• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.87-94
• /
• 2018

The interactions of water soluble polymers with dye are studied by ultrafiltration using a molecular weight cut off of 10 KDa regenerated cellulose ultrafiltration membrane. Two water-soluble polymers, namely Poly (Sodium-4 Styrenesulfonate) (PSS) and Poly (Vinyl Alcohol) (PVA) were selected for this study. The effects of process parameters, such as, polyelectrolyte concentrations, transmembrane pressure, ionic strength and pH of solution on dye retention and permeation flux were examined. PSS enhanced ultrafiltration achieved dye retention as high as 99% as a result of complexation between polyanion containing aromatic groups and cationic dye. This result was confirmed by the red shift. The retention of dye decreases as the salt concentration increases, a high retention was obtained at pH above 4. However, in case of PVA, relatively low retention (50%) was observed. Ionic strength and pH has no significant effect on the removal of MB. The permeate flux depended slightly on polyelectrolytes concentrations, transmembrane pressure, salt concentration and pH.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.277-283
• /
• 2011

Solid dispersion is mainly used for improved dissolution of poorly water-soluble drugs. Solid dispersion of pranlukast was prepared by spray-drying with plasdone S-630. When pH of water was high, pranlukast was highly soluble in the solubility experiment of solid dispersions with varying pH. The particle size of pranlukast particles in solid dispersions was measured to be in nanometers scale based on particle size analysis. Zeta-potential analysis confirmed the negative charge of solid dispersion. SEM was used to observe the surface of solid dispersion, which confirmed spherical morphology, DSC and XRD confirmed the amorphous nature of solid dispersions. The in vitro test was carried out to find improved dissolution rate of pranlukast solid dispersion in simulated juice gastric and a controlled experiment was carried out to compare pranlukast solid dispersions with a conventional drug (Onon$^{(R)}$), These results showed the dissolution properties of pranlukast solid dispersions prepared by spray drying proper for the oral pharmaceutical formulation.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.941-948
• /
• 1994

An underwater grout on material resistance against segregation in water were studied by water soluble polymer (methyl cellulose and acrylic acid ester and styrene). The mechanical properties of the grout agents were investigated through the observation of the microstructure and application of fracture mechanic. When the soluble polymer MC+AAES added with 0.6 wt% to the underwater grout agents the compressive strength, flexural strength and Young's modulus were about 58 MPa, 10 MPa and 3.2 GPa respectively, and critical stress intensity was about 0.8 MNm-1.5. It can be considered that the strength improvement and fracture toughness increase may be due to the pore decrease and bonding force by material resistance against segregation in water.

• Membrane and Water Treatment
• /
• v.5 no.3
• /
• pp.183-195
• /
• 2014

The efficiency of two metal ions (cadmium, zinc) removal from aqueous solutions by ultrafiltration (UF) and Polymer Enhanced Ultrafiltration (PEUF) processes were investigated in this work. The UF and PEUF studies were carried out using an ultrafiltration tangential cell system equipped with 5.000 MWCO regenerated cellulose. A water-soluble polymer: the polyacrylic acid (PAA) was used as complexant for PEUF experiments. The effects of transmembrane pressure, pH, metal ions and loading ratio on permeate fluxes and metal ions removals were evaluated. In UF process, permeate fluxes increase linearly with increasing pH for different transmembrane pressure, which may be the consequence of the formation of soluble metal hydroxyl complexes in the aqueous phase. In PEUF process, above pH 5.0, the Cd(II) retention reaches a plateau at 90% and Zn(II) at 80% for L = 5. Also, cadmium retention at different L is greater than zinc retention at pH varying from 5.0 to 9.0. In a mixture solution, cadmium retention is higher than zinc for different loading ratio, this is due to interactions between carboxylic groups of PAA and metal ions and more important with cadmium ions.

• Journal of Pharmaceutical Investigation
• /
• v.6 no.3
• /
• pp.58-69
• /
• 1976

It is well established that dissolution is freruently the rate limiting step in the gastrointestinal absorpton of a drug from a solid dosage from. The relationship between the dissolution rate and absorption is particularly distinct when considering drugs of low solubility. Consequently, numerous attempts have been made to modify the dissolution characteristics of poorly water soluble drugs. Since dissolution rate is directly proportional to surface area, one may increase the rate by decreasing the particle size of the drug. Levy has considered a number of methods by which a drug may be presented to the GI fludids in finely divided from. The direct method is the utilization of microcrystalline or micronized particles. A second method involves the administration of solutions from which, upon dilution with gastric fluids, the dissolved drug will precipitate in the form of very fine particles. A more unique way of obtaining microcrystalline dispersions of a drug has been ercently suggested by Sekiguchi et al. They have first proposed the formation of a eutectic mixture of a poorly water soruble drug with a physiologically inert, easily soluble carrier. When such systems are exposed to water or GI fluids, the soluble carrier will dissolve rapidly and the finely dispersed drug particles will then be released. It has been suggested by Shefter and Higuchi that the formation of crystalline solvate could be a powerful tool in affecting rapid disslution of highly insoluble substances. Goldberg et al. have noted that the formation of solid solution could reduce the particle size to a minimum and increase the dissolution rate as well as the solubility of the durgs. It has also been shown that the rates of solution of drugs were appreciably increased by coprectipitating the drug with soluble polymers. The increase was found to be sensitive to the method of preparation, the molecular weight of polymer and the particular ratio of drugs to polymer. Although several investigations have demontrated that the solubility and/or dissolution rates of drugs can be increased in this manner, little information is available in the literature related to the in vivo absorption pattern of drugs orally administered as PVP coprecipitates. Recently, however, it was demonstrated that both the rate and extent of absorption of the insoluble drug could be markedly enhanced when orally administered to rats in the form of a coprecipitate with PVP. The purpose of the present investigation was to ascertain the general appility of soluble polymer coprectation technique as a method for enhancing the in vitro dissolution rate of hydrophobic indomethacin. To accomplish this aim, the dissolution characteristics of pure indomethacin, indomethcin-polymer physical mixtures and indomethacin-polymer coprecipitates were quantitatively studied by comparing their relative dissolution rates. The solubility and dissolution behavior of these systems were also examined.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.1 no.3
• /
• pp.163-174
• /
• 2014

The objective of this study is to prepare an artificial extracellular matrix (ECM) for cell culture by using polymer hydrogels. The polymer used is a cytocompatible water-soluble phospholipid polymer: poly[2-methacryloyloxyethyl phosphorylcholine (MPC)-n-butyl methacrylate-p-nitrophenyloxycarbonyl poly(ethylene oxide) methacrylate (MEONP)] (PMBN). The hydrogels are prepared using a cross-linking reaction between PMBN and diamine compounds, which can easily react to the MEONP moiety under mild conditions. The most favorable diamine is the bis(3-aminopropyl) poly(ethylene oxide) (APEO). The effects of cross-linking density and the chemical structure of cross-linking molecules on the mechanical properties of the hydrogel are evaluated. The storage modulus of the hydrogel is tailored by tuning the PMBN concentration and the MEONP/amino group ratio. The porous structure of the hydrogel networks depends not only on these parameters but also on the reaction temperature. We prepare a hydrogel with $40-50{\mu}m$ diameter pores and more than 90 wt% swelling. The permeation of proteins through the hydrogel increases dramatically with an increase in pore size. To induce cell adhesion, the cell-attaching oligopeptide, RGDS, is immobilized onto the hydrogel using MEONP residue. Bovine pulmonary artery endothelial cells (BPAECs) are cultured on the hydrogel matrix and are able to migrate into the artificial matrix. Hence, the RGDS-modified PMBN hydrogel matrix with cross-linked APEO functions as an artificial ECM for growing cells for applications in tissue engineering.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.63-67
• /
• 1993

• Cement Symposium
• /
• no.20
• /
• pp.26-30
• /
• 1992

• Journal of Pharmaceutical Investigation
• /
• v.40 no.spc
• /
• pp.97-102
• /
• 2010

A novel surface-attached solid dispersion is designed to improve the solubility and oral bioavailability of poorly water-soluble drugs without crystalline change. Accordingly, it draws increasing interest because of excellent stability and no pollution for accomplishing enhanced solubility and bioavailability, which have recently been highlighted in connection with a number of higher value-added poorly water-soluble drugs. In addition, excellent stability can be attained when the poorly water-soluble drugs are not dissolved but dispersed in water and provide no crystallinity change. This solid dispersion is given by means of attaching the dissolved carriers such as hydrophilic polymer and surfactant to the surface of dispersed drug particles followed by changing the hydrophobic drug to hydrophilic form. The aim of the present review is to outline the preparation, physicochemical property and bioavailability of novel surface-attached solid dispersion with improved solubility and bioavailability of poorly water-soluble drugs without crystalline change.

• The Journal of the Korean Society for Microbiology
• /
• v.35 no.1
• /
• pp.77-85
• /
• 2000

Streptococcus mutans is the most important causative bacteria of dental caries among the oral bacteria. Lactococcus lactis 1370 was isolated from the oral cavity of child. The effect of Lactococcus lactis 1370 on the formation of artificial plaque by Streptococcus mutans was studied. 1. The insoluble substances and bacteria were much more attached on the wall of disposable cuvette in the culture of Streptococcus mutans than in the combined culture of Streptococcus mutans and Lactococcus lactis 1370. 2. The mean weight of produced artificial plaque on the wires in the beaker was 131.7 mg in the culture of Streptococcus mutans only, whereas being reduced to 6.4 mg in the combined culture of Streptococcus mutans and Lactococcus lactis 1370 (p<0.05). The viable cell didn't show the significant difference between them after culturing. 3. When Streptococcus mutans was cultured in the media containing culture supernatant of Lactococcus lactis 1370 cultured in M17 broth containing 0.5% yeast extract and 5% sucrose, the mean weight of produced artificial plaque was 8.0 mg on the wires, whereas being 125.4 mg in the media without culture supernatant of Lactococcus lactis 1370 (p<0.05). The viable cell didn't show the significant difference between them after culturing. 4. When Streptococcus mutans was cultured in the media containing soluble polymer produced by Lactococcus lactis 1370, the mean weight of produced artificial plaque was significantly reduced compared with being cultured in the media without soluble polymer (p<0.05). The viable cell didn't show the significant difference between them after culturing. 5. The soluble polymer produced by Lactococcus lactis 1370 was glucan. 6. The glucan produced by Lactococcus lactis 1370 was water-soluble glucan containing ${\alpha}$-1,6-glucose linkage as the main linkage. These results suggest that the artificial plaque formed by Streptococcus mutans is inhibited by water-soluble glucan produced by Lactococcus lactis 1370.