• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.567-573
• /
• 2006

An efficient typhoon wave-generating model is applied to northeast Asia sea zone presented that can be used by civil defense agencies for real-time prediction and fast warnings on typhoon-generated wind wave and storm surge. Instead of using commercialized wave models such as WAM, SWAN, the wind waves are simulated by using a new concept of wavelength modulation to enhance broader application of the hyperbolic wave model of the mild-slope equation type. The results simulated along the Korean coasts during Typhoon Nabi (2005) showed reasonable agreement with the recorded wind waves.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.91-98
• /
• 2000

The three-dimensional unsteady compressible Full Navier-Stokes equation solver with sliding multi-block method has been applied to analyze three dimensional characteristics of the flow field and compression wave around the high speed train which Is entering into a tunnel. The numerical scheme of AF + ADI was used to efficiently solve Navier-Stokes equations in the curvilinear coordinate system. The vortex formation around the nose region was found and the generation of compression wave due to the blockage effects was observed ahead of the train in the form of plane wave. The three dimensional characteristics of the flow field compared to the analytic results were discussed in detail. The variation of pressure of tunnel wall surface and velocity profile of the train are identified as the train enters into a tunnel. The changes in aerodynamic forces and streamlines of each specific sections are also discussed and presented.

• 한국해안해양공학회지
• /
• 제5권4호
• /
• pp.350-356
• /
• 1993

본 연구에서는 천수역 비선형 방정식인 Boussinesq 방정식을 방파제에 의한 산란문제에 적용하였다. 방파제에 의한 파랑변형을 수치계산하기 위하여 경계치문제는 유한요소법을 사용하였고 시간에 따른 진행은 Runge-Kutta 방법을 사용하였다. 수치모델로 2차원 수로에 입사파의 진행방향과 수직으로 방파제가 놓여있는 경우를 생각하였으며 방파제의 길이와 두께변화에 따른 파랑변형에 미치는 영향을 살펴보았다. 또한 후류 경계면이 막혀있는 경우와 열려있는 경우를 고려하였으며 선형결과와 비선형결과의 차이를 살펴보았다.

• 호남수학학술지
• /
• 제35권4호
• /
• pp.683-699
• /
• 2013

In this paper, an improved ($\frac{G^{\prime}}{G}$)-expansion method is proposed for obtaining travelling wave solutions of nonlinear evolution equations. The proposed technique called ($\frac{F}{G}$)-expansion method is more powerful than the method ($\frac{G^{\prime}}{G}$)-expansion method. The efficiency of the method is demonstrated on a variety of nonlinear partial differential equations such as KdV equation, mKd equation and Boussinesq equations. As a result, more travelling wave solutions are obtained including not only all the known solutions but also the computation burden is greatly decreased compared with the existing method. The travelling wave solutions are expressed by the hyperbolic functions and the trigonometric functions. The result reveals that the proposed method is simple and effective, and can be used for many other nonlinear evolutions equations arising in mathematical physics.

• 대한전자공학회논문지
• /
• 제23권2호
• /
• pp.149-169
• /
• 1986

Fundamentals of electrodynamics of moving sources with constant velocity in an anisotripic plasma when the do magnetic field and the relative motion are oriented in arbitrary directions are presented. The well-known Minkowski's relations are generalized to accomodate anisotropic and dispersive media, and relativistic transformation formulae of constitutive parameters are derived and expanded into polynomials of the speed ratio \ulcornerto increase the utility of the formulae. The helmholtz wave equation of electromagnetic fields is generalized to the media charactrized by tensor parameters, and is solved in operator form. Also the solution of wave equation is expressed as a porcuct of the inverse of the wave operator matrix and the source function vector, and the inverse of the wave operator matrix is presented in an explicit form. The equations and formulae derived in this paper are all general, and can be reduced to known and proven results upon imposing the restriction called for by specific situations.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.565-572
• /
• 2004

Numerical stability analysis of one-dimensional axial flow in solid rocket motors is performed based on the Euler equation coupled with an unsteady combustion equation of solid propellant. In order to check the numerical scheme, behavior of a standing wave in a closed tube is examined. A standing wave in solid rocket motor decays or grows depending on the total effect of propellant combustion, nozzle flow, and so on. The stability boundary of the fundamental mode standing wave is determined by changing one of the combustion parameters. In addition growth rates of the wave are calculated numerically in relatively low Mach number flow region for the motors with different port and nozzle throat diameters. The results obtained here agree well with the approximate solution. The same scheme is applied to a motor with shorter length and L＊-instability is observed.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.174-180
• /
• 2002

A virtual reality technology for multipurpose numerical simulation is developed to reproduce and investigate a variety of ocean environmental problems in a 3D-Numerical Wave Tank. The governing equations for solving incompressible fluid motion are Navier-Stokes equation and continuity equation, and the Marker-Density function technique is adopted to implement the fully-nonlinear free-surface kinematic condition. The marine environmental situations, i.e. waves, currents, wind, etc., are reproduced by use of multi-segmented wavemaker on the basis of the so-called "snake-principle". In this paper, some numerical reproduction techniques for regular and irregular waves, multi-directional waves, Bull's-eye wave, wave-current, and solitary wave are presented, and a model test in motion with large amplitude of roll angle is conducted in the developed 3D-NWT, using a overlaid grid system.

• 한국항만학회지
• /
• 제7권1호
• /
• pp.79-88
• /
• 1993

This study deals with the case of a fixed floating structure(FFS) at the mouth of a rectangular harbor under the action of waves represented by the linear wave theory. Modified forms of the mild-slope equation is applied to the propagation of regular wave over constant water depth. The model is extended to include bottom friction and boundary absorption. A hybrid element approximation is used for calculation of linear wave oscillation in and near coastal harbor. Modification of the model was necessary for the FFS. For the conditions tested, the results of laboratory experiments by Ippen and Goda(1963), and Lee (1969) are compared with the calculated one from this model. The cases of flat cylinderical structures, both fixed and floating, were taken to be in an intermediate water depth.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1269-1278
• /
• 2018

Using the thawed Gaussian wave packets [E. J. Heller, J. Chem. Phys. 62, 1544 (1975)] and the adaptive reinitialization technique employing the frame operator [L. M. Andersson et al., J. Phys. A: Math. Gen. 35, 7787 (2002)], a trajectory-based Gaussian wave packet method is introduced that can be applied to scattering and time-dependent problems. This method does not require either the numerical multidimensional integrals for potential operators or the inversion of nearly-singular matrices representing the overlap of overcomplete Gaussian basis functions. We demonstrate a possibility that the method can be a promising candidate for the time-dependent $Schr{\ddot{o}}dinger$ equation solver by applying to tunneling, high-order harmonic generation, and above-threshold ionization problems in one-dimensional model systems. Although the efficiency of the method is confirmed in one-dimensional systems, it can be easily extended to higher dimensional systems.

• Coupled systems mechanics
• /
• 제12권4호
• /
• pp.337-364
• /
• 2023

The Rayleigh wave propagation is considered in the structure of the functionally graded piezoelectric material (FGPM) layer over the elastic substrate. The elastic substrate loosely bonds the layer through a corrugated interface, whereas its upper boundary is also corrugated but stress-free. Additionally, the solutions for the FGPM layer and substrate are derived using the fundamental variable separable approach to convert the partial differential equation to an ordinary differential equation. The results with boundary conditions lead to dispersion relations for the electrically open and electrically short cases in the determinant form. The outcomes have been numerically analyzed using a specific model. The findings were presented in the form of graphs, which were created using Mathematica 7. Graphs are plotted for variations in wavenumber and phase velocity. The outcomes may help measure interface defects and design Surface Acoustic Wave (SAW) devices.