• 한국항만학회지
• /
• 제4권1호
• /
• pp.21-31
• /
• 1990

The application of computer model to the port and harbor development is categorized in the field of port development policy, economic analysis and evaluation, civil engineering analysis, hydrodynamic analysis, evaluation of social and natural environment effect, etc. The study in this paper, however, is limited to hydrodynamic analysis, especially the analysis of water wave propagation and response to the shore structure due to the construction and implementation of shore boundary, the mathematical formulation of the numerical model is established systematically based on the hybrid Element Method and applied to solving the wave refraction, diffraction and radiation problems for a circular basin, the artificial beach or lagoon in terms of coastal zone development.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2021년도 제63차 동계학술대회논문집 29권1호
• /
• pp.269-271
• /
• 2021

본 논문에서는 실제 현실에서 표현되는 소리의 특징인 파동(Sound wave)과 흐름(Sound flow) 그리고 회절(Diffraction of sound)을 가상환경에서 실시간으로 표현할 수 있는 방법을 제안한다. 우리의 접근 방식은 소리가 재생되는 위치로부터 장애물 여부를 판단하고, 장애물이 존재할 시, 장애물로 인해 반사와 회절된 새로운 소리 위치를 계산한다. 이 과정에서 레이트레이싱 기반으로 장애물과의 충돌 여부를 판단하고, 충돌에 의해 굴절된 벡터를 이용하여 장애물 너머에서 들리는 소리의 크기를 계산하며, 충돌된 레이의 개수에 따라 소리의 크기를 감쇠시킨다. 본 논문에서 제안하는 방법을 이용한 소리의 회절은 물리 기반 접근법에서 나타나는 회절 형태를 실시간으로 표현했으며, 장애물에 따라서 회절 패턴이 변경되고, 이에 따라 소리의 크기가 자연스럽게 조절되는 결과를 보여준다. 이 같은 실험은 실제 현실에서 나타나는 소리의 퍼짐과 같은 특징을 거의 유사하게 복원해냈다.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1070-1077
• /
• 2011

This study intends to assess the defect in the weld zone of titanium grade 2 plate in terms of acoustical anisotropy based on the angle beam method. Depending on the rolling direction, the ratio of wave velocity was found to be 1.08 and the difference in the angle of refraction was more than seven degrees, confirming the presence of acoustical anisotropy. Thus for measuring the length of defect in the weld zone of the titanium plate (thickness of 10mm), the distance amplitude characteristics curves of titanium, TDACC-R and TDACC-T were constructed for the measurements in consideration of the acoustical anisotropy on CRT of the ultrasonic testing equipment. As a result, when the distance amplitude characteristics curve corresponds to the rolling direction, the length of defect was close to the actual measurement within 1mm and when different, the difference was found to be over 4mm. It was affirmed that the acoustical anisotropy should be taken into consideration when measuring the length of defects in the weld zone of the titanium plate with the presence of acoustical anisotropy.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.577-584
• /
• 2000

Seismic refraction survey was peformed for 10 lines along NE-SW and NW-SE directions above Nampoong gallery at Makyo-ri, Dogye, Samcheok, Kangwon-do. 48 geophones were laid in line with the interval of 1m, and a 5Kg hammer was used as a source at 5 points for each line. Data processing was done using reciprocal time method, GRM, and traveltime tomography which utilizes wavefront expansion method for forward process and SIRT for inversion. The result shows that the first layer has its lower boundary between 3.49m and 8.88m. The P-wave velocity of the first and the second layer were estimated as 270 360m/s and 1550 1940m/s respectively. When the boundary of the first and second layer is smooth enough and the velocity difference is large enough, GRM has little advantage over reciprocal time method. The result of reciprocal method and traveltime tomography shows consistency. The northeast part of the boundary has syncline structure, which is similar to the topography above. This implies that the collapse of the cavities of Nampoong gallery result in the subsidence of the ground surface. The subsidence is in progress across the Youngdong railroad, therefore a proper reinforcement work is required.

• Journal of the Optical Society of Korea
• /
• 제17권3호
• /
• pp.262-268
• /
• 2013

We study the focusing properties of a two-dimensional square-lattice photonic crystal (PC) comprising silica and germanium partitioned cylinders in air background. The finite difference time domain (FDTD) method with periodic boundary condition is utilized to calculate the dispersion band diagram and the FDTD method incorporating the perfectly matched layer boundary condition is employed to simulate the image formation. In contrast to the common square PCs in which the negative refraction effect occurs in the first photonic band without negative phase propagation, in our suggested model system, the frequency with negative refraction exists in the second band and in near-infrared region. In this case, the wave propagates with a negative phase velocity and the evanescent waves can be supported. We also discuss the dependency of the image resolution and its location on surface termination, source location, and slab thickness. According to the simulation results, spatial resolution of the proposed PC lens is below the radiation wavelength.

• 터널과지하공간
• /
• 제17권2호
• /
• pp.102-108
• /
• 2007

일반적으로 암판정을 수행하기 인해 가장 널리 사용되는 방법은 암석의 강도와 절리의 발달빈도를 고려하는 것이다. 하지만 미세균열과 연장성이 긴 절리들이 암반에 존재하고 있는 경우에는 이러한 방법이 합리적이지 않다. 그러므로 복잡한 지질조건을 가지고 있는 암반에서의 굴착난이도 결정은 절리빈도와 실내시험(일축압축강도, 점하중강도, 실내탄성파속도 등)과 현장탄성파속도와의 상관관계를 종합하여 암판정을 수행하는 것이 더욱 더 합리적이라고 판단된다.

• Structural Engineering and Mechanics
• /
• 제85권3호
• /
• pp.305-314
• /
• 2023

The article is about the theoretical analysis of the transmission and reflection of elastic waves through the interface of perfectly connected materials. The solid continuum mediums considered are piezoelectric semiconductors and transversely isotropic in nature. The connection among the mediums is considered in such a way that it holds the continuity property of field variables at the interface. The concept of strain and stress introduced by non-local theory is also being involved to make the study more applicable It is found that, the incident wave results in the generation of four reflected and three transmitted waves including the thermal and elastic waves. The thermal waves generated in the medium are encountered by using the concept of three phase lag heat model along with fractional ordered time thermoelasticity. The results obtained are calculated graphically for a ZnO material with piezoelectric semiconductor properties for medium M₁ and CdSc material with transversely isotropic elastic properties for medium M₂. The influence of fractional order parameter, non-local parameter, and steady carrier density parameter on the amplitude ratios of reflected and refraction waves are studied graphically by MATLAB.

• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.93-101
• /
• 2006

이 연구에서는 유전자 알고리듬을 이용하여 수진기 함수와 표면파 위상 속도로부터 심부 퇴적층의 전단파 속도 구조를 결정하는 복합역산 방법을 제시하였다. 합성 탄성파 자료를 이용한 수치모형실험은 제시된 방법이 단지 수진기 함수만을 역산했을 때 발생하는 전단파 속도와 층 두께 사이의 trade-off와, 표면파 위상 속도만을 역산했을 때 심부구조에서의 불확실성을 피할 수 있음을 보여주고 있다 이 방법은 진앙거리 100km의 지진기록으로부터 얻은 수진기 함수들과 일본 Kanto 평원의 상시진동 배열 탐사로부터 얻은 레일리파의 위상속도에 적용되었으며, 추정된 심부구조는 선행된 굴절법 탐사 결과 및 심부 시추공 자료와 잘 일치하였다.

• 한국해안해양공학회지
• /
• 제1권1호
• /
• pp.22-30
• /
• 1989

파랑은 천해역을 진행하면서 천수효과에 의한 굴절 및 구조물에 의한 회절, 흐름의 영향, 반사등에 의한 변형을 일으킨다. 굴절 및 회절에 의한 파랑변형을 예측하기 위하여 흐름이 고려된 비정상 상태의 Kirby(1986a)의 식을 이용하여 회절이 고려된 기초방정식을 유도하고, 좌표계를 파향선식에 의한 직교곡선 좌표계로 변환한 후 양해법으로 반복계산을 행하여 해를 구하는 수치 모형을 개발하였다. 수치 모형의 적용성을 검토하기 위하여 다음과 같은 조건에서 계산하였으며, 기존의 계산결과 및 실험결과와 비교 검토하였다. 1) 일정 수심상에서 원형 천퇴 주변의 파랑변형 2) 사면상에서 타원형 천퇴 주변의 파랑변형 3) 사면상에서 파랑이 입사각을 갖고 입사할 경우 구조물 주변의 파랑변형 본 모형의 수치해를 검토한 결과 기존의 연구결과와 잘 일치하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.109-116
• /
• 2000

Rippability refers to the ease of excavation by construction equipment. Since it is related to rock quality in terms of hardness and fracture density, which may be measured by seismic refraction surveys, correlations have been made between rippability and seismic P wave velocities. The 1-channel signal enhancement seismograph(Bison, Model 1570C) was used to measure travel time of the seismic wave through the ground, from the source to the receiver. The seismic velocity measurement was conducted with 153 lines at 5 rock slopes of Chungbuk Youngdong area. Schmidt rebound hardness test were conducted with 161 points on rock masses and the point load test also on 284 rock samples. The uniaxial compressive strength and seismic wave velocity of 60 rock specimens were measured in laboratory. These data were used to evaluate the rock quality of 5 rock slopes.