• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.401-408
• /
• 2012

The amplitude error of phase modulator used in closed-loop fiber optic gyroscope has occurred by the temperature dependency of the electro-optic coefficient, and also can be due to the square-wave dither signal which is generally applied for eliminating the deadzone. This error can cause bias drift and scale factor error. This paper analyzes the temperature dependency of the modulation amplitude and the relationship with the scale factor of the gyroscope, and deals with an amplitude control method. The error calculation logic considering the dither signal is implemented on the signal processing module. The result of experiments from a prototype gyroscope shows the effect of the modulation amplitude control and a considerable improvement on performances.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.466-476
• /
• 2021

Frequency-multiplication technology based on microwave photonic principles can be used to generate microwave and millimeter wave signals with a wide frequency tuning range. However, the existing cascaded external modulation frequency-tupling scheme needs to ensure the phase coherence of the modulated Radio Frequency (RF) signal, while the phase modulation directly limits the frequency tuning range of the external modulation frequency multiplication. In this paper, a novel approach for generating an incoherent frequency 12-tupling signal with cascade modulation is proposed. The structure of cascaded dual-parallel Mach-Zehnder modulators can generate a frequency 12-tupling signal. The proposed structure uses no filter or phase control of the RF driving signal. Microwave photonic frequency-tupling was realized under incoherent conditions. Software simulations and experiments validated the proposed structure and proved that it can generate frequency 12-tupling microwave signals under incoherent conditions. Both the frequency range and reliability of the frequency-tupling system has been improved by the proposed structure.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.39-42
• /
• 2006

The paper reports on the first experimental evidence for space-observed manifestation of the open ocean tsunami in the microwave radar backscatter (in C- and Ku-bands). Significant variations of the radar cross section synchronous with the sea level anomaly were found in the geophysical data record of the altimetry satellite Jason-1 for the track which crossed the head wave of the catastrophic tsunami of 26 December 2004. The simultaneous analysis of the available complementary data provided by the satellite three-channel radiometer enabled us to exclude meteorological factors as possible causes of the observed signal modulation. A possible physical mechanism of modulation of short wind waves due to transformation of the thin boundary layer in the air by a tsunami wave is discussed. The results open new possibilities of monitoring tsunamis from space..

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.2
• /
• pp.1-6
• /
• 1973

Traveling wave laser phase modulator, which is consist of rectangular waveguide paritially loaded with electrooptic material, is analysed theoretically. The propagation characteristics, electric field, attenuation, and modulation index are obtained in terms of normalized parameters. It is shown that high modulation index is achieved with relatively low modulating power. And also design procedure of modulator is described with particulary refererenece to KDP.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.2
• /
• pp.157-163
• /
• 1990

The PWM inverter investigated in this paper utilizes a bridge type current sharing reactor circuit with tow pairs of complementary transistor at each phase. The driving signals for this inverter are 3 level PWM waves of W type an M type modulation, which are obtained from a microprocessor based on the switching time data obtained by switching position calculation of triangular and sine modulation wave. The output voltage waveforms of this inverter have 5 level phase voltage and 9 level line voltage of PWM. The harmonics of the output voltage are reduced to half when it is compared with single CTI, and the occurrence of harmonics is also reduced.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.2
• /
• pp.1-12
• /
• 1970

In this paper, theoretical and experimental study about the light modulation at X-band(9375MHz) micro wave, using the linear electro-optic effect, has been described. The electro-optic crystal, KDP (potassium dihydrogen phosphate)is used for modulator crystals which is composed resonated modulator. Output performances of modulated wave through movable short positions are presented. It was critically respond from 2. And the output modulated intensity was compared with theoretical curve. Consequently, in spite of many problems remain yet, most promissing and more sucessful modulator configurations are compleely given.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.364-368
• /
• 2012

We generate 10 GHz short pulses from a continuous wave laser at 1.5 um by cascaded intensity and phase modulation, followed by chirp compensation using a single mode fiber. The measured spectral and pulse widths are 0.64 nm and 5.7 ps respectively, resulting in the time-bandwidth product of 0.46.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.12a
• /
• pp.7-8
• /
• 2011

Although yttrium iron garnet (YIG) has provided a great vehicle for the study of spin waves in the past, associated difficulties in film deposition and device fabrication using YIG had limited the applicability of spin waves to practical devices. However, microfabrication techniques have made it possible to characterize both the resonant as well as the travelling characteristics of spin waves in permalloy (Py). A variety of methods have been used for measuring spin waves, including Brillouin light scattering (BLS), magneto-optic Kerr effect (MOKE), vector network analyzer ferromagnetic resonance (VNA-FMR), and pulse inductive microwave magnetometry (PIMM). PIMM is one of the most preferred methodologies of measuring travelling spin waves. In this method, an electrical impulse is applied at one of two coplanar waveguides patterned on top of oxide-insulated Py, producing a local disturbance in the magnetization of the Py. The resulting disturbance travels down the Py in the form of waves, and is inductively picked up by the other coplanar waveguide. We investigate the effect of the pulse width of excitation pulses on the generated spin wave packets using both experimental results and micromagnetic simulations. We show that spin wave packets generated from electrical pulses are a superposition of two separate spin wave packets, one generated from the rising edge and the other from the falling edge, which interfere either constructively or destructively with one another, depending upon the magnitude and direction of the field bias conditions. A method of spin wave amplitude modulation is also presented by the linear superposition of spin waves. We use interfering spin waves resulting from two closely spaced voltage impulses for the modulation of the magnitude of the resultant spin wave packets.

• Journal of the Optical Society of Korea
• /
• v.5 no.3
• /
• pp.99-109
• /
• 2001

This paper presents a phase-only modulation scheme for a three-dimensional (3-D) image matching system to improve optical efficiency of the system. The 3-D image matching system is based on the two mask heterodyne scanning. A hologram of the 3-D reference object is first created and then the phase of the hologram is extracted. The phase of the hologram is represented as one mask with the other mask being a plane wave. The superposition of each beam modulated by the two masks generated a scanning beam pattern. This beam pattern scans the 3-D target object to be recognized. The output of the scanning system gives out the correlation of the phase-only hologram of the reference object and the complex hologram of the target object. Since a hologram contains 3-D information of an object as a form of fringe pattern, the correlation of holograms matches whole 3-D aspect of the objects. Computer simulations are performed with additive gaussian noise and without noise for the complex hologram modulation scheme and the phase-only hologram modulation scheme. The computer simulation results show that the phase-only hologram modulation scheme improves the optical efficiency. Thus the system with the phase-only hologram modulation scheme is more robust than the system with the complex hologram modulation scheme.