• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.10-10
• /
• 1998

천음속 익형에서 발생하는 응축충격파와 경계층의 간섭을 피동제어 하여 항력감소에 대한 연구를 2.5$\times$7$\textrm{cm}^2$ 천음속 풍동에서 수행하였다. 익형표면에 설치한 정압공으로 정압을, 익형후방에 설치한 8개의 Pitot probe로 전압을 동시에 측정하여 충격파를 통한 에너지의 손실과 항력의 변화를 계산하였고, 또한 유동장과 충격파의 형상을 가시화하기 위해 슈리렌 가시화 시스템을 사용하였다. 실험은 NACA 0012 익형에서 기공률 변화에 따른 피동제어의 항력감소 초과를 조사한 다음 NACA 64-018 익형에서는 기공률과 공동의 크기의 변화가 미치는 효과를 연구하였다. 피동제어의 개념은 충격파가 발생하는 하부벽을 다공벽으로 만들고 그 아래를 공동으로 만들면 충격파 후방의 상대적으로 높은 압력이 기류의 일부를 공동으로 자연스럽게 유입시키고 다시 공동에서 낮은 압력의 충격파 상류로 유출시키는 것이다.

• 연구논문집
• /
• s.27
• /
• pp.15-34
• /
• 1997

The 3-dimensional unsteady compressible flows around the high speed train have been simulated for the train entering a tunnel and for passing another train. The simulation method employs the implicit approximation-factorization finite difference algorithm for the inviscid Euler equations in general curvilinear coordinates. A moving grid scheme is applied in order to resolve the train movement relative to the tunnel and the other train. The velo-city and pressure fields and pressure drag are calculated to study the effects of tunnel and the other train. The side directional force which is time dependent is also computed for the passing train. Pressure distribution shows that the compression wave is generated in front of the train noise just after the tunnel entrance and proceeds along the inside of tunnel.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.491-496
• /
• 2000

The physics of the flow field surrounding an engine nacelle afterbody is very complex. A high pressure jet from the nozzle interacts with the external flow and causes upstream influence on the afterbody surface field. At certain conditions, the nozzle boundary layer can separate, either by shock wave interaction or by adverse pressure gradient effect, resulting in a severe drag penalty. Furthermore, a finite afterbody base implies a recirculating flow region. A flow modeling method has been developed to analyze the flow in the annular base(rear-facing surface) of a circular engine nacelle flying at subsonic speed but with a supersonic exhause jet. Real values of exhaust gas properties and temperature are included.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1835-1842
• /
• 2007

The purpose of this paper describes the changes of TGV & ICE series' nose shape by increasing train speed and according to the periodical characteristics. As the speed increases, the length of the nose shape trends to lengthen longer. But the nose shape length does not increase as speed improves by optimized nose shape to reduce aerodynamic drag and micro-pressure wave in tunnels. TGV & ICE series' nose shape can be classified into Advanced paraboloid type, Shape-nosed type, Organic double-edged type and Flat-nosed type by the advance research(the changes of Shinkansen vehicle' nose shape) of high speed railway. Because it trends to be diversified and characterized more and more. This paper analyzed and introduced as TGV & ICE series' nose shape by top 2 nation (Germany, France) and high speed railway in the past years(1980-2007) for their railway design trends by new positioning(Advance research).

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.622-625
• /
• 2008

While the research for flow over a circular cylinder has been actively carried out up to the present, it has been known that the flow has not been clarified even now. Various complex flow and aero-acoustic characteristics exist around a circular cylinder such as flow separation, wake and pressure wave propagation. In this paper, research was carried out for wake flow and aeroacoustics over a circular cylinders by using high order, high resolution techniques that are used in two dimensional aero- acoustic analysis. OpenMP parallel processing method was used. For the numerical result, the periodic characteristic of Strouhal Number due to vortex shedding was comparatively analyzed with other experiment values and two dimensional numerical results.

• 연구논문집
• /
• s.25
• /
• pp.13-22
• /
• 1995

At the running speed higher than 250 km/h, several aerodynamic problems such as the increase of aerodynamic resistance, aerodynamic noise, pressure fluctuation at the tunnel entry, impulsive wave at the tunnel exit bring about the power consumption, deterioration of riding quality, and severe environmental noise. To solve these aerodynamic problems, the flow phenomena around the high speed train have to be analyzed in detail. In this study, the flow around the train is modelled as the 2-dimensional viscous compressible flow and the flow field is calculated numerically for the three different types of geometry and running speed. The aerodynamic drag coefficient and the pressure coefficient are evaluated each case.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.37-40
• /
• 2012

EDISON CFD 수치 해법 기법을 바탕으로 초음속 유동장 속에서 spike가 부착된 무딘 물체에 대하여, spike 형상 변화에 따른 압축성 효과에 의한 항력 변화 추이를 고찰하였다. Spike의 길이 따른 항력 변화 추이를 살펴보았다. Spike의 길이가 Main body와 특정한 비율을 가질 때 항력이 최소가 된다. 이를 기준으로 spike 길이가 특정 길이만큼 줄어들거나 늘어날 경우에 각각 1.35%, 4.95% 항력이 증가하였다. 이러한 자료들은 초음속 유동장에서 무딘 물체에 가해지는 압축성 효과에 의한 저항을 최소화하기 위한 spike 설계 시 중요한 견해를 제공한다.

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.1
• /
• pp.45-52
• /
• 2003

A three-dimensional aerodynamic shape optimization technique in inviscid compressible flows is developed by using a parallel continuous adjoint formulation on unstructured meshes. A new surface mesh modification method is proposed to overcome difficulties related to patch-level remeshing for unstructured meshes, and the effect of design sections on aerodynamic shape optimization is examined. Applications are made to three-dimensional wave drag minimization problems including an ONERA M6 wing and the EGLIN wing-pylon-store configuration. The results show that the present method is robust and highly efficient for the shape optimization of aerodynamic configurations, independent of the number of design variables used.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.94-100
• /
• 2005

This paper describes the changes of Shinkansen vehicles' nose shape by increasing train speed and according to the stream of time. As the speed increases, the length of the nose trends to lengthen longer. But the nose length does not increase as speed improves by optimized nose shape to reduce aerodynamic drag and micro-pressure wave in tunnels. Shinkansen vehicles nose shape can be classified into Advanced paraboloid type, Sharp-nosed type, Organic double-edged type and Flat-nosed type. In addition, it trends to be diversified and characterized more and more. In the near future, nose designs will be emphasized by the design concept including identity of each JR company based on optimized aerodynamic shape.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.331-334
• /
• 2010

The supersonic speeds slowing down by shock waves is a common problem during the transonic region. So how to study the status of shock on the surface of airplane and wings is crucial adjective during transonic region. However, the theoretical and computational transonic flow problems were very hard. This paper introduced using Navier-Stokes Schemes to study characteristics of AGARD Wing 445.6 by ANSYS CFX in transonic region. From simulations results, as the Mach number increases, shock waves appear in the flowfield, getting stronger as the speed increases, these shock waves will lead to a rapid increase in drag.