• 한국해양공학회지
• /
• 제30권6호
• /
• pp.505-519
• /
• 2016

If the seabed is exposed to high waves for a long period, the pore water pressure may be excessive, making the seabed subject to liquefaction. As the water pressure change due to wave action is transmitted to the pore water pressure of the seabed, a phase difference will occur because of the fluid resistance from water permeability. Thus, the effective stress of the seabed will be decreased. If a composite breakwater or other structure with large wave reflection is installed over the seabed, a partial standing wave field is formed, and thus larger wave loading is directly transmitted to the seabed, which considerably influences its stability. To analyze the 3-D dynamic response characteristics of the seabed around a composite breakwater, this study performed a numerical simulation by applying LES-WASS-3D to directly analyze the wave-structure-soil interaction. First, the waveform around the composite breakwater and the pore water pressure in the seabed and rubble mound were compared and verified using the results of existing experiments. In addition, the characteristics of the wave field were analyzed around the composite breakwater, where there was an opening under different incident wave conditions. To analyze the effect of the changed wave field on the 3-D dynamic response of the seabed, the correlation between the wave height distribution and pore water pressure distribution of the seabed was investigated. Finally, the numerical results for the perpendicular phase difference of the pore water pressure were aggregated to understand the characteristics of the 3-D dynamic response of the seabed around the composite breakwater in relation to the water-structure-soil interaction.

• 한국항해항만학회지
• /
• 제38권5호
• /
• pp.463-470
• /
• 2014

본 논문에서는 선박의 예인에 필요한 예인력의 계산과 이를 검증하기 위한 실험 결과에 대해 언급하고 있다. 먼저 예인력의 계산에 있어서는 선박의 마찰저항, 풍압저항, 조파저항을 고려하였다. 아울러 프로펠러가 고착된 상태를 가정하여 프로펠러 저항을 계산하였다. 이와 더불어 예인 시 사용되는 예인삭에 걸리는 부가저항을 노드분석법을 적용하여 계산하였고, 선체 저항과 예인삭에서의 부가저항을 합하여 최종적인 예인저항을 도출하였다. 계산된 결과값의 유효성을 검증하기 위하여 목포해양대학교 실습선 새유달호를 활용하여 해상에서 예인실험을 수행하였고 이론적인 계산 결과와 실험 결과에 대한 비교를 행하였다. 소요 예인력의 이론적인 계산에서 주요한 요소는 예인속력임을 알 수 있었고, 예인속력의 증가에 따라 프로펠러 고착 저항이 저항의 주요한 부분을 차지하는 것을 확인하였다. 실제 실험을 통해서는 선박의 요잉에 의한 저항 증가분을 고려하는 것이 필요하다는 것을 알 수 있었다.

• 대한조선학회논문집
• /
• 제43권5호
• /
• pp.550-559
• /
• 2006

A design procedure for a ship with minimum total resistance was developed using a numerical optimization method called SQP(Sequential Quadratic Programming) and a CFD technique based on the Rankine source panel method with the nonlinear free surface boundary conditions. During the whole optimization process the geometry of the hull shape was represented based on the NURBS(Non-uniform rational B-spline) technique and the modification of the hull shape was controlled using the Bell-shaped distribution function to keep the fairness of the hull shape before and after the hull modification. The numerical analysis was carried out using 4000TEU container ship in the towing tank facility installed in the Pusan national university to know the validity of the developed algorithm for this study. As the results of the numerical analysis it proved that the resistance of the optimized hull is conspicuously reduced in comparison with the original hull in a wave-making resistance point of view.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.93-101
• /
• 2015

This paper provides numerical results of the simulation for the flow around the hull and the propeller of KCS model ship advancing in shallow water conditions. A finite volume method is used to solve the unsteady Reynolds averaged Navier-Stokes(RANS) equations, where the wave-making problem is solved by using a volume-of-fluid(VOF) method. The wave formed near the hull surface in shallow water conditions shows a deep trough dominant pattern that causes the loss of buoyancy followed by hull squat. The flow past the hull increases as the depth of water decreases. However, the axial flow velocity around the stern shows a reduction in magnitude by the effect of shallow water accompanied by the hull-propeller interaction. As a results, the thrust and torque coefficient increase about 8.3% and 6.2%, respectively for a depth of h/T=3.0 corresponding to a depth Froude number of $F_h=0.693$. The resistance coefficient increases about 11.6% at this Froude number condition.

• 해양환경안전학회지
• /
• 제24권4호
• /
• pp.467-474
• /
• 2018

본 연구의 목적은 2가지 선속에서 운항하는 선박의 선형 설계 자동화에 관한 것이다. 가장 기본적인 선박의 형상을 가지는 60계열($C_B=0.6$) 선박을 대상선박으로 선택하여 연구를 수행하였다. 선박 형상의 향상 방향은 저항성능 향상의 관점이며, 특히 선박의 형상과 밀접한 관계를 가지는 조파저항성능을 향상하기 위한 선박 형상 설계 자동화를 수행하였다. 본 연구의 목적을 실현하기 위하여 최적화 기법과 저항 성능을 예측하는 기법 그리고 선형의 형상을 변경하는 기법을 접목하여 선박 형상 설계 자동화 소프트웨어를 개발하였으며, 개발된 소프트웨어를 대상선박에 적용하였다. 최적화 기법으로는 순차이차계획법(sequential quadratic programming method)를 사용하였으며, 조파저항성능을 예측하기 위하여 포텐셜기저 패널법(potential-based panel method)을 사용하였다. 선박 형상의 변경은 가우시안형 수정함수법(Gaussian-type modification function method)를 개발하여 적용하였다. 개발된 소프트웨어를 사용하여 대상선박의 서로 다른 두 가지 선속에 대하여 설계를 수행하고 그 결과를 서로 비교하였다. 그리고 개발된 프로그램의 타당성을 검증하기 위하여 모형시험을 수행하여 구한 실험값과 수치해석을 수행하여 구한 계산값을 서로 비교하였다.

• 식물조직배양학회지
• /
• 제24권4호
• /
• pp.203-212
• /
• 1997

The impact of plant genetic engineering, a technology born in the early 1980's, is beginning to be felt across the world in the 1990's. The first wave of engineered plant produce are reaching consumers in the supermarket and many more are destined to follow Transformation technology now exists for most plant, including the four staple crops-maize, wheat, rice, and soybean. Early targets of genetic engineering include plane possessing insect resistance and herbicide tolerance, with future goals set on increasing harvestable yield, improving nutritional quality, and making specialty products. This review describes some of the milestones in plant biotechnology, the U.S. regulatory agencies, field trial numbers and deregulated plants, commercialization criteria, examples of commercialized plants, and future prospects of plant biotechnology.

• 대한조선학회지
• /
• 제21권3호
• /
• pp.19-26
• /
• 1984

Guilloton's wedge method is extended to evaluated velocity components on and around a ship hull. A ship is divided into a number of layers each of which is approximated by the superposition of so many wedges. These wedges start from the stations evenly placed along the length of the ship. The Michell potential is used to obtain the field generating properties of a wedge. The derivatives of this potential represent then the velocity components induced by the wedge. Superposition of velocities induced at a fixed field point by all the wedges placed at the appropriate positions to approximate the hull will result in the velocity associated with the ship at a particular speed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.100-114
• /
• 2015

This paper deploys optimization techniques to obtain the optimum hull form of KSUEZMAX at the conditions of full-load draft and design speed. The processes have been carried out using a RaPID-HOP program. The bow and the stern hull-forms are optimized separately without altering neither, and the resulting versions of the two are then combined. Objective functions are the minimum values of wave-making and viscous pressure resistance coefficients for the bow and stern. Parametric modification functions for the bow hull-form variation are SAC shape, section shape (U-V type, DLWL type), bulb shape (bulb height and size); and those for the stern are SAC and section shape (U-V type, DLWL type). WAVIS version 1.3 code is used for the potential and the viscous-flow solver. Prior to the optimization, a parametric study has been conducted to observe the effects of design parameters on the objective functions. SQP has been applied for the optimization algorithm. The model tests have been conducted at a towing tank to evaluate the resistance performance of the optimized hull-form. It has been noted that the optimized hull-form brings 2.4% and 6.8% reduction in total and residual resistance coefficients compared to those of the original hull-form. The propulsive efficiency increases by 2.0% and the delivered power is reduced 3.7%, whereas the propeller rotating speed increases slightly by 0.41 rpm.

• 대한조선학회지
• /
• 제2권1호
• /
• pp.9-14
• /
• 1965

Ship designers make every efforts to get faster ships in accordance with the development of the Naval Architecture. But for the speed lying over factor length ratio 2.5-3.0, we could put a powerful engine into the conventional round bottom displacement type vessels, but it is very difficult in view point of economy, weight and volume. The principal cause of these speed obstacles is the wave making resistance and researchers are trying to decrease this resistance. One of the resolving ways, planing hulls were applied to small high boats. Planing hull's advantage is not restricted to speed, but the workmanship of the planing hull is easier than those of displacement type vessels of round bottom. Planing hull, therefore, are widely applicable to the intermediate speed boats, which don't have enough high speed to take planing advantage, as well as high speed boats. We will discuss related phenomena of the planing hull in details and this paper we particularly interested in the interjection point(speed length ratio 3.0-3.5 by Mr. D. De Groots) between semi-planing and full planing hulls on the resistance characteristic curve. The paper by Prof. Keuck Chun Kim, "Some Characteristics of Straight Framed V-bottom Hull Forms", Journal of the society of Naval Architects of Korea, Vol.1, No.1, Dec.5, 1964, is referred to the V-bottom hull forms belonging to low speed region and determines practical applicable limit of the speed length ratio combined with construction costs, under which are still used by large commercial vessels. This is the interesting contrast between his and authors. We will further discuss the speed length ratio which is considered as a beginning point to planing effect. For this analysis, we choose 3 model ships: Model (1) and (2) have the same principal dimensions, model 3 varied dimension. Model (1) is full-planing hull, (2) is semi-planing hull and (3) is complete planing hull. They are aimed to collect proper design data for purposed ships.

• 산업진흥연구
• /
• 제9권1호
• /
• pp.189-202
• /
• 2024

지구상에 분포하고 있는 수맥 자체가 해로운 것이 아니라 수맥으로부터 발생하는 수맥 파가 인체 건강에 해롭다는 것이다. 지구의 고유진동수는 7.83Hz인데 깊은 잠을 자기 위해서는 이 진동수보다 낮은 델타파로 2~3.99Hz의 상태로 내려가야만 가장 깊은 잠을 잘 수 있어 건강을 유지할 수가 있다. 그렇지만 수맥 파가 있는 곳에서 잠을 자게 되면 수맥 파가 뇌파를 간섭하여 잠을 잘 자지 못하고, 악몽을 꾸기도 하고, 자고 일어나도 몸이 개운하지 못하고 피로가 다 풀리지 않아 쉽게 지치고 피곤함을 느끼게 된다. 이 같은 현상이 지속해서 이루어지다 보면 몸의 저항력이 떨어지고 면역력이 약해져서 결과적으로 병을 유발하는 원인이 될 수 있고, 각종 질병을 얻게 되어 건강을 해칠 수가 있다. 즉 수맥파로부터 가장 안전하고 간단히 대처할 수 있는 효과적인 방법은 수맥이 있는 곳은 피하고, 수맥이 없는 곳으로 잠자는 자리만 바꿔도 건강하고 행복한 생활을 할 수 있다는 것을 사례를 통해서 규명하고자 한다.