• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.109-120
• /
• 2004

There has been outstanding research on the soil-water characteristic curves of unsaturated soils over the past several decades. Unfortunately, unsaturated soil mechanics has not been considered as an important factor in Korea. In this paper, laboratory test and numerical analysis(SoilVision Professional ver 3.04) were performed to investigate the prediction method of soil-water characteristic curve and unsaturated permeability coefficient in reclaimed ground. The pressure cell, desiccator, and tensiometor tests were conducted on three types of reclaimed soils(dredged soil, sand, weathered granite soil). Numerical analysis was executed to compare the results with the laboratory test results and also compared with the results of each prediction method. Based on the laboratory test, three different types of soils have shown different soil-water characteristic curves. The hysteresis fir these soils is clearly defined. As a result of numerical analysis, Fredlund & Xing's method and Fredlund & Wilson's model proved to worke out well for reclaimed ground soils in Korea. Also, predicting method based on the soil-water characteristic curves from the particle-size distributions is flirty reliable for estimating unsaturated permeability coefficient.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.115-115
• /
• 2015

국내 물관련 건설 및 설비 업체를 대상으로 하는 설문조사 및 인터뷰 결과 국내 물 관련 기업들의 해외진출 시 가장 큰 애로사항은 해외경험 직원의 부족으로 나타났다. 해외사업 확대를 위해서는 고부가가치 업무를 수행할 수 있는 고급기술자와 관리 인력의 양성이 시급하며, 특히 건설사업관리(CM, PM)나 설계/엔지니어링을 담당할 고급 기술 인력의 양성이 필요한 것으로 조사되었다. 경쟁력있는 글로벌 기술 관리 인력의 양성은 정부의 주도하에 기존의 물 관련 기관의 교육프로그램 통합 운영 및 내실있는 전문 수자원 대학원 운영 등 장기적인 정책적인 지원이 필수적이다. 또한 현재 해외 물시장 정보 수집의 활성화를 위하여 국토교통부, K-water, 해외건설협회 등이 연계한 물 산업 전담 정보시스템 구축과 중점 수출대상국 선정 후 대상국에 해외지부 운영 등이 필요할 것이다. 금융지원과 관련하여 해외건설 금융지원 강화를 위한 글로벌 인프라펀드 조성, 해외건설 보증한도 확대 등이 필요하며, 'EDCF 등 공적금융의 물산업 지원 확대 등 재정지원을 위한 정부의 적극적인 역할 역시 중요하다. 해외 물시장 진출을 위해서는 국내 물기업들의 역량을 결집하는 것이 필요하며, 이를 위해서는 효율적인 공공 민간 협의체의 설립 및 운영이 이루어져야 한다. 전 세계적으로 물 산업은 높은 공공성과 함께토탈 솔루션 역량이 중시되고 있으며, 이런 시장환경에 부응하여 네덜란드, 독일 등 물산업 수출 강국은 자국의 물관련 분야를 결집하는 워터 파트너십을 설립하여 국제사회에서 위상과 세계시장 점유율을 동시에 높여가고 있는 실정이다. 이들 국가 워터파트너십의 공통적인 설립 목적은 궁극적으로 자국 물 관련 산업, 국가 브랜드 및 이니셔티브와 관련되는 국제협력, 정책 분야 등의 결집이다. 다시 말해서 정부가 주축이 되어 관 산 학 연 기관간의 정보제공, 협력 등을 도모하고 있으며 이 네트워크의 구심점 역할 및 촉진은 자국의 워터파트너십이 맡고 있는 것이다. 해외 물 시장 확대를 도모하고 있는 우리나라도 국가차원의 장기적이고 지속적인 해외 물산업 네트워크 구축을 위해서는 정부-공기업-민간기업 등의 협력을 토대로 한 Korea Water Partnership을 조속히 설립하는 것이 필요하다. 이를 위해서는 국토부, 환경부 등 물 관련 부처는 물론 글로벌 네트워크를 구축하고 있는 외교부, 무역협회 등 유관기관의 정보 연계 및 협조 체계 역시 필요하다. 정부부처 차원의 조직은 국제 정치 아젠다(agenda)에 중대한 영향을 줄 수 있으며, 경쟁적 우위와 유사기관 간의 정보와 네트워킹의 공유를 보다 원활하게 할 수 있기 때문이다. Korea Water Partnership에서는 한국이 보유하고 있는 선진 수자원기술 및 경험을 해외에 소개하고, 정부 및 민간 기업들의 물 산업 수출역량을 적극적으로 피력할 수 있는 기회를 마련하며, 국제사회에서 물 강국으로서 한국의 위상을 높일 수 있는 홍보 마케팅 창구로서의 역할을 기대할 수 있을 것이다.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.4
• /
• pp.47-58
• /
• 2005

Development of underground space is conducted for various useful facility and underground structures and deep excavation technology for reclaimed area has been researched and developed. The seepage flow and behavior of phreatic line in reclaimed area was predominated by transient flow caused by tidal action. Also the soil-water characteristic relation is most important factor for transient flow analysis, therefore the research about the soil-water characteristic is strongly required. In this paper, laboratory tests (pressure cell, desiccator, and tensiometer test) and theoretical analysis were performed to investigate the soil-water characteristic such as air-entry value, metric suction, and residual water content. And the feasibility of prediction method for soil-water characteristic are presented by transient seepage analysis and comparison between analysis results and in-situ measured seepage flux in LNG TK-00 storage tank. Based on the result of laboratory and theoretical analysis, Fredlund and Xing's method provide to work out well for reclaimed ground soils. Also, the transient analysis result is more reasonable and effective for design of deep excavation work in coastal and reclaimed ground.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.483-492
• /
• 2020

In this study, we compared and analyzed the Revealed Comparative Advantage (RCA) and Trade Specialization Index (TSI) based on ballast water management systems (BWMS) trade data, which are related to the International Maritime Organization (IMO) Ballast Water Management Convention to suggest the current status of Korea's industrial competitiveness and suggest future development directions for the BWMS industry. As international interest in eco-friendly vessels is expanding, the IMO is engaged in dramatic discussions and agreement-making related to marine emissions of pollutants from ships. IMO member states that must implement this convention are striving to develop technology and secure industrial competitiveness as major industries in the eco-friendly shipping sector, with the BWMS industry experiencing a high market entry barrier and the possibility of the leading market entrants gaining leadership. The Republic of Korea accounts for 17 (approximately 38 %) of the 45 BWMS that received final approval as of October 2019. Based on trade data relating to product codes HS842219, HS84212, and HS89, the RCA index and TSI were calculated and compared. The findings revealed that the Republic of Korea has relative inferiority compared to countries such as Germany and Denmark. Despite this, Korea's favorable industrial environment, which includes several IMO-approved BWMS technologies and the possession of domestic certification institutions, is likely to strengthen its competitiveness in the BWMS market.

• Journal of the Society of Disaster Information
• /
• v.11 no.3
• /
• pp.318-328
• /
• 2015

Effective urban flood reduction and restoration of natural water cycle at present include the application of permeable pavements. The application of permeable pavement addresses urban water cycle and disaster related events which gained attention internationally. However, few researches have been conducted to investigate unsaturated behavior and evaluate the water characteristics curves of these type of pavement materials most especially in the unsaturated state. In this study, first the saturated permeability and the soil-water characteristics curve of a pervious concrete are evaluated based on laboratory tests, and, based on experimental results, the infiltration of permeable pavement system is numerically modelled. In the soil-water characteristics curve of a pervious concrete, the volumetric water content drops very steeply after the air entry value with increasing matric suction. From the finite element analyses, the performance of the permeable pavement when compared to impermeable pavement, confirmed that the whole system effectively delayed and reduced runoff.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.5
• /
• pp.19-26
• /
• 2014

The cross flow turbine attracts more and more attention for its relatively wide operating range and simple structure. In this study, a novel type of micro cross flow turbine is developed for application to a step in an irrigational channel. The head of the turbine is only H=4.3m and the turbine inlet channel is open ducted type, which has barely been studied. The efficiency of the turbine with inlet open duct channel is relatively low. Therefore, a guide nozzle on the turbine inlet is attached to improve the performance of the turbine. The guide nozzle shapes are investigated to find the best shape for the turbine. The guide nozzle plays an important role on directing flow at the runner entry, and it also decreases the negative torque loss by reducing the pressure difference in Region 1. There is 12.5% of efficiency improvement by attaching a well shaped guide nozzle on the turbine inlet.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.2
• /
• pp.115-133
• /
• 2015

This paper describes an approach for the numerical analysis of container ship slamming and whipping and various parameters that influence slamming and whipping. For validation purposes, the numerical analysis results were compared with experimental results obtained as part of the Wave-Induced Loads on Ships Joint Industry Project. Water entry problems for two-dimensional (2D) sections were first solved using a 2D generalized Wagner model (GWM) for various drop conditions and geometries. As the next step, the hydroelastic numerical analysis of a 10,000-TEU container ship subjected to slamming and whipping loads in waves was performed. The analysis method used is based on a fully coupled model consisting of a three-dimensional (3D) Rankine panel model, a 3D finite element model (FEM), and a 2D GWM, which are strongly coupled in the time domain. Parametric studies were carried out in both numerical and experimental tests with various forward speeds, wave heights, and wave periods. The trends observed and the validity of the numerical analysis results are discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1250-1255
• /
• 2010

In this study, in order to examine the hydraulic characteristics for a crushed stone mat. it was accomplished discharge capacity test and soil-water characteristic curve(SWCC) with the object of the research. From the test result, it produced propriety mixed ratio of the crushed stone which mixes the sand. at the time of crushed stone 100% where it does not mixes the sand it appeared that permeability was biggest. increase of shock and content of the sand showed decrease of air entry value.

• Journal of the Korean Society of Visualization
• /
• v.8 no.1
• /
• pp.53-60
• /
• 2010

Experimental investigations were conducted to study the characteristics of turbulent swirling flow in an axisymmetric annuli. Swirl angle measurements were performed using a flow visualization technique using smoke and dye liquid for Re=60,00080,000. Using the two-dimensional particle image velocimetry method, we found the time-mean velocity distribution and turbulent intensities in water with swirl for Re=20,000, 30,000, and 40,000 along longitudinal sections. Neutral points occurred for equal axial velocity at y/(R-r)=0.70.75, and the highest axial velocity was recorded near y/(R-r)=0.9. Negative axial velocity was observed near the convex tube along X/(D-d)=3~23. Another experimental study was performed to investigate heat transfer characteristics of turbulent swirling flow in an axisymmetric annuli. Static pressure, and local flow temperature were measured using tangential inlet condition and the friction factors and Nusselt number were calculated for several Reynolds numbers.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.1-12
• /
• 2010

This study aims at analyzing the development status of surroundings of natural environment conservation areas and securing an adequate distance from development activities to conserve natural environment conservation areas efficiently or developing an improvement plan for setting conservation areas. Findings from the study shows that 1) rather than simply designating a legal natural environment conservation area, a conceptual scope approach of a "core area", "buffer area", and "transition area" such as in zoning of a "biosphere reserve" by UNESCO is recommended; 2) when setting an adequate range in a natural environment conservation area, it should be set by fully considering locational situation and the regional and environmental features of surroundings rather than setting a certain distance uniformly; 3) instead of designating wetlands only as a conservation area, entry and exit areas should be also included as buffer areas and in the case of wild animals, not only habitats but also feeding areas should be designated as conservation areas; and 4) an adequate horizontal separation space is important in the case of ground development, but for natural resources related to subterranean water and geological situation such as wetlands, an adequate vertical separation space should be fully considered.