• 멤브레인
• /
• 제31권4호
• /
• pp.275-281
• /
• 2021

알칼리 수전해용 격막으로 사용가능성을 평가하기 위해 5종류의 상용 음이온교환막의 열적안정성, 이온전도도, 내구성을 평가하였다. TGA (thermo-gravimetric analysis)로 분석한 열적안정성은 FAAM-PK-75와 FAAM-40 막이 다른 3종류의 AEM, AHO, AHA 막과 비교하여 좋은 성능을 보였다. 25℃와 80℃, 7 M KOH 수용액에서의 이온전도도는 AEM막이 다른 막과 비교하여 약 4~17배 높은 값을 보였다. 25℃, 7 M KOH 수용액에서 측정한 내구성은 FAAM-PK-75막이 다른 막과 비교하여 안정하였다.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.330-336
• /
• 2022

In order to evaluate the possibility as a separator in alkaline water electrolysis, the high temperature characteristics were evaluated by measuring the membrane resistance and durability of 5 types of commercial anion exchange membranes in 7 M KOH solution and at 80℃. The membrane resistance of AEM membrane measured in 7 M KOH solution and at 80℃ had a lower value of about 8-24 times compared to the other membranes. The durability of AEM membrane tested with the soaking time in 7 M KOH solution and at 80℃ showed a very good stability and that of FAAM40 and FAAM75-PK showed secondly a good stability. The thermal stability with the soaking time in 7 M KOH solution and at 80℃ of FAAM40 and FAAM75-PK membrane analyzed by thermo-gravimetric analysis showed a good stability compared to the other membranes.

• 방사성폐기물학회지
• /
• 제7권3호
• /
• pp.175-182
• /
• 2009

유동층 비중차 분리기를 이용하여 혼합 폐 이온교환수지에서 폐 양이온수지와 폐 음이온수지로 분리하였으며, 원소분석과 열분석으로 분리가 잘 되었음을 확인하였다. 비중차 분리를 통해 얻은 수백 미크론의 구형 알갱이 형태의 폐 양이온수지와 폐 음이온수지 각각을 볼밀로써 24시간 습식 분쇄하여 적정 입도 이하의 입자가 균일하게 분산된 고농도 슬러리를 얻은 다음, 희석하여 $COD_{cr}$, 농도 25,000ppm의 시료를 준비하였다. 실험실 규모의 소형 초임계수산화(Super Critical Water Oxidation, SCWO) 장치(반응기 용량 : 220 mL)로써 화력발전소에서 발생한 폐 양이온수지와 폐 음이온수지에 대해 최적의 분해조건을 확립한 다음, 파일럿플랜트(반응기 용량 : 24 L)로 scale-up 실험을 수행하였다. 우선 화력발전소의 폐수지로서 파일럿테스트를 실시한 다음, 원자력발전소의 폐수지로써 파일럿테스트를 수행하여 최적의 분해조건을 설정하였다. 실험실 규모의 소형 SCWO 장치와 파일럿플랜트의 설계 및 운전에서 얻은 경험을 바탕으로 원자력발전소 내에 설치 가능한 규모로 상용설비(처리용량 : 150kg/h)를 설계 중에 있다.

• 상하수도학회지
• /
• 제29권2호
• /
• pp.203-209
• /
• 2015

The purpose of this study is to estimate the applicability of a stable anaerobic digester using a separator membrane to the preprocessing thickening process. The results of the experiments showed about a 47.16% weight loss rate for the sludge under anaerobic condition, and about 41.17% under intermittent aeration condition. The concentrations of rejection water were $SCOD_{Cr}$ 25 mg/L, T-N 16.6 mg/L, and T-P 1.4 mg/L on the average under the intermittent aeration condition, which were lower than the concentrations of rejection water under an anaerobic condition. As for the factors affecting the reduction of the flux, correlation analyses of TTF, MLSS, $SCOD_{Cr}$, and $EPS_{Protein}$, $EPS_{Polysacchride}$ resulted in -0.97, -0.95, -0.84 and -0.86, -0.95, respectively, which showed that TTF had the highest correlation to the reduction of the flux. In addition, it was concluded that MLSS, $SCOD_{Cr}$ and $EPS_{Protein}$, $EPS_{Polysacchride}$ also have close correlations. The results are considered to show that, in the case of the process using a tubular membrane in the preprocessing process of an anaerobic digester, an intermittent aeration condition of the thickener considering the contamination of the membrane and load of rejection water is appropriate for the stable preprocessing process.

• 폴리머
• /
• 제34권2호
• /
• pp.126-132
• /
• 2010

메탄올 용매에서 고분자 촉진 단량체와 소디윰 스티렌 슐포네이트를 방사선 그래프트 방법으로 양이온 교환 PVdF 맴브레인을 제조하였다. 고분자 촉진 단량체로서 스티렌, 아크릴산, 비닐 피롤리돈을 사용하였다. 또한, 음이온 교환 PVdF 맴브레인도 방사선 그래프트 중합법에 의해 제조하였다. 양이온 및 음이온 교환 PVdF 맴브레인은 SEM, XPS 그리고 열분석기기를 통해 특성평가를 하였고 성공적으로 합성됨을 확인할 수 있었다. 그래프트 수율, 이온교환기의 양 및 침투율은 각각 30.0~32.3%, 2.81~3.01 mmol/g 그리고 66.6~147%로 평가되었으며, 20 $^{\circ}C$에서 이온 전도도를 측정한 결과 0.020~0.053 S/cm 이었다. 최종적으로, 제조된 양이온 및 음이온교환 PVdF 맴브레인은 전지격막으로서 충분히 사용될 수 있음을 확인할 수 있었다.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.598-607
• /
• 2004

In this study, the effects of two pre-treatment processes were observed prior to membrane filtration: pre-coagulation and pre-ozonation. To compare the effect of two above-mentioned pre-treatments, we adopted the four schemes: first one is direct membrane filtration of river surface water, second one is membrane filtration after pre-coagulation, third one is membrane filtration after pre-ozonation and fourth one is membrane filtration after pre-coagulation and pre-ozonation. There are two exceptional characteristics in applied processes. One is the usage of the MF membrane which has high ozone resisting characteristic. Therefore, ozone resides in membrane module during filtration. The other is adoption of Jet Mixed Separator (JMS) as coagulation-sedimentation process. The change in transmembrane pressure and permeate water quality were also examined. As a result, considering the filtration performance efficiency and permeate water quality, the process composed of filtration with combination of both pre-coagulation and pre-ozonation was proved most effective. The improved efficiency was due to the reduction of loading rate of fouling inducing materials to membrane module by coagulation process as well as variable reactions, such as degradation, particle destabilization and coagulation, occurred by residual ozone in membrane module. The additional effect of pre-coagulation before pre-ozonation is suppression of AOC, one of the by-products induced by ozonation. Therefore, combination of pre-coagulation and pre-ozonation is the effective process to overcome the major de-merit of ozonation i.e. by-products formation.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.102-107
• /
• 2013

In this paper, the performance analysis for evaporation capacity, total work and efficiency of the ocean thermal energy conversion(OTEC) power system using mixed refrigerant(R32,R152a) is conducted to find the effect of hot wasted water on OTEC power system. The system in this study is applied with two stage turbine, regenerator, cooler and separator on Organic Rankine Cycle. The commercial program HYSYS is used for the performance analysis. The main results were summarized as follows : The efficiency of the OTEC power cycle has a largely effect on the evaporation capacity and total work. As increasing temperature of heat source water, evaporator's capacity is decreased but total work increase. Otherwise, using hot wasted water bring effects not only increasing system efficiency but also declining evaporator's capacity. Thus With a thorough grasp of these effect, it is necessary to find way to use hot wasted water emitted by power plant and so on.

• 한국축산시설환경학회지
• /
• 제4권1호
• /
• pp.63-71
• /
• 1998

The dramatic increase in both swine and cattle production in Korea has presented problems related to protection of water resources. Animal wastes are a potentially valuable source of plant nutrients. Modern liquid waste management plans for a livestock housing need to focus on the slurry aeration and composting control methods and cost effective equipments. Recent developments in the animal manure liquid composting make it possible to improve the manure more easier to handle, reduce the odorous, labors and bedding materials, kill the weed seeds etc. However, there are some disadvantages, the aerator consumes much electrical power and initial cost is high. To solve these problems, this study is intended to develop a key points such as slurry aeration and dilution, liquid waste composting equipments.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.626-629
• /
• 2008

In this study, a geothermal power generation system using the Kalina cycle was investigated by the simulation method. The Kalina cycle system can be used for the utilization of a low-temperature heat sources such as geothermal and industrial waste heat that are not hot enough to produce steam. The sea/river water can be considered as a cooling media. A steady-state simulation model was developed to analyze and optimize its performance. The model contains a turbine, a pump, an expansion valve and heat exchangers. The turbine and pump were modelled by an isentropic efficiency, while a condenser, an evaporator and a regenerative heat exchanger were modeled by UA-LMTD method with a counter-flow assumption. The effect of the ammonia fraction at the separator inlet on the cycle performance is investigated in detail.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.25-28
• /
• 2003

베어링/실 시험설비 (BST)는 다양한 매체 (물, 액체질소, 액체산소)에서 액체로켓 엔진의 터보펌프를 위한 베어링과 실을 시험하기 위한 장비이다. 베어링 성능특성 시험은 베어링을 통과하는 냉각 유량과 축 방향 및 반경방향의 하중을 모사하여 시험이 수행된다. 실 시험의 목적은 실을 통과하는 누수량과 시간에 따른 누수량의 변화를 결정하기 위함이다.