• 제목/요약/키워드: Water soluble silicate

검색결과 39건 처리시간 0.031초

방화피복재 개발을 위한 용해성 규산염의 수화특성에 관한 연구 (A Study of Hydration Characteristics on Soluble Silicate to Develop Fire Protective Coating)

  • 김정훈;이내우
    • 한국안전학회지
    • /
    • 제11권1호
    • /
    • pp.90-98
    • /
    • 1996
  • In order to investigate the effects on intumescence to fire protective coatings, the characteristics of solubility, hygroscopic nature and X-ray diffration results on soluble silicate were determined. Solubility is depended on the mutual action of each silicate. In the result of hygroscopic characteristics by water absorption under several kinds of relative humidity, lithium silicate is more stable than sodium and potassium silicate over moistures. Eventhough free water is evaporated over $100^{\circ}C$ , physically adsorption water and ionic water are eliminated about $200^{\circ}C$, but evolution of structural water is expected to be emitted between 400~$600^{\circ}C$ range. Those are considered to be contributed intumescence on soluble silicate.

  • PDF

알칼리 규산염 내화 피복제의 개발 (A Development of Fire Protective Coating Based on Soluble Alkali Silicate)

  • 이내우;김종래;김정훈
    • 한국안전학회지
    • /
    • 제8권2호
    • /
    • pp.30-38
    • /
    • 1993
  • To increase fire proofing characteristics of protective coating based on soluble alkali silicate, silicate coatings were studied on thermal properties, IR spectroscopy, solubility and intumescence. Intumescence and solubility of the samples were dependent on the strength of cationic cross-links between polysilicate particles. The degree of intumescence and solubility decrease K-silicate > Na-silicate > Li-silicate in the order. Especially Si$_2$O$_{5}$ $^{-2}$ crystalline regions were found to exist in Potassium silicate sample. Mixture of two kinds of silicate, for example, Lithium silicate when added to sodium silicate or potassium silicate was find to significantly reduce efflorescence and increase water resistance. This appears to be a result of stronger crosslinking between polysilicate particles by the small lithium cation.

  • PDF

CHARACTERISTICS OF FIRE PROTECTIVE COATING THE TERNARY SOLUBLE SILICATE

  • Lee, Nae-Woo;Choi, Jae-Wook;Kim, Jeong-Hun
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
    • /
    • pp.120-129
    • /
    • 1997
  • The fire protective coating can reduce certain damages in case of fire, also conserve energy by thermal insulation and prevent corrosion and errosion in normal daily life by means of blocking thermal transfer, that were generally made of organic, inorganic and metallic materials as adiabatic coating. In case of inorganic material such as soluble silicate, it produces less toxic substances which are exposed to Ore, and have a plenty of raw material. Also inorganic thermal insulator is good in heat resistance. To develope such a excellent inorganic thermal insulator, the study of fire protective coating using the alkali silicate is necessary The principle of intumescence for alkali silicate is from rapid evolution of water in the coating material, the quantity of water in it is of course influenced on the degree of intumescence. The phenomenon of intumescence in ternary silicate is increased as the radius of ion is bigger, and this is caused by evolution of so many kinds of water. The individual degree of intumescence is ordered like this ; $K^+$ > $Na^+$ > $Li^+$ . The best protection effect is similarity found to intumescence of ternary silicate. The result of X-ray diffraction analysis indicates that $KHSi_2O_5$ is an important ingredient in K-silicate.

  • PDF

수용성 규산염 시용에 따른 한국잔디의 생육효과 (Effect of Water Soluble Silicate on Zoysiagrass Growth)

  • 한정지;이광수;박용배;최수민;양근모;배은지
    • Weed & Turfgrass Science
    • /
    • 제4권2호
    • /
    • pp.144-150
    • /
    • 2015
  • 규산질 비료는 잔디에 있어서 생육과 밀도 향상 효과가 인정되고 있다. 대부분 슬래그 규산질 비료를 사용하고 있지만 최근에는 수용성 규산염을 원료로 한 규산질 등이 개발되어 시판되고 있다. 본 연구에서는 수용성 규산염에 대한 연구가 미흡한 실정으로 수용성 규산 시용에 따른 한국 잔디의 생육과 토양화학성 변화를 알아보고자 수용성 규산($SiO_2$) 함량별 처리 후 와그너포트 시험과 잔디 재배지 포장시험을 수행하였다. 수용성 규산 무처리구에 비해 수용성 규산 함량이 높을수록 근장, 지상부와 포복경의 생체중과 건물중, 한국잔디의 밀도가 유의성 있게 증가하였으며, 식물체내 조규산 함량은 유의하게 증가하였으나 토양 화학성에는 유의한 차이가 없었다. 수용성 규산 함량 18과 $36{\mu}lml^{-1}$ 처리구간의 유의한 차이가 크지 않아 적정 수용성 규산 함량은 $18{\mu}lml^{-1}$으로 판단되었고, 식물체 내 조규산의 공급원으로서 수용성 규산을 토양에 직접시비보다는 엽면시비로 한국잔디의 생장에 기여할 수 있을 것으로 판단된다.

논토양에서 규산질비료 시용이 토양 환경에 미치는 영향 (Assessment of Silicate Fetilizers Application Affecting Soil Properties in Paddy Field)

  • 주진호;이승빈
    • 한국토양비료학회지
    • /
    • 제44권6호
    • /
    • pp.1016-1022
    • /
    • 2011
  • 본 연구는 논 토양에서 규산질 비료의 성상이 다른 두 종의 규산질 비료의 토양 시비를 통한 토양의 화학적 특성 변화와 벼의 화학적 영양 성분을 평가하고자 수행하였다. 강원도 춘천시 소재 논 토양에서 두 종 (슬래그를 이용한 입상 규산질 비료와 수용성 입상 규산질 비료)의 규산 처리 수준에 따른 토양환경 변화를 보기 위해 무처리와 관행시비, 처리 기준의 0, 1, 2, 4배 처리 후 토양 화학적 변화를 고찰하였다. 슬래그를 이용한 규산질 비료의 처리 시 토양 pH는 시험 전 토양 pH에 비하여 상승하였으나 수용성 규산염을 원료로 한 규산질 비료의 처리 시에는 pH의 변화가 나타나지 않았는데 이는 수용성 규산염의 처리 양이 적고 가수분해율이 적기 때문인 것으로 판단된다. 슬래그를 이용한 규산질 비료를 처리한 구의 토양 유효규산 함량은 15일과 35일까지는 슬래그를 이용한 모든 규산질 비료 처리 구에서 증가하였다. 하지만 처리 60일 후부터는 유효규산 함량이 감소하는 것으로 나타났으나 수용성 규산염을 원료로 한 규산질 비료의 경우에는 토양 유효규산 함량의 증가가 대조구와 비교하여 볼 때 매우 적게 증가한 것으로 나타났다. 슬래그를 이용한 규산질 비료 처리구에서는 처리량에 관계없이 무처리 구에 비해 치환성 칼슘과 유효 인산 함량이 증가하는 것으로 나타났으나 최고 수준 (4배)의 처리구에서의 유효 인산 함량은 비례적으로 증가하지는 않았다. 슬래그를 이용한 규산질 비료 처리구에서의 볏짚의 규산 함량은 무처리구와 관행 처리구에 비해 모두 증가하는 것으로 나타났다. 즉, 규산질 비료를 처리함에 따라 규질비 ($SiO_2$/N)가 증가하였다. 관행 처리구와 슬래그를 이용한 규산질 비료 100% 처리시의 규질비는 각각 8.4와 11.5로 나타났다. 본 실험의 연구 결과를 통하여 슬래그를 이용한 규산질 비료의 토양시비는 토양의 화학적 성질 개선 및 수도 생육을 위해 바람직하나 수용성 규산질 비료의 경우에는 엽면 시비를 통한 액상 분무 등을 통하여 시비를 하는 것이 바람직하다고 판단된다.

Berberine hydrochloride의 흡착에 관한 연구 (Study on the adsorption of berberine hydrochloride)

  • 김용주;우종학;김신근
    • 약학회지
    • /
    • 제15권1호
    • /
    • pp.1-7
    • /
    • 1971
  • When a large quantity of insoluble drugs was added into a solution containing a small amount of soluble drugs, the latter was adsorbed to the former. Their adsorption was expected to alter the drug activity. Berberine hydrochloride (BH) was selected as a soluble drug and tested with frequently combined insoluble drugs and antacids for their adsorption phenomena in prufied water, gastric and intetinal fluid test solutions, respectively. The adsorption isotherms of kaolin and natural anuminum silicate with BH in the three media fitted the Langmuir (LM) equation, and that of talc in purified water and gastric fluid fitted it, but in intestinal fluid it fitted the Freudlich quation. The adsorption isotherm of aluminum hydroxide fitted the LM equation only in intestinal fluid. The degree of adsorption of BH in purified water and gastric fluid is in the following order: magnesium trisilicate, kaolin, natural aluminum silicate and talc; in intestinal fluid: magnesium trisilicate, kaolin, talc, natural aluminum silicate and aluminum hydroxide. Magnesium stearate did not adsorb BH.

  • PDF

치과용(齒科用) CEMENT의 용해도(容解度)에 관(關)한 실험적(實驗的) 연구(硏究) (An Experimental Study Concerning the Solubility of Dental Cements)

  • 이선국
    • 대한치과보철학회지
    • /
    • 제9권1호
    • /
    • pp.41-45
    • /
    • 1969
  • A major disadvantage of Dental cements is their solubility. So it is very important to measure the exact amount of solubility to select clinically suitable materials. The most common laboratory test for solubility is the measurement of disintegration in distilled water, as outlined in A.D.A. Specifications 8 and 9, In addition to the possible factors influencing the solubility, the experiments were all conducted in compliance with A.D.A. Specifications. The solubility of 2 Zinc Phosphate cements and 1 Silicate cement in time of dissolution, concentration of solute in dissolving medium, and type of dissolving medium were investigated. The following results were obtained. 1. Generally the materials were more soluble in organic acids than in distilled water. 2. The dissolution cements tends be minimized by tests utilizing prolonged storage in the same media. 3. In Acetic acid solution, Zinc Phosphate cements were more soluble than Silicate cement, and in Citric acid solution both were markedly more soluble. 4. Solubility was increased by continually presenting fresh liquid, unsaturated with solute, to the cement-water interface.

  • PDF

수용성 규산나트륨의 물리 · 화학적 특성 (Physical and Chemical Properties of Soluble Sodium Silicate)

  • 하윤식;박경일;서무룡
    • 대한화학회지
    • /
    • 제43권2호
    • /
    • pp.172-181
    • /
    • 1999
  • 수용성 규산나트륨 빌더를 개발하기 위하여 물유리와 수산화나륨을 적정비율로 혼합한 후 메탄올에 분산시켜 $SiO_2/Na_2O$의 몰 비율이 2.4∼2.8인 무정형 규산나트륨 고체분말을 제조하였다. 이때 규산나트륨의 $SiO_2/Na_2O$의 몰비, 용해도, thermogram, SEM, BET 등을 통하여 그 물리적 특성을 조사하였으며 빌더로서의 기본적인 특성을 규명하기 위해 $SiO_2/Na_2O$의 몰비가 1.0, 2.4, 2.8인 규산나트륨 빌더와 제올라이트를 사용하여 pH 유지능력, 온도에 따른 칼슘이온 결합능, 계면활성제 흡착능 등을 조사하였다. 그 결과 수용성 규산나트륨 화합물이 세제용빌더로서 가져야할 특성인 pH 유지능력 및 용해도에 있어서 제올라이트 보다 우수한 성능을 나타냈으나 칼슘이온 결합능 및 계면활성제 흡착능은 낮게 나타났으며, 규산나트륨의 $SiO_2/Na_2O$의 비율이 증가할수록 pH 유지능력과 이온교환능력은 감소하지만 계면활성제 흡착능력은 다소 증가함을 알 수 있었다.

  • PDF

3성분계(Li/Na/K) 용해성 규산염을 이용한 방화피복재의 개발 (A Development of Fire Protective Coatings using Ternary(Li/Na/K) Soluble Silicate)

  • 이내우;김정훈
    • 한국안전학회지
    • /
    • 제10권1호
    • /
    • pp.28-34
    • /
    • 1995
  • To improve fire proofing characteristics of protective coating using ternary soluble silicate from two component mixture, the method of reducing solubility, increasing intumescence and protection time have been studied. Intumescence and solubility of ternary silicate mixtures were dependent on many kinds of water release and the strength of cation cross-links between polysilicate particles. Especially the effect of additive, for example, corn starch was investigated. However the solubility of ternary mixture is decrease in order of Na$^{+}$ >K$^{+}$ >Li$^{+}$, and the magnitute of intumescence is increased $K^{+}$ >Na$^{+}$ >Li$^{+}$.}$ +/.

  • PDF

Improvement of Strength and Chemical Resistance of Silicate Polymer Concrete

  • Figovsky, Oleg;Beilin, Dmitry
    • International Journal of Concrete Structures and Materials
    • /
    • 제3권2호
    • /
    • pp.97-101
    • /
    • 2009
  • It has been known that acid-resistant concretes on the liquid glass basis have high porosity (up to 18${\sim}$20%), low strength and insufficient water resistance. Therefore they can not be used as materials for load-bearing structural elements. Significant increasing of silicate matrix strength and density was carried out by incorporation of special liquid organic alkali-soluble silicate additives, which block of superficial pores and reduces concrete shrinkage deformation. It was demonstrated that introduction of tetrafurfuryloxisilane additive sharply increases strength, durability and shock resistance of silicate polymer concrete in aggressive media. This effect is attributable to hardening of contacts between silicate binder gel globes and modification of alkaline component owing to "inoculation" of the furan radical. The optimal concrete composition with the increased strength, chemical resistance in the aggressive environments, density and crack resistance was obtained.