• 한국해양공학회지
• /
• 제6권2호
• /
• pp.133-142
• /
• 1992

Beach evolution is of the most important problem is the coastal engineering. Especially, the structure construction through reclamation in the shallow water region nesar the beach will cause many severe problems around the structure. Beach evolution due to the construction of an artificial island in this study was studied using wave transform model and associated of an artificial island in this study was studied using wave transform model and associated sediment transport model. Numerical simulation of the model was applied to the Kwangan beach using the data of waves and shoreline of the area. The combined wave transform model and beach evolution model showed good results. The results show a breakwater will be needed to prevent severe erosion near the eastward Kwangan beach when construction an artificial island in the Suyong Bay. Good results of the study also suggest that the present model can be more widely applied to the prediction of beach evolution.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.437-440
• /
• 2003

As we know, roof is composed of heterogeneous rock. When roof fractures, a large amount of energy would be released in the form of seismic wave. How to identify the abnormal signal of seismic wave is a much difficult problem, there are many methods used usually, such as Fourier Transformation, filter technique etc., but abnormal signal can't be recognized accurately. In this paper, multi-resolution wavelet technique is used to identify the first and second variation point, based on the Lipschitz $\alpha$. A living example analysis shows, multi-resolution wavelet technique can identify the abnormal signal of seismic wave effectively in different scale, and the omen of roof fall can be grasped in order to forecast the roof fall accurately. It provides a new idea for the predication of catastrophe on rock mechanics and engineering.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.175-176
• /
• 1998

The automated ECG diagnostic systems that are used in hospitals have low performance of P wave detection when faced with some diseases such as conduction block. So, the aim of this study is the improvement of detection performance in conduction block which is low in P wave detection. Median QRS-T segments were subtracted from the raw data and residual in the QRS-T regions was zeroed. After band pass filtering, we applied approximated length transformation to detect P wave.

• 대한전자공학회논문지
• /
• 제23권2호
• /
• pp.149-169
• /
• 1986

Fundamentals of electrodynamics of moving sources with constant velocity in an anisotripic plasma when the do magnetic field and the relative motion are oriented in arbitrary directions are presented. The well-known Minkowski's relations are generalized to accomodate anisotropic and dispersive media, and relativistic transformation formulae of constitutive parameters are derived and expanded into polynomials of the speed ratio \ulcornerto increase the utility of the formulae. The helmholtz wave equation of electromagnetic fields is generalized to the media charactrized by tensor parameters, and is solved in operator form. Also the solution of wave equation is expressed as a porcuct of the inverse of the wave operator matrix and the source function vector, and the inverse of the wave operator matrix is presented in an explicit form. The equations and formulae derived in this paper are all general, and can be reduced to known and proven results upon imposing the restriction called for by specific situations.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1311-1317
• /
• 2008

In this paper, a fault location algorithm using wavelet transform is proposed for HVDC cable lines. The arriving instants of the first and second fault-induced backward travelling waves can be detected by using wavelet transform. The fault distance is estimated by using the time difference between the two instants of backward travelling waves and the velocity of the travelling wave. To distinguish between the backward wave from fault point and the backward wave from the remote end, polarities of backward waves are used. The proposed algorithm is verified varying with fault distances and fault resistances in underground cables of VSC(voltage source converter) HVDC system and CSC(Current Source Converter) HVDC respectively. Performance evaluations of the proposed algorithm shows that it has good ability for a fault location of HVDC cable faults.

• 한국항만학회지
• /
• 제8권1호
• /
• pp.41-47
• /
• 1994

The present paper discusses the nonlinear wave deformation due to a submerged coastal structure. Theory is based on the frequency-domain method using the third order perturbation and boundary integral method. Theoretical development to the second order perturbation and boundary integral method. Theoretical development to the second order Stokes wave for a bottom-seated submerged breakwater to the sea floor is newly expanded to the third order for a submerged coastal structure shown in Figure 1. Validity is demonstrated by comparing numerical results with the experimental ones of a rectangular air chamber structure, which has the same dimensions as that of this study. Nonlinear waves become larger and larger with wave propagation above the crown of the structure, and are transmitted to the onshore side of the structure. These characteristics are shown greatly as the increment of Ursell number on the structure. The total water profile depends largely on the phase lag among the first, second and third order component waves.

• 한국해안해양공학회지
• /
• 제13권4호
• /
• pp.296-308
• /
• 2001

Wei et al.의 완전비선형 Boussinesq방정식을 4차의 Adams predictorcorrector기법을 사용하여 차분하고 면 내부조파기법과 스폰지 경계충을 사용하였으며 쇄파구조를 추가하였다. 면 내부조파기법을 사용해 목적파를 잘 재현할 수 있었다. 비선형성이 부각되는 고립파의 천수실험을 통해 완전비선형 모형의 정화성을 확인할 수 있었고 해저평붕으로 인한 규칙파의 변형을 모의해 보았다. 쇄파 수치실험을 통해 적용된 쇄파구조의 특성을 확인해 보았고 수중천퇴에 대한 이차원 파랑전파 수치실험을 통해 비선형 모형의 중요성을 확인하였다.

• 한국해양공학회지
• /
• 제15권4호
• /
• pp.1-7
• /
• 2001

Mainly, Floating Breakwaters (FBs) have been constructed in many coastal regions due to the advantages of the coastal environment and construction cost. In general, the FB becomes fixed or its width broadened because the movement of the FB comes to be large and its the wave control function lower for the long period incident waves. This study discusses the wave control function of two-rowed Fixed Floating Breakwater (FFBs) that have narrower width than that of the one-rowed FFB by using numerical approach. Boundary Element Method (BEM) based on the Green formula and Eigenfunction Expansion Method (EEM) are applied to evaluate the three-dimensional wave transformation near the wave fields of two-rowed FFBs. The validity of the present study is confirmed by comparing it with the results of Ijima et al. (1974) and Yoshida et al. (1992) for the one-rowed Fixed Floating Structure. It is revealed that the wave control function of two-rowed FFBs is more effective than that of the one-rowed FFB.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.961-969
• /
• 2007

The laser material processing has replaced a conventional material processing such as a welding, cutting, drilling and surface modification and so on. LTH(Laser Transformation Hardening) is one branch of the laser surface modification process. A lot of energy is needed for the LTH process to elevate workpiece surface to temperature of the austenite transformation($A_3$), which results from utilizing a beam with a larger size and lower power intensity comparatively. The absorptivity of the laser energy with respect to material depends on the wave length of a beam. This study is related to the surface hardening for the rod-shaped carbon steel by the high power diode laser(HPDL) whose beam absorptivity is better than conventional types of lasers such as $CO_2$ or Nd:YAG laser. Because a beam proceeds on the rotating specimen the pretreated hardened-phase can be tempered and softened by the overlapping between hardened tracks. Accordingly, the longitudinal hardness measurement and observation of the micro structure was carried out for an assessment of the hardening characteristics. In addition, a hardening characteristics as a hardenability of materials was compared in the point of view of the hardness distribution and hardening depth and width.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.155-166
• /
• 1999

The construction of the coastal structures and reclamation work causes the circulation reduced in the semi-closed inner water area and the unbalanced sediment budget of beach results in an alteration of beach topography. Among the various fluid motions in the nearshore zone water particle motion due to wave and wave-induced currents are the most responsible for sediment movement. Therefore it is needed to predict the effect of the environmental change because of development and so the prediction of wave transformation dose. The purpose of this study is to introduce the relation between waves wave-induced currents and sediment movement. In this study we will show numerical method using energy conservation equation involving reflection diffraction and reflection and the surfzone energy dissipation term due to wave breaking is included in the basic equation. For the wave-induced current the momentum equation was combined with radiation stresses lateral mixing and friction Various information is required in the prediction of wave-induced current depending on the prediction tool. We can predict changes in wave-induced current from the distribution of wave especially near the wave breaking zone. To evaluate these quantities we have to know the local condition of waves mean sea level and so on. The results from the wave field and wave-induced current field deformation models are used as input data of the sediment transport and bottom change model. Numerical model were established by a finite difference method then were applied to the development plan of the eastern Pusan coastal zone Yeonhwa-ri and Daebyun fishing port. We represented the result with 2-D graphics and made comparison between before and after development.