DOI QR코드

DOI QR Code

원형동심관내 선회유동의 열전달에 대한 실험적 연구

Experimental Study on Heat Transfer with Swirling Flow in a Cylindrical Annuli

  • Chang, Tae-Hyun (Korea Institute of Science and Technology Information) ;
  • Kil, Sang-Cheol (Korea Institute of Science and Technology Information) ;
  • Lee, Kwon-Soo (Dept. of Mechanica1 and Automotive Engineering, International University of KOREA)
  • 투고 : 2010.02.07
  • 심사 : 2010.03.29
  • 발행 : 2010.03.31

초록

Experimental investigations were conducted to study the characteristics of turbulent swirling flow in an axisymmetric annuli. Swirl angle measurements were performed using a flow visualization technique using smoke and dye liquid for Re=60,00080,000. Using the two-dimensional particle image velocimetry method, we found the time-mean velocity distribution and turbulent intensities in water with swirl for Re=20,000, 30,000, and 40,000 along longitudinal sections. Neutral points occurred for equal axial velocity at y/(R-r)=0.70.75, and the highest axial velocity was recorded near y/(R-r)=0.9. Negative axial velocity was observed near the convex tube along X/(D-d)=3~23. Another experimental study was performed to investigate heat transfer characteristics of turbulent swirling flow in an axisymmetric annuli. Static pressure, and local flow temperature were measured using tangential inlet condition and the friction factors and Nusselt number were calculated for several Reynolds numbers.

키워드

참고문헌

  1. Rothfus R. R., 1948, Velocity Distribution and Fluid Friction in Concentric Annuli, Ph.D thesis, Carnegie Institute of Technology.
  2. Brighton J. A. and Jones J. B., 1964, "Fully Developed Turbulent Flow in Annuli", J. of Basic Eng., Vol.86, pp.835-844. https://doi.org/10.1115/1.3655966
  3. Alan Quarmby. 1967, "An Experimental Study of Turbulent Flow Through Concentric Annuli", Int. J. Mech. SI, Vol.9, pp.205-221. https://doi.org/10.1016/0020-7403(67)90030-6
  4. Chighier A. N. and Beer J. M., 1964, "Velocity and-Static - Pressure Distributions in Swirling Air Jets Issuing From Annular and Divergent Nozzle", ASME, J. of Basic Engineering, pp.788-796.
  5. Scott C. J. and Raske D. R., 1973, "Turbulent Visco-sities for Swirling Flow in a Stationary Annulus", ASME J. of Fluid Engineering, Vol.95, pp.557-566. https://doi.org/10.1115/1.3447070
  6. Milar D. A., 1979, "A Calculation of Laminar and-Turbulent Swirling Flows in a Cylindrical Annuli", ASME, Winter Annual Meeting New York Dec. pp. 89-98.
  7. Clayton B. R.,and Morsi S. M., 1985, "Determination of Principal Characteristics of Turbulent Swirl-ing Flow Along Annuli", Int. J. Heat & Fluid Flow 6(1), pp.31-41. https://doi.org/10.1016/0142-727X(85)90029-3
  8. Reddy P. M., Kind R. J. and Sjolander S. AA., 1987, "Computation of Turbulent Swirling Flow in an Annular Duct", Num. Method in Laminar and Turbulent Flow pp.470-481.
  9. Tae-Hyun Chang and Hee-Young Kim, 2001, "An Investigation of Swirling Flow in a Cylindrical Tube", KSME Int. J., Vol.15(12), pp.1892-1899.
  10. Kimura I., Takamori T. and Inoue T., 1986, "Image Processing Instrumentation of Flow", Flow Visualization, Vol.6(22), 105-108.
  11. Kobayashi, T., Saga, T., Haeno, T., Tsuda, N., 1991, "Development of a Real-Time Velocity Measure-ment System for High Reynolds Fluid Flow Using a Digital Image Processing Design", Experimental and Numerical Flow Visualization(Ed Khalighia B. et. al.), ASME FED No.128, pp.9-14.
  12. Sparrow E. M. and Chaboki A., 1984, "Swirl-Affect-ed Turbulent Fluid Flow and Heat in a Circular Tube", J. of Heat Transfer ASME, Vol.106, pp.766-773. https://doi.org/10.1115/1.3246750