• 한국광학회지
• /
• 제22권6호
• /
• pp.283-290
• /
• 2011

수증기의 혼합비를 측정하기 위하여 라만 라이다 시스템을 설계 제작하였다. 시스템을 검증하기 위하여 가강수량과 분포에 대하여 상용 마이크로파 라이오메터(MWR)와 GPS 신호를 이용하는 방법과 비교 연구를 수행하였다. GNSS 방법으로 측정한 총가강수량과 본 라이다 방법에서는 작은 차이를 보였는데, 이는 라이다 방법으로 얻을 수 있는 수증기의 측정고도가 제한적이기 때문이다. 반면에 MWR 방법과 라이다 방법으로 얻은 고도에 따른 수증기량은 수증기량이 급격하게 변하는 구름 경계나 경계고도 근처에서 심한 차이를 보이고 있었다. MWR은 그 밀도가 급격하게 변하는 곳에서 취약한 점을 보였으나 개발된 라만 라이다의 경우는 그 밀도가 급격히 변하는 곳에서도 측정이 원활하게 이루어지고 있음을 알 수 있었다.

• 한국식품과학회지
• /
• 제34권6호
• /
• pp.1023-1029
• /
• 2002

본 연구는 천연전분과 hydroxypropyl화 전분에 가소제를 0, 16, 33, 50, 66% 비율로 첨가하여 RVA점도를 측정하고 필름을 제조한 후 물성을 측정하여 두 물성 사이의 상관관계를 알아보고자 행하였다. 필름의 인장강도는 가소제의 함량이 높아질수록 감소하였고 신장율과 수증기투과도는 증가하였으며 glycerol이 sorbitol보다 큰 변화를 보이는 것으로 나타났다. Hydroxypropyl화 전분이 천연전분에 비해 강도는 떨어지나 신장율은 높아지는 것으로 나타났고 수증기투과도는 2배 큰 것으로 나타났다. 가소제를 혼합하여 필름의 물성을 측정한 결과 sorbitol은 유연성보다는 필름의 강도를 유지하는 역할을 그리고 glycerol은 필름의 신장율을 증가시키는 역할을 하는 것으로 나타났다. RVA물성과 필름 물성의 관계에서 가장 연관성이 높은 것은 peak viscosity, 인장강도, 수증기투과도인 것으로 판명되었고 peak viscosity와 인장강도, peak viscosity와 수증기투과도의 관계는 각각 직선적인 것으로 나타났다. 따라서 RVA 물성 중 peak viscosity를 활용하여 필름의 인장강도, 수증기투과도를 예측할 수 있다고 판단되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.238.2-238.2
• /
• 2015

Surface modification of vertically-aligned carbon nanotube (VACNT) is essential in order to meet specific demands for particular applications such as field emission displays, heat dissipation device and potential sun energy conversion due to their superior electrical and thermal conductivity and strong light absorption. In this study, we observe the effect of exposure to water vapor on a different lengths of the surfaces of VACNT. The study was conducted on three different lengths of the VACNT: short length around $200{\mu}m$, medium-length around $500{\mu}m$, and high length around 1 mm. Water exposure time ranges between 2-10 min and temperature of the water ranges from 60 to 120 oC. The result of water vapor exposure mainly show that increasing the exposure time and water temperature give rise to increase of the speed of change on the surface of the VACNT. Especially, the shorter VACNT change their surface morphology most rapidly.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.304-310
• /
• 2001

A numerical model which simulates the heat and mass transfer processes within a counter-current plate type generator for ammonia/water absorption refrigerators was developed. Ammonia/water solution flows downward under gravity and ammonia/water vapor generated by flow boiling flows upward. The flow pattern within the generator was assumed to be a bubbly flow, and the liquid and vapor phase were assumed to be saturated. It was shown that the boiling of ammonia occurred mainly in the upper part of the generator. The effects of the generator length, the wall temperature and the mass flow rate of ammonia/water solution into the generator on the generation of ammonia/water vapor were investigated.

• Journal of Applied Biological Chemistry
• /
• 제43권2호
• /
• pp.79-85
• /
• 2000

Biodegradable films were prepared from roasted sesame meal and rice bran. Acetic anhydride, succinic anhydride, and formaldehyde were added to the film-forming solutions, and their effects on tensile strength, percent elongation, water vapor permeability, and water solubility of the films were studied. Roasted sesame meal did not form film without acylation or addition of formaldehyde. Acylated roasted sesame films had higher tensile strength and water-solubility, and lower % elongation than rice bran films. Acylation with acetic and succinic anhydrides increased tensile strength, percent elongation, and water solubility of rice bran films, but decreased water vapor permeability. Treatment with formaldehyde increased tensile strength of roasted sesame and rice bran films and % elongation of rice bran films, while reducing water-solubility of roasted sesame and rice bran films and water vapor permeability of rice bran films.

• 멤브레인
• /
• 제22권5호
• /
• pp.369-380
• /
• 2012

본 연구에서는 직접 접촉식 막증류 공정에서 운전인자에 따른 담수 투과량과 열효율을 예측하기 위해 열 및 물질전달 방정식을 이용하여 1차원 해석모델을 개발하였다. 이 해석모델의 타당성을 검증하기 위해 해석모델 결과와 기존 연구자들에 의해 수행된 실험 결과를 비교하였고 만족할 만한 결과를 얻었다. 이를 통해 DCMD 모듈에서 염수와 증류수의 입구온도 및 입구속도가 담수 투과량 및 열효율에 미치는 영향을 분석하였다. 그 결과 염수의 입구온도와 입구속도가 증류수의 입구온도와 입구속도보다 담수 투과량과 열효율 증가에 미치는 영향이 크기 때문에 지배적인 운전특성이라는 것을 알 수 있었다. 염수의 입구온도가 $60^{\circ}C$에서 $95^{\circ}C$로 증가할 때 담수 투과량이 21.22 $kg/m^2h$에서 71.26 $kg/m^2h$로 3.4배 증가하였고 열효율은 0.556에서 0.765로 37.5% 증가하였다. 한편, 염수의 입구속도가 60에서 300 m/h로 증가함에 따라 담수 투과량이 27.91 $kg/m^2h$에서 36.33 $kg/m^2h$로 30% 증가하였고 열효율은 0.6에서 0.646로 7.5% 증가함을 알 수 있었다.

• Fibers and Polymers
• /
• 제3권4호
• /
• pp.153-158
• /
• 2002

A series of waterborne polyurethanes (WBPU) were prepared from 4,4-dicyclohexylmethane diisocyanate ($H_{12}$MDI),2,2-bis(hydroxylmethyl) propionic acid (DMPA), othylenediarnine (EDA), triethylamine (TEA), and triblock glycol [TBG, ($\varepsilon$-caprolactone)$_{4.5}$-poly(tetramethylene ether) glycol (MW= 2000)-($\varepsilon$-caprolactone)$_{4.5}$: $(CL)_{4.5}$-PTMG-$(CL)_{4.5}$, MW=3000] as a soft segment. Two melting peaks of TBG at about 14$^{\circ}C$ and 38$^{\circ}C$ were observed indicating the presence of two different crystalline domains composed of CL and PTMG dominant component. The effect of soft segment content (60-75 wt%) on the colloidal properties of dispersion, and thermal and mechanical properties of WBPU films, the water vapor permeability (WVP) and water resistance (WR) of WBPU-coated Nylon fabrics, and the adhesive strength of WBPU- coated layer and Nylon fabrics was investigated. As soft segment contents increased, the water vapor permeability of WBPU- coated Nylon fabrics increased from 3615 to 4502 g/$m^2$day, however, the water resistances decreased from 1300 to 500 mm$H_2$O.O.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1036-1038
• /
• 2003

Diurnal variations in the atmospheric vapor at Banchiao of Taiwan are studied by analyzing 30 min-averaged data in the summer of 1998. The surface meteorological measurements were mainly obtained from the Central Weather Bureau (CWB) of Taiwan. It is found that precipitable water (PW) is increased in the afternoon. The maximum of precipitable water appears at around 0900 LST. The diurnal range of precipitable water is larger on the days with than without rainfall events. Rainfall events often occur in the afternoon and early morning. We also examine the difference in the characteristics of the PW signatures with and without rainfall according to the occurrence of the times for the rainfall peak and the onset of rainfall.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.191-198
• /
• 1998

In this study, the effects of water vapor in inlet air, spark advance and fuel type in the spark ignition engine were investigated through the experiments of combustion and flame arriving pattern analysis using ionization probe. The results of flame propagation experiment using ionization probe show that the flame which ignited from spark plug located at the center of the combustion chamber propagated faster in exhaust side than in intake side due to the mixture flow motion inducted into combustion chamber from intake tumble port at all conditions. And as the partial vapor pressure increased, the flame propagation became slower in all direction. Especially effects were greater for intake side than the exhaust side.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.22-23
• /
• 2006

A process for removal of photoresist(PR) m semiconductor manufacturing using water vapor with ozone is presented. For the realization of the ozone/vapor mixture process, high concentration ozone generator and process facilities have developed. As a result of the silicon wafer PR strip test, we confirmed the high efficiency PR strip rates of 400nm/mm or more at the ozone concentration of 16wt%/$O_2$. The ozone/vapor mixture process is more effective than the ozonized water Immersion process.