• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.177-183
• /
• 2012

The use of energy pile foundation has been increased for economic utilization of geothermal energy. In particular, a coil-shaped ground heat exchanger (GHE) is preferred than conventional U-shaped heat exchanger to ensure better efficiency of heat exchange rate. This paper presents experimental results by changing different pitch spaces of spiral coils. Joomunjin sand was filled in a steel box of which the size was $5m{\times}1m{\times}1m$. Thermal response tests (TRTs) were conducted to measure the ground thermal conductivity with temperatures of circulating water using line source model and ring coil model. Experimental results and analytical solutions were compared to validate the applicability of these models. Ring coil model showed more accurate similar results with experimental data rather than line source model and cylindrical source model.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.4
• /
• pp.732-736
• /
• 2000

The purpose of this study was to investigate the extraction method of phenolic compounds and antioxidant activities of the aerial part of Epimedium koreanum NAKAI (EKN). The antioxidant activities of EKN were tested with by hydrogen donating ability, inhibition of lipid peroxidation, and inhibition of LDL oxidation. The most suitable conditions for the extraction of phenolic compounds from EKN were to use 60% ethanol by 3 times, and the yield of extract (dry basis) was 22%. In the extraction efficiency of phenolic compounds, 60% ethanol as extracting solvent was superior to water. Sixty% ethanol extract of EKN was found to have an ability of hydrogen donating to DPPH. MDA determination showed the 95% inhibitory effect against linoleic acid oxidation by the addition of 700 ppm EKN extract. Also, about 70% of LDL oxidation was inhibited by the addition of 500 ppm.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.63-70
• /
• 2017

The purpose of this study was to calibrate the hydrologic parameters of SWAT model and analyze the daily runoff for the study watershed using SWAT-CUP. The Hardware watershed is located in Virginia, USA. The watershed area is $356.15km^2$, and the land use accounts for 73.4 % of forest and 23.2 % of pasture. Input data for the SWAT model were obtained from the digital elevation map, landuse map, soil map and others. Water flow data from 1990 to 1994 was used for calibration and from 1997 to 2005 was for validation. The SUFI-2 module of the SWAT-CUP program was used to calibrate the hydrologic parameters. The parameters were calibrated for the highly sensitive parameters presented in previous studies. The P-factor, R-factor, $R^2$, Nash-Sutcliffe efficiency (NS), and average flow were used for the goodness-of-fit measures. The applicability of the model was evaluated by sequentially increasing the number of applied parameters from 4 to 11. In this study, 10-parameter set was accepted for calibration in consideration of goodness-of-fit measures. For the calibration period, P-factor was 0.85, R-factor was 1.76, $R^2$ was 0.51 and NS was 0.49. The model was validated using the adjusted ranges of selected parameters. For the validation period, P-factor was 0.78, R-factor was 1.60, $R^2$ was 0.60 and NS was 0.57.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.6
• /
• pp.505-512
• /
• 2006

In Korea, silicate fertilization (SF) is being practiced every four years to enhance rice production. However, the relationship between nitrogen (N) and SF in view of growth characteristics and grain yield of rice has not been examined after watermelon cropping in plastic film house. This study was carried out to identify useful critical N and Si fertilizer levels to sustain grain yield and to improve N use efficiency for rice. The watermelon-rice cropping system has maintained for three seasons in each year from 1998 to 2001 by farmer before this experiment. Experiments on N and Si fertilization levels were evaluated with Hwayoungbyeo (Oryza sativa L.) in 2002 and 2003 at Uiryeong, Korea. The goal of this experiment was to find out the optimum N and Si levels to sustain rice yield by reducing excessive N fertilizer in watermelon-rice cropping system. Nitrogen fertilization (NF) levels were three ($0,\;57,\;114kg\;ha^{-1};0,\;50,\;100%$ of conventional NF amount) and five (0, 25, 50, 75, 100%) in 2002 and 2003, respectively, and combined with three SF levels ($70,\;130,\;180mg\;kg^{-1};100,\;150,\;200%$ which were adjusted with Si fertilizer in soil) were evaluated for the improvement of N and Si fertilization level in both years. Rice yielded 3.98-5.95 and 2.84-4.02 t/ha in 2002 and 2003, respectively. Our results showed the combinations of 50% and 100% of N with 200% level of Si produced the highest grain yield in both years, respectably. The grain yield was greatly improved in plot of N25% level when compared to conventional NF (Nl00%) in 2003. In conclusion, NF amount could be reduced about 50% compared to recommended level by specific fertilization of N and Si combination levels for rice growing and grain yield after cultivation watermelon in paddy field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.93-101
• /
• 2008

The effects of $CO_2$ enrichment on growth of maize (Zea mays L.) were examined. Parameters analyzed include growth characteristics, yields, photosynthetic rates, evaporation rates and photosynthesis-related characteristics under elevated $CO_2$. The plants were grown in growth chambers with a 12-h photoperiod and a day/night temperature of $28/21^{\circ}C$ at the seedling stage and $30/23^{\circ}C$ from the silking stage. The plants were exposed to two elevated $CO_2$ of 500, 700ppm and ambient levels (350 ppm). Chalok 1 and GCB 70 germinated three days after seeding, and germination rates were faster in the elevated $CO_2$ than the control. Germination rates displayed significant differences among the $CO_2$ treatments. At the seedling stage, leaf area, top dry weight, and photosynthetic rates, and plant height indicated positive relationship with elevated $CO_2$ concentrations. At the $5{\sim}6$ leaf stage, $CO_2$ concentration also indicated positive relationship with plant height, leaf area, top dry weight, and photosynthetic rates. At the silking stage, increased plant height of Chalok 1 was noted in the $CO_2$ treatments compared to the control. No significant differences were noted for GCB 70, in which leaf area decreased but photosynthetic rates increased progressively with $CO_2$ concentration. Stomatal aperture was a little bigger in the elevated $CO_2$ than the control. $CO_2$ concentration was negatively related to stomatal conductance and transpiration rates, resulting in high water use efficiency.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.35-47
• /
• 1979

수자원과 에너지는 식량 생산에 직접 간접으로 큰 영향을 미치고 있으며 또한 1973년 에너지 위기 이후 농업에 사용된 에너지가 효율적으로 사용되었는가에 대한 연구는 농공학자들의 큰 관심이 되어왔다. 본 연구는 필리핀의 수작농업에 있어서 경운정지시 관개에 따른 토양경도의 변화와 , 토양경도와 연료소모율과의 관계를 구명하고, 에너지와 관개수의 효율적인 이용을 연구하고저 건기와 우기에 각각 수행되었으며 그의 결과를 요약하면 다음과 같다. 가. 건기 1) 관개시작후 1-2일간 토양의 수분함량이 증가함에 다라 토양의 경도는 급격히 감소하였으며, 관개 3일째는 온난한 감소를 ,그리고 4일째부터는 거의 변화가 없었다. 2) 토양의 경도에 따라 경운작업시 연료감소율, 기계의 작업성능에 큰 차가 있었으며 , 관개 3일후 토양의 수분함량과 토양의 경도가 안정됨에 따라 각 처리간의 연료의 소모율과 기계의 작업성능도 비슷하였다. 3) IRRI 5 Hp 경운기는 관개수로 인해 경도가 낮아진 토양에서도 이동성 문제가 없을 만큼 충분히 경량이었다. 4) 관개수의 양의 따라 처리별로 경운전 토양의 전단력에 큰 차가 있었으나 , 경운정지작업후의 토양전단력은 전처리에 있어서 거의 비슷하였다. 이는 경운정지작업시 처리간의 연료소모율, 기계의 작업성능의 차로 설명될 수 있다. 5) 경운정지시의 토양상태는 식물의 생육, 잡초의 발생율에 거의 영향을 미치지 않았다. 6) 본 실험은 한가지 토양형식에 대해 수행되었으며 앞으로 여러 토양형식에 대해 이와 같은실험을 수행하여 토양형식에 따른 수분함량, 토양경도, 에너지 소모율들의 관계를 구명하여 관개수의 효율적인 이용이 가능하리라 사료된다. 나. 우기 1) 경운작업전에 이미 토양이 수분으로 포함되어 있는 상태이었으므로, 추가의 관개수가 토양의 경도, 기계의 작업성능, 연료소모율에 영향을 미치지 않았다. 2) 경운정지기간이 가장 짧았던 처리구(3일) 에 있어서 경운정지후 토양전단력이 다른 3 처리에 비해 크게 나타났다. 식물의 생육 또한 타처리에 비해 저조했으며 잡초발생율도 높았다. 3) 경운정지기간이 가장 짧았던 처리구(3일)을 제외한 3처리 간에는 연료소모율, 식물생육, 잡초발생율등이 거의 비슷하였으며, 우기에는 위의 3 처리 중 11 간의 경운정지기간이 가장 효율적인 것으로 나타났다.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.3
• /
• pp.125-130
• /
• 2007

Many fundamental studies have been carried out regarding waste water and hazardous gas treatment technology using the photolysis effect of $TiO_2$. However, photolysis of both organic and organic-inorganic binders immobilizing $TiO_2$ makes permanent use impossible. In this study we manufactured a catalytic electrode by nickel-$TiO_2$ composite plating in order to immobilize $TiO_2$. The surface properties according to the current density changes of cathode and concentration changes of $TiO_2$ powder in nickel plating bath has been analysed with EDX, XRF, SEM, Raman spectrometer etc. The characterization of the catalytic electrode in decomposition of organic compound has been obtained by using UV-Visible spectrophotometer through analysing concentration changes of methyl orange solution containing the catalytic electrode vs. time with projecting UV-light in the solution. The study shows that a catalytic electrode of nickel-$TiO_2$ composite plating with high-efficiency in decompostion of organic compound has been formed under high concentration of $TiO_2$ powder and low current density of cathode.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.1
• /
• pp.7-14
• /
• 2017

This study aims to examine the influences of substrates/diffusion layers (DL) and oxygen reduction reaction catalysts ($M_{ORR}$) on the performance of $M_{ORR}/IrO_2$/DL-type bifunctional oxygen electrodes for use in polymer electrolyte membrane (PEM)-type unitized regenerative fuel cells (URFC). The $M_{ORR}/IrO_2$/DL electrodes were prepared via two sequential steps: anodic electrodeposition of $IrO_2$ on various DLs and fabrication of $M_{ORR}$ layers (Pt, Pd, and Pt-Ru) by spraying on $IrO_2/DL$. Experiments using different DLs, with Pt as the $M_{ORR}$, revealed that the roughness factor of the DL mainly determined the electrode performance for both water electrolyzer (WE) and fuel cell (FC) operations, while the contributions of porosity and substrate material were insignificant. When Pt-Ru was utilized as the $M_{ORR}$ instead of Pt, WE performance was enhanced and the electrode performance was assessed by analyzing round-trip efficiencies (${\varepsilon}_{RT}$) at current densities of 0.2 and $0.4A/cm^2$. As a result, using Pt-Ru instead of Pt alone provided better ${\varepsilon}_{RT}$ at both current densities, while Pd resulted in very low ${\varepsilon}_{RT}$. Improved efficiency was related to the additional catalytic action by Ru toward ORR during WE operation.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.318-328
• /
• 1991

The present paper describes the experimental study on the fixed-type wave-energy conversion system, consisting of the OWC-type wave-energy absorbing chamber and the duct for the air turbine. For simplicity, a screen of wire mesh was employed in place of an air turbine in order to simulate its effects on OWC chamber. Experiments were performed at the towing tank in regular waves with the frequency range of 0.22-0.75Hz. Comparison wish the numerical prediction using a potential flow-based method [4] was made to validate the capability of numerical code. It was shown that the agreements between measured and calculated results are quite good, giving a confidence in prediction method. Simulation of air turbine using a wire-mesh screen was successful, at least in a qualitative sense, to investigate the inter action between the OWC chamber and an air turbine. Results also showed that the effects of a wire-mesh screen on chamber efficiency are negligible, and the present model can be effectively utilized for the practical use in ocean waves with the frequency range under 0.3Hz.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.1
• /
• pp.15-19
• /
• 1988

Heat energy distribution forming net radiation above corn canopy was determined by means of the Bowen ratio-energy balance method. Total-global solar radiation above crop canopy during the growing season was $1,559MJm^{-2}$ and total latent heat flux density was $960MJm^{-2}$. The data showed that 61.6% of the global solar radiation was used for a heat source of evapotranspiration (ETa) above corn canopy. Mean daily ETa ranged from 2.7 to 5.6mm. Total ETa, total drymatter, and water use efficiency were 394mm, $2,214gm^{-2}$, and $5.6gm^{-2}mm^{-1}$, respectivively.