• Journal of Advanced Marine Engineering and Technology
• /
• 제41권3호
• /
• pp.197-201
• /
• 2017

대부분의 어선에서는 포획된 어류를 관리하고 저장하기 위해 얼음 냉각 시스템을 사용한다. 그러나 얼음 냉각 시스템은 작동 시간의 제한뿐만 아니라 적절한 온도와 염분 농도를 유지하는 것이 어려운 단점이 있다. 본 연구의 목적은 어류 운반선의 어창에 적정한 해수온도 유지를 위한 해수 냉각 시스템용 만액식 증발 열전달 특성을 파악하는데 있다. 실험은 냉매의 해수 온도, 유량 및 포화 온도의 변화를 주며 열전달 특성을 파악하였다. 동일 열유속에서 Aluminium-Brass tube가 Copper-Nickel tube 보다 외측 열전달계수가 약 10% 큰 것으로 확인할 수 있었으며, 이를 통해 해수용 열교환기의 전열관으로 Aluminium-Brass를 적용하는 것이 열전달 측면에서 효과적일 것을 확인할 수 있었다. 만액식 단관 열전달계수와 18 kW급 만액식 해수냉각시스템의 총괄열전달계수의 비교를 통해 동일 조건에서는 25%정도 단관의 열전달계수가 큰 값을 나타내었으며, 이러한 결과는 만액식 관군 열교환기의 설계를 위한 중요한 자료가 되리라 판단된다.

• Korean Chemical Engineering Research
• /
• 제55권5호
• /
• pp.704-710
• /
• 2017

가스 하이드레이트 형성원리를 이용한 해수담수화는 이미 상용화된 역삼투 방식에 비하여 아직 실증화 단계이지만 그 공정이 비교적 단순하고 특히 냉매를 객체가스로 사용할 경우 아주 낮은 공정 온도가 필요하지 않아 에너지 소비량(thermal budget)이 향상될 가능성이 있기 때문에 여전히 많은 관심을 받고 있다. 따라서 본 연구에서는 수소불화탄소(HFC, hydrofluorocarbon) 및 수소염화불화탄소(HCFC, hydrochlorofluorocarbon) 계열의 냉매들을 객체가스로 한 가스 하이드레이트 형성 거동을 에너지적인 관점에서 해석하고자 하였고 이를 위해 밀도 범함수(DFT, density functional method) 이론을 기반으로 한 분자모델링을 도입하였다. 객체가스(guest gas)로 R-134a, R-227ea, R-236fa, R-141b를 선정하였으며 계산을 위하여 물 분자로 이루어진 $5^{12}$, $5^{12}6^2$, $5^{12}6^4$의 세가지 구조의 동공들(cavities)을 구성하였다. 동공, 객체가스, 그리고 객체가스가 삽입된 동공의 구조를 분자모델링을 이용하여 각각 최적화하였고 계산된 각 구조의 에너지로부터 동공과 객체가스의 결합에너지(binding energy)를 계산하였다. 마지막으로 결합에너지를 비교함으로써 어느 냉매가 가장 유리한 조건에서 가스하이드레이트를 형성할 지를 판단하였다. 결과적으로 R-236fa가 가장 자발적(spontaneous)으로 가스 하이드레이트를 형성할 것으로 예상되었고 사람에 대한 낮은 독성과 물에 대한 작은 용해도 측면에서도 가장 적절한 선택으로 평가되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권3호
• /
• pp.152-156
• /
• 2016

폐수 열원 히트펌프 시스템은 목욕탕, 공장 또는 하천수 등을 히트펌프의 열원으로 사용한다. 증발기는 폐수로부터의 오염을 완화시키기 위하여 휜이 없는 나관식(bare tube) 열교환기가 주로 사용되고 있다. 대부분의 열 저항은 관외를 흐르는 폐수측에 생성되는 파울링에 의한 것이며, 히트펌프의 성능을 급격하게 감소시킨다. 따라서 본 연구에서는 나관식 열교환기 하부에서 버블 유동층을 형성시키고 세정 볼을 사용하여 관 외측의 파울링을 저감시키는 장치를 개발하였다. 실험 조건으로, 냉수온도 $20^{\circ}C$, 폐수 온도 $40^{\circ}C$, 관 내측 유량 100L/h, 수조 내 물의 양 50L, 열교환기 면적 $0.161m^2$ 이다. 실험결과 세정 볼 없이 버블유동층만 형성한 경우에는 버블유동층이 없는 경우에 비해 파울링에 의해 생성된 열 저항이 약 56% 감소되었으며, 세정 볼의 개수 밀도가 8,000(Number of $ball/m^3$) 일 때, 파울링에 의해 생성된 열 저항은 버블유동층 및 세정 볼이 없을 때와 비교하여 약 86% 감소되었다.

• 공업화학
• /
• 제29권4호
• /
• pp.479-483
• /
• 2018

본 연구진은 선행 연구를 통하여 R-22 ($CHClF_2$) 폐냉매를 질소 열플라즈마 시스템을 이용하여 열분해공정에 관하여 보고한 바 있다. 하지만 해당 공정에서 열분해를 거쳐 발생된 폐수 중 불소이온이 고농도로 존재한다는 문제점이 제기되었다. 본 연구는 폐수 중 불소 이온을 중화하기 위한 추가 후단처리 공정에 관한 연구이다. 선행 연구와 동일한 공정을 통해 R-22의 열분해를 수행하여 발생한 폐수를 대기압 플라즈마를 이용하여 처리하였으며, 이를 물과 중화제인 $Ca(OH)_2$ 용액으로 후단 처리한 것과 비교하여 폐수 중 $F^-$ 이온의 농도 변화를 확인하였다. 물만 사용하여 중화한 경우 폐수 중 불소이온 농도가 가장 높았으며 중화액을 살포하거나 대기압 플라즈마로 추가로 후처리를 수행한 경우 폐수 중 불소이온 농도가 현저하게 감소하는 것이 확인되었다.

• 한국터널지하공간학회 논문집
• /
• 제21권1호
• /
• pp.31-48
• /
• 2019

인공동결공법(artificial ground freezing method)은 연약지반 및 도심지에서의 지하구조물 시공에 적합한 차수 및 지반보강 공법이다. 인공동결공법은 동결관(freezing pipe)을 지중에 매설한 후 냉매(refregerant)를 순환시켜 대상 지반에 차수벽 및 지지체의 역할을 수행하는 동결벽체(frozen wall)를 형성한다. 그러나 간극수의 동결에 따른 간극수의 부피팽창은 지반의 변형을 야기시킬 수 있고, 시공완료 후 동결토의 융해에 따른 지반의 소성변형 및 입자의 재배치 등은 지반의 역학적 특성을 변화시킨다. 본 논문에서는 인공동결공법에 따른 해성 점토지반(marine clay)의 동결속도를 평가하기 위하여 인공동결공법 현장실증시험을 수행하였다. 현장실증시험은 지중에 3.2 m 깊이로 매설된 동결관 1공 내로 초저온 냉매인 액화질소를 순환시키는 방법으로 수행되었다. 또한, 원지반과 인공동결공법에 의해 동결/융해된 지반에 대한 피에조 콘 관입시험(piezo cone penetration test, CPTu) 및 공내재하시험(lateral load test, LLT)을 수행함으로써 동결/융해(freezing-thawing)에 따른 해성 점토지반의 강도 및 강성 특성의 변화를 평가하였다. 시험결과, 부피가 약 $2.12m^3$인 원기둥 모양의 동결체를 형성하는데 총 3.5일이 동안 약 11.9 ton의 액화질소가 소요되었다. 동결/융해에 따른 지반의 강도 및 강성 저하는 각각 48.5%, 22.7%로 산정되었다.

• 설비공학논문집
• /
• 제22권7호
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• 수산해양교육연구
• /
• 제5권1호
• /
• pp.31-44
• /
• 1993

Through the early 1900's, the evolution of the surface condenser was closely tied to the development of steam engine and the turbine. As the chemical and petroleum industries evolved in the 1900's, the use of surface condensers in many different processes. Today, industry uses condensers in many shapes and sizes. The actual condensation process occurs on the outside surface of tubes. The nature of this surface geometry affects the condenser's heat transfer performance. The first condensers were built with plain tubes. As tube manufacturing techniques advanced, manufacturers started making tubes with integral fins. In the 1940's, fin densities were limited to about 600 to 700 fins per meter(fpm) because of manufacturing procedure. Today new manufacturing techniques allow production of tubes with fin densities ranging from 750 to 1600 fpm. The integral-fin tubes investigated in this paper are nominally 19 mm diameter. Eight tubes have been used with trapezodially shaped integral-fins having fin density from 748 to 1654 fpm and 10, 30 grooves. For comparison, tests are made using a plain tube having the same inside diameter and an outside diameter equal to that at the root of the fins for the finned tubes. Betty and Katz's theoretical modelis is used to predict the R-11 condensation coefficient on horizontal integral-fin tubes having 748, 1024 and 1299 fpm. Experiments are carried out using R-11 as working fluid. The refrigerant condensates at a saturation state of $30^{\circ}C$ on the outside tube surface cooled by coolant. The amount of noncondensable gases present in the test loop is reduced to a negligible value by repeated purging. For a given heat input to the boiler and given cooling water flow rate, all test data are taken at steady state. The observed heat transfer enhancement for the finned and grooved tubes significantly exceeded that to be expected on grounds of increased area. For the eight fin tubes and one plain tube tested, the best performance has been obtained with a tube having a fin density of 1299 fpm, and a fin bight of 1.2mm and 30 grooves.

• 에너지공학
• /
• 제26권3호
• /
• pp.105-112
• /
• 2017

우리는 원자력발전시스템에서부터 상수도까지 많은 배관시스템을 사용하고 있다. 그리고 이들 배관시스템의 적절한 운용을 위하여 배관시스템의 유지 및 보수 등을 수행하고 있다. 특히 한국지역난방공사와 같은 대형플랜트 배관시스템의 고장은 기업의 생산성과 이익에 직결된 문제일 뿐만 아니라 국민의 안전과 편익과 같은 매우 중요한 문제를 유발할 수 있기 때문에 빠른 대응과 안전한 수리가 가장 중요한 문제로 대두되고 있다. 본 연구에서는 한국지역난방공사 사용 중인 이중보온 열수송관(300A)의 유지보수를 위하여 액화질소를 이용한 배관 동결차수공법을 개발하였다. 본 연구에서는 전산해석기법을 채용하여 대상 열수송관과 전용 재킷에 대한 내부 유동 및 열전달 해석을 수행하여 최적의 시스템을 선정하고, 상세 모델을 설계, 제작하였다. 실험실 규모 시험장치를 개발하여 차수공법에 대한 자체시험을 수행하고, 한국지역난방공사 세종지사 Test bed에서 현장적용 성능평가 시험을 수행하였다.

• 설비공학논문집
• /
• 제24권6호
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• 설비공학논문집
• /
• 제21권12호
• /
• pp.715-732
• /
• 2009

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2008. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends in thermal and fluid engineering have been surveyed in the categories of general fluid flow, fluid machinery and piping, new and renewable energy, and fire. Well-developed CFD technologies were widely applied in developing facilities and their systems. New research topics include fire, fuel cell, and solar energy. Research was mainly focused on flow distribution and optimization in the fields of fluid machinery and piping. Topics related to the development of fans and compressors had been popular, but were no longer investigated widely. Research papers on micro heat exchangers using nanofluids and micro pumps were also not presented during this period. There were some studies on thermal reliability and performance in the fields of new and renewable energy. Numerical simulations of smoke ventilation and the spread of fire were the main topics in the field of fire. (2) Research works on heat transfer presented in 2008 have been reviewed in the categories of heat transfer characteristics, industrial heat exchangers, and ground heat exchangers. Research on heat transfer characteristics included thermal transport in cryogenic vessels, dish solar collectors, radiative thermal reflectors, variable conductance heat pipes, and flow condensation and evaporation of refrigerants. In the area of industrial heat exchangers, examined are research on micro-channel plate heat exchangers, liquid cooled cold plates, fin-tube heat exchangers, and frost behavior of heat exchanger fins. Measurements on ground thermal conductivity and on the thermal diffusion characteristics of ground heat exchangers were reported. (3) In the field of refrigeration, many studies were presented on simultaneous heating and cooling heat pump systems. Switching between various operation modes and optimizing the refrigerant charge were considered in this research. Studies of heat pump systems using unutilized energy sources such as sewage water and river water were reported. Evaporative cooling was studied both theoretically and experimentally as a potential alternative to the conventional methods. (4) Research papers on building facilities have been reviewed and divided into studies on heat and cold sources, air conditioning and air cleaning, ventilation, automatic control of heat sources with piping systems, and sound reduction in hydraulic turbine dynamo rooms. In particular, considered were efficient and effective uses of energy resulting in reduced environmental pollution and operating costs. (5) In the field of building environments, many studies focused on health and comfort. Ventilation. system performance was considered to be important in improving indoor air conditions. Due to high oil prices, various tests were planned to examine building energy consumption and to cut life cycle costs.