• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2201-2210
• /
• 2002

The accurate analysis of ultrasonic wave propagation and scattering plays an important role in many aspects of nondestructive evaluation. A numerical analysis makes it possible to perform parametric studies, and in this way the probability of detection and reliability of test results can be improved. In this paper, a finite element method was employed for the analysis of ultrasonic wave propagation in anisotropic materials, and the accuracy of results was checked by comparing with analytical predictions. The element size and the integral time step, which are the critical components for the convergence of finite element solutions, were determined using a commercial finite element code. Some differences for wave propagation in anisotropic media were illustrated when plane waves are propagating in a unidirectionally reinforced composite materials. When plane waves are propagating in nonsymmetric directions in a symmetric plane, deviation angles between the wave vector and the energy vector were found from finite element analyses and the results agreed well with analytical calculations.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.835-840
• /
• 2000

The objective of the present study is to investigate the characteristics of pressure wave propagation of viscous fluid flow in a circular pipe line. The goal of this study is to select the best frequency of each control factor of a circular pipe. We intend to approach a formalized mathematical model by a very exact and reasonable polynomial for fluid transmission lines. and we computed this mathematical model by computer. The results show that the oil viscosity decreased as the length of the circular pipe increases. and The energy of pressure wave propagation decreased as the pipe diameter decreases. The factor is that density of oil was changed resonant frequency. It has been found the viscosity characteristics is changed largely by length of hydraulic pipe and volume of cavity tank.

• Journal of Astronomy and Space Sciences
• /
• 제32권2호
• /
• pp.151-159
• /
• 2015

The fundamental conception in physics of the propagation of the electromagnetic wave polarization in matter is newly understood as the cardinal keyword in free-space quantum communication technology and cosmology in astrophysics. Interactive visualization of the propagation mechanism of polarized electromagnetism in a medium with its helicity has accordingly received attention from scientists exploiting the protocol of quantum key distribution (QKD) to guarantee unconditional security in cryptography communication. We have provided a dynamic polarization platform for presenting the polarization modes of a transverse electromagnetic wave, converting the state of polarization through the arrangement of optical elements, using Jones vectors calculations in Methematica. The platform graphically simulates the mechanism of production and propagation of the polarized waves in a medium while satisfying Maxwell's equations.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.383-411
• /
• 2012

The objective of the present paper is to review and implement the most recent developments in the Spectral Element Method (SEM), as well as improve aspects of its implementation in the study of wave propagation by numerical simulation in elastic unbounded domains. The classical formulation of the method is reviewed, and the construction of the mass matrix, stiffness matrix and the external force vector is expressed in terms of matrix operations that are familiar to earthquake engineers. To account for the radiation condition at the external boundaries of the domain, a new absorbing boundary condition, based on the Perfectly Matched Layer (PML) is proposed and implemented. The new formulation, referred to as the Multi-Axial Perfectly Matched Layer (M-PML), results from generalizing the classical Perfectly Matched Layer to a medium in which damping profiles are specified in more than one direction.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.688-694
• /
• 1998

The ability to locate the defects in materials is one of the major attrations of the acoustic emission(AE) technique. The most conventional method for planar AE source localization is to place three or more AE sensors on the plate and to determine the source position by measuring the differences in the arrival times of the AE wave at the sensors, which is called as triangulation method. But this method can not be applied in the material of which elastic wave propagtion velocity is not known. In this paper, we propose two methods, vector method and error minimization method, for AE source location on the material with unknown AE wave velocity. In this method, it is not needed to know the propagation velocity previously, that is, we can apply this method to arbitrary material of which properties are not known exactly. Also, in this paper, the robustness to the error in the measurement of time differences are discussed for both methods. Finally, in order to evaluate the actual performances, experiments using a pencil lead break as the AE source were carried out on the aluminum plate.

• 한국전자파학회논문지
• /
• 제7권5호
• /
• pp.376-383
• /
• 1996

일반적인 수직 다이폴 안테나에 대한 전자계 해석은 공간파 성분을 주로 다루고 있다. 하지만 공간파 성분만을 고려하띤 수산점이 매칠 표면에 가까울수록 수신 전계강도가 급격히 떨어진다. 본 논문에서는 이라한 문제점을 보완하기 위해 표면파 성분을 공간파 성분과 함께 고려하였다. 표변파 성분을 유도하기 위해 벡더 포텐셜을 각 스펙트럼으로 변환하여 해석하면 최종적인 전계식에 공간파 성분과 표면파 성분이 포함된다 이러한 최종전계식을 이용하여 해면에서 나타나는 표면파 영향을 분석하고 그래프를 통하여 해 면천파 현상에 영향을 미치는 요소에 대해 세부적으로 고찰하였다. 또한 이동 통신 주파수대인 880,2MHz에서의 측정값을 그래프를 통해 이론값과 비교함으로써 이론식의 타당성을 입증하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.272-277
• /
• 2004

The elastic waves in the plate are dispersive waves with the characteristics of Lamb waves. However, $S_0$ symmetric mode is less dispersive in the frequency region less than first cut-off frequency. And, in anisotropic plates such as CFRP plates, the propagation velocities vary with the direction. So, the wave vector direction to be the phase velocity direction is not accord with the energy flow direction to be the group velocity direction. In this work, the group velocities of the $S_0$ symmetric mode less than the first cut-off frequency was analyzed with the group velocity dispersion curves in unidirectional CFRP plate. And, the group velocity curve obtained by the group velocity dispersion curves are compared with the measured velocities as varied the propagation direction of the Lamb wave. The measured velocities are good agreement with the corrected group velocity curve except near the fiber direction which is called the cusp region. When the propagation direction is not accorded with the principal axis, the direction of the group velocities declines to the fiber direction in the unidirectional CFRP plates. This implies that the energy propagates preferentially toward fiber direction.

• Coupled systems mechanics
• /
• 제10권1호
• /
• pp.21-38
• /
• 2021

This work is an attempt to design a dynamic model for a non local bio-thermoelastic medium with diffusion. The system of governing equations are formulated in terms of displacement vector field, chemical potential and the tissue temperature in the context of non local dual phase lag (NL DPL) theories of heat conduction and mass diffusion. Based on this considered model, we study the fundamental solution and propagation of plane harmonic waves in tissues. In order to analyze the behavior of the NL DPL model, we construct basic theorem in the terms of elementary function which determine the existence of three longitudinal and one transverse wave. The effects of various parameters on the characteristics of waves i.e., phase velocity and attenuation coefficients are elaborated by plotting various figures of physical quantities in the later part of the paper.

• 한국음향학회지
• /
• 제34권2호
• /
• pp.108-116
• /
• 2015

수중 음향 벡터센서는 음압 뿐 아니라 음파의 진행 방향에 관한 정보를 측정할 수 있는 센서이다. 본 논문에서는 미세 외팔보를 이용한 수중 음향 벡터 센서를 구현하기 위해 음향학적 이론을 바탕으로 음향과 기계 구조물의 상호작용을 이론적으로 정립하고자 하였다. 감응 방식으로 압전 효과를 이용한 두 가지 유니모프(unimorph)형태의 모델을 제시하였으며, 제시된 모델에 대하여 압전 미세 외팔보의 거동을 집중 질량 모델을 통해 음파가 임의의 주파수와 각도를 가지고 미세 외팔보로 입사할 때 나오는 신호의 크기를 구할 수 있는 전달함수를 유도하였다. 또한 이를 바탕으로 매우 얇고 유연한 구조물로 미세 외팔보를 설계하면 매질의 입자 속도에 관한 정보를 직접적으로 측정 가능한 센서로 활용할 수 있다는 것을 확인하였다.

• 한국음향학회지
• /
• 제25권3호
• /
• pp.107-112
• /
• 2006

판재를 따라 전파하는 Lamb wave (램파)는 주파수에 따라 속도가 변하는 분산특성을 갖는다. 일반적으로 등방성 재료에서는 파수 벡터 방향과 에너지 흐름 방향은 같아, 파면이 원형을 유지하면서 전파하지만, 복합재료와 같이 이방성재료에서는 파수 벡터와 에너지 흐름 방향이 서로 다르다. 따라서 이방성 재료에서 하나의 속도에서 다른 속도로 전환하려면 방향을 교정해야 하고 이에 따라 크기도 달라지게 된다. 본 연구에서는 복합재료 판재에서 전파하는 램파 분산방정식을 이용하여 대칭, 비대칭 모드의 분산선도를 작성하였고, 각도에 따라구한 위상속도 분산선도에서 얻어진 위상속도 값으로 slowness surface를 구한 후, 이로부터 군속도의 크기와 방향을 교정하였고, 이를 실험적으로 측정한 속도값과 비교하여 서로 일치함을 확인하였다.