this study, experimental guided wave mode identification is carried out in a steel plate using time-frequency analysis methods such as wavelet transform. The results are compared with theoretically calculated group velocity dispersion curves. The results are in good agreement with analytical predictions and show the effectiveness of using the wavelet transform method to identify and measure the amplitudes of individual guided wave modes.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1087-1094
• /
• 2005

This paper presents the validity and limitation of the thin-shell approach for the analysis of elastic wave propagation in a pipe with nonviscous liquid. The phase velocities calculated by the thin-shell approach were compared with those calculated by the thick-cylinder approach. In contrast to the case of the empty pipe, where only two modes were obtained and the first mode was calculated in a limited frequency range, the results for the liquid-filled pipe exhibits a large number of modes due to the large number of branches of the apparent liquid mass. Several of the lowest modes of the waves in a liquid-filled pipe were calculated for various pipe thicknesses in a low frequency range. The thin-shell approach was valid for a reasonable range of pipe thicknesses.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.258-263
• /
• 2004

An efficient technique for the calculation of guided wave dispersion curves in composite pipes is presented. The technique uses a forward-calculating variational calculus approach rather than the guess and iterate process required when using the more traditional partial wave superposition technique The formulation of each method is outlined and compared. The forward-calculating formulation is used to develop finite element software for dispersion curve calculation. Finally, the technique is used to calculate dispersion curves for several structures, including an isotropic bar, two multi-layer composite bars, and a composite pipe.