• 제목/요약/키워드: Wave field

검색결과 2,513건 처리시간 0.03초

Wave setup on beaches and in river entrances

  • Nielsen, Peter
    • 한국해안해양공학회:학술대회논문집
    • /
    • 한국해안해양공학회 1998년도 정기학술강연회 발표논문 초록집 Annual Meeting of Korean Society of Coastal and Ocean Engineers
    • /
    • pp.1-4
    • /
    • 1998
  • The prediction of wave setup is an important part of modelling coastal inundation and flooding in coastal rivers but there are still some gaps in our knowledge particularly with respect to the conditions in river entrances. One of the reasons that wave setup is still not fully understood, almost fifty years after it was first observed in the field and subsequently reported by Thorndike Saville (1961) and by Dorrestein (1961), is that it is difficult to measure accurately in the field. (omitted)

  • PDF

계류선박의 동요량을 고려한 하역한계파고 산정 방법에 관한 연구 (A Study on Estimation of Allowable Wave Height for Loading and Unloading of the Ship Considering Ship Motion)

  • 곽문수;문용호
    • 대한토목학회논문집
    • /
    • 제34권3호
    • /
    • pp.873-883
    • /
    • 2014
  • 본 연구는 선박의 크기, 계류상태, 파랑의 주기, 파향 등의 영향을 반영하여 계류선박의 동요량을 계산하고, 그 결과를 이용하여 선석 전면에서 하역한계파고를 산정하는 방법을 제시한 것이다. 여기서는 포항신항의 제 8부두에 본 방법을 적용하고 하역중단시 현지 파랑 관측자료와 비교하여 그 타당성을 검증하였다. 하역중단시 현지 선박의 크기는 800~35,000ton이었으며, 이 때 관측된 파랑은 파고 0.10~0.75m, 주기 7~13s이었다. 본 방법에 의한 하역한계파고는 5,000ton, 10,000ton, 30,000ton 선박에 대하여 파고 0.19~0.50m, 주기 8~12s로 계산되었으며, 본 방법은 파랑의 주기 변화 및 선박의 크기에 대응하여 하역중단시 현지 파랑 관측 결과를 잘 재현하였다. 한편 본 방법에 의한 하역한계파고는 선형 5,000~30,000ton, 주기 12s, 선박에 입사하는 파랑의 각도가 $75^{\circ}C$일 때, 설계기준의 하역한계파고에 비해서 장 단주기 파를 고려하면 16~62%, 단주기 파랑만 고려하면 0~46% 감소하였다. 또한 설계기준에 제시된 하역한계파고는 주기 변화 및 선형에 따라 대응하지 못하며, 10,000ton 이하의 선박에 대해서는 과대 평가되어 있음을 확인하였다.

Field investigations on port non-tranquility caused by infra-gravity water waves

  • Najafi-Jilani, A.;Rahimi-Maleki, D.
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제2권1호
    • /
    • pp.34-38
    • /
    • 2010
  • Field investigations have been carried out in two 60-day stages on the surf beat low frequency waves in Anzali port, one of the main commercial ports in Iran, located in southwest coast of the Caspian Sea. The characteristics of significant water waves were measured at three metering stations in the sea, one at the entrance of the port and three in the basin. The measured data were inspected to investigate the surf beat negative effects on the tranquility of the port. Using field measurements and complementary numerical modeling, the response of the basin to the infra-gravity long waves was inspected for a range of wave frequencies. It was concluded that the water surface fluctuations in the port is strongly related to the incident wave period. The long waves with periods of about 45s were recognized as the worst cases for water surfaceperturbation in the port. For wave periods higher than the mentioned range, the order of fluctuation was generally low.

파랑에 의한 해저지반의 액상화에 관한 현지관측과 해석 (Field Observation on Wave Induced Liquefaction in Sea-bed and its Analysis)

  • 이익효;선공기
    • 한국해안해양공학회지
    • /
    • 제3권2호
    • /
    • pp.100-107
    • /
    • 1991
  • 본 연구는 실제의 해역에서 액상화 현상을 확인함과 동시에 필자 등이 제안하는 액상화 이론을 검증하는 것을 목적으로 한다. 본 연구의 내용 파랑에 의한 액상화에 대한 현지관측 및 이론해석의 두 부분으로 되어있다. 현지관측에서는 2년간에 걸쳐서 파고, 해저지반표면의 수압변동, 해저지반중의 변동간극수압 등을 관측하였으며, 이론해석에서는 필자 등이 제안하고 있는 액상화 이론에 근거하여 해석을 실시한 후 현지관측 자료와 비교하여 검토하였다.

  • PDF

Reverberation 음장내 다수 소음원의 음파관을 이용한 소음 측정 방법 (The Noise Measurement Method of the Multi-Sound Source in Reverberation Field wiht Wave-Guide)

  • 이성태
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
    • /
    • pp.275-285
    • /
    • 1996
  • A noise measurement method of the multi-sound sources in a reverberation field with wave-guide is developed by experimental method. In the reverberation field, it is very hard to measure sound level or noise spectra of a certain sound source, when many sound sources generate noise simultaneously with a small space between them. Flexible wave-guide(tube) was used to measure noise level in a reverberation field. One end of the tube is attached to a sound source and the other end is closed with an anechoic terminal. Detailed method of the measurement and the source of error was considered as well.

  • PDF

Response of a rocksalt crystal to electromagnetic wave modeled by a multiscale field theory

  • Lei, Yajie;Lee, James D.;Zeng, Xiaowei
    • Interaction and multiscale mechanics
    • /
    • 제1권4호
    • /
    • pp.467-476
    • /
    • 2008
  • In this work, a nano-size rocksalt crystal (magnesium oxide) is considered as a continuous collection of unit cells, while each unit cell consists of discrete atoms; and modeled by a multiscale concurrent atomic/continuum field theory. The response of the crystal to an electromagnetic (EM) wave is studied. Finite element analysis is performed by solving the governing equations of the multiscale theory. Due to the applied EM field, the inhomogeneous motions of discrete atoms in the polarizable crystal give rise to the change of microstructure and the polarization wave. The relation between the natural frequency of this system and the driving frequency of the applied EM field is found and discussed.

Recent Progress of Freak Wave Prediction

  • Mori, Nobuhito;Janssen, Peter A.E.M.
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
    • /
    • pp.127-134
    • /
    • 2006
  • Based on a weakly non-Gaussian theory the occurrence probability of freak waves is formulated in terms of the number of waves in a time series and the surface elevation kurtosis. Finite kurtosis gives rise to a significant enhancement of freak wave generation in comparison with the linear narrow banded wave theory. For fixed number of waves, the estimated amplification ratio of freak wave occurrence due to the deviation from the Gaussian theory is 50% - 300%. The results of the theory are compared with laboratory and field data.

  • PDF

Higher-order Spectral Method for Regular and Irregular Wave Simulations

  • Oh, Seunghoon;Jung, Jae-Hwan;Cho, Seok-Kyu
    • 한국해양공학회지
    • /
    • 제34권6호
    • /
    • pp.406-418
    • /
    • 2020
  • In this study, a nonlinear wave simulation code is developed using a higher-order spectral (HOS) method. The HOS method is very efficient because it can determine the solution of the boundary value problem using fast Fourier transform (FFT) without matrix operation. Based on the HOS order, the vertical velocity of the free surface boundary was estimated and applied to the nonlinear free surface boundary condition. Time integration was carried out using the fourth order Runge-Kutta method, which is known to be stable for nonlinear free-surface problems. Numerical stability against the aliasing effect was guaranteed by using the zero-padding method. In addition to simulating the initial wave field distribution, a nonlinear adjusted region for wave generation and a damping region for wave absorption were introduced for wave generation simulation. To validate the developed simulation code, the adjusted simulation was carried out and its results were compared to the eighth order Stokes theory. Long-time simulations were carried out on the irregular wave field distribution, and nonlinear wave propagation characteristics were observed from the results of the simulations. Nonlinear adjusted and damping regions were introduced to implement a numerical wave tank that successfully generated nonlinear regular waves. According to the variation in the mean wave steepness, irregular wave simulations were carried out in the numerical wave tank. The simulation results indicated an increase in the nonlinear interaction between the wave components, which was numerically verified as the mean wave steepness. The results of this study demonstrate that the HOS method is an accurate and efficient method for predicting the nonlinear interaction between waves, which increases with wave steepness.

탄성계수 및 간극비 평가를 위한 현장 관입형 탄성파 및 전기비저항 프로브 (Field Elastic Wave and Electrical Resistivity Penetrometer for Evaluation of Elastic Moduli and Void Ratio)

  • 윤형구;김동휘;이우진;이종섭
    • 대한토목학회논문집
    • /
    • 제30권2C호
    • /
    • pp.85-93
    • /
    • 2010
  • 전단 강성은 지반 거동을 이해하기 위한 필수적인 요소로 인식되고 있으며, 특히 탄성계수 및 간극비는 구조물의 기본적인 설계 정수로서 그 중요성이 점차 증가하고 있다. 본 연구의 목적은 전단파와 압축파 같은 탄성파 및 전기비저항 측정이 가능한 현장 탄성파 및 전기비저항 측정 장비(FVRP)를 개발하고, 이를 이용하여 대상지반의 탄성계수 및 간극비를 산정하는 것이다. 압축파 및 전단파는 각각 피에조 디스크 엘리먼트와 벤더 엘리먼트를 이용하여 측정하였다. 그리고 전기비저항은 소형 전기비저항 측정 프로브를 제작하여FVRP 선단에 설치하여 측정하였다. 개발된 장비는 실내의 대형토조와 현장에 적용되었다. 대형 토조실험의 경우, 모래와 점토를 슬러리 상태에서 혼합하여 지반을 조성한 후 상재하중을 가하여 조성된 지반을 압밀 시킨 후 진행되었으며, 탄성파 및 전기비저항의 측정은 매 심도 1cm 간격으로 수행되었다. 현장 실험은 남해안 지역에서 수행되었으며, 탄성파 및 전기비저항 측정은 관입심도 6m부터 20m까지 10cm 간격으로 수행하였다. 토조 및 현장 실험을 통해 측정된 탄성파와 전기비저항은 이론적인 관계식을 이용하여 탄성계수 및 간극비로 환산되었다. 탄성파와 전기비저항을 이용한 간극비는 부피를 이용하여 산정한 간극비와 유사한 값을 나타내었다. 본 연구에서 개발된 탄성파와 전기비저항을 동시에 측정할 수 있는 FVRP는 연약지반의 탄성계수 및 간극비 산정에 유용한 장비가 될 수 있음을 보여준다.