• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권2호
• /
• pp.76-84
• /
• 2002

On-line conversion estimation of enzymatic esterification reactions in solvent-free media was investigated. In principle, conversion to ester can be determined from the amount of water produced by the reaction, because water is formed as a by-product in a stoichiometric manner. In this study, we estimated the water production rate only from some measurements of relative humidity and water balances without using any analytical methods. In order to test the performance of the on-line conversion estimation, the lipase-catalyzed esterification of n-capric acid and n-decal alcohol in solvent-free media was performed whilst controlling water activity at various values. The reaction conversions estimated on-line were similar to those determined by offline gas chromatographic analysis. However, when the water activity was controlled at higher values, discrepancies between the estimated conversion values and the measured values became significant. The deviation was found to be due to the inaccurate measurement of the water content in the reaction medium during the initial stages of the reaction. Using a digital filter, we were able to improve the accuracy of the on-line conversion estimation method considerably. Despite the simplicity of this method, the on-line estimated conversions were in good agreement with the off-line measured values.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.209-212
• /
• 2006

Line heating with water cooling is generally adapted process in the shipyards for the forming hull surface. The purpose of this paper is to develop a model of thermal deformation in water cooling process after the line heating. In order to simulate the cooling process, heat transfer analysis was performed by assuming the effects of water cooling as a negative heat-source. Experiment for the line heating with water cooling was performed for 9 models of plates in order to verify the cooling model. By using the suggested model for the water cooling process, it could be observed that the present method predict the plate deformations in the line heating more accurately.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.522-528
• /
• 2004

Microfiltration with in-line rapid coagulation for drinking water production was examined. The in-line rapid coagulation was conducted using newly developed mixing device instantaneous flash mixer. The flux decline during membrane filtration was monitored with coagulant dosage varied. Flux decline was minimized at 1.1mg/L of coagulant dosage, where streaming potential of coagulated water was near zero. The optimum dosage for the process control was explained by dimensionless distance (${\kappa}{\times}a$) of particle pairs, obtained from electrophoresis parameter describing electrostatic repulsion relative to Van der Waals energy between particle pairs in the pre-coagulated water.

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.17-23
• /
• 2019

This study monitored changes in the level of heterotrophic bacteria in the filtrate and investigated the effect of stagnant water on it, using a batch-operated, gravity-driven membrane system for household water treatment. The filtration test was carried out in the presence and absence of stagnant water in the filtrate line. The results showed that stagnant water accelerated the heterotrophic bacteria levels, measured by heterotrophic plate count, even though the heterotrophic plate count of the filtrate finally increased up to $10^5CFU/mL$ regardless of the presence of stagnant water. When the change in heterotrophic plate count of a batch was monitored over filtration time, heterotrophic plate count of the filtrate rapidly decreased within 5 min for each batch filtration. Biofilm formation on the filtrate line was observed in the presence of stagnant water. The biofilm fully covered the filtrate line and contained numerous microorganisms. During storage after filtration, heterotrophic plate count increased exponentially. To improve the filtrate quality of a filtration-based household water treatment system, therefore, the stagnant water in the filtrate line should be minimized, the filtrate produced at the first 5 min is recommended not to be used as potable water, and the storage of filtrate should be avoided.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1335-1340
• /
• 2013

Herein the water film was introduced to the hydrophilic area on the line patterned surface to solve the contradiction caused by surface roughness (high different wettability has advantage to control the droplet but high roughness for that high wettability difference causes obstruction of droplet moving). Thus the droplet on the water film could not be hindered to line direction but restricted to orthogonal direction, effectively. In addition, droplet behaviors according to droplet volume and line thickness were studied. Droplet fell off the line with narrowing the interface between the droplet and the water film on the line. When the droplet fell off the line, the plate angle was designated as a critical plate angle and it used as an indicator of surface capability to control the droplet. As a result critical plate angle increases as droplet volume decreases and line thickness increases.

• 수산해양기술연구
• /
• 제18권1호
• /
• pp.17-23
• /
• 1982

한국국적의 유조선 35척의 외판 및 격벽의 부식도를 선령별로 조사한 결과를 요약하면 다음과 같다. 1. 선령 12년급의 외판의 평균부식도는 경흘수선 및 하부 만곡부선에서는 선수부가, 건현 및 상부만곡부선에서는 중앙부가, 양재흘수선에서는 선미부가 가장 높다. 2. 선령 20년급의 외판의 평균부식도는 경흘수선 및 상.하부만곡부선에서는 선수부가, 건현중앙선에서는 중앙부가, 만재 흘수선에서는 선미부가 가장 높다. 3. 측수조와 중앙유조의 횡격벽의 평균부식도는 어느 선령에서나 정부선, 상부선, 중앙선에서는 측수조가 높고, 하부선과 저부선에서는 중앙유조가 높다. 4. 중앙유조와 양측 유조의 횡격벽부식도 어느 선령에서나 중앙유조의 횡격벽 쪽이 높다. 5. 중앙유조의 종.횡격벽의 부식도는 격벽의 중앙선상부에서는 어느 선령에서나 종벽부 쪽이 높다. 6. 내부수조 및 중앙유조의 횡격벽과 같은 높이에 있는 선각외판의 건현부의 평균부식도를 비교하면, 격벽상부의 부식도가 외판의 그것보다 크다.

• 한국환경복원기술학회지
• /
• 제14권3호
• /
• pp.57-69
• /
• 2011

This study examined the relationship between Phragmites australis' growth and sediment properties at mud tidal flat of Donggum-ri, Gilsang-myeon, Gangwha-gun, Incheon city. Field survey was carried out from May, 2010 to October, 2010. Water content, soil texture, electric conductivity and water table depth for sediment, density, height, dry weight and flowering for P. australis were examined at several plots from the starting point (the coastal embankment) to the end point of the two populations. The result was as follows. Firstly, the water table increased along distance from the embankment at one line (N-line) but was similar at the other line (S-line) in a P. asustralis population. Water tables were higher out of than within a P. australis population at two populations. Secondary, in N-line, the height and dry weight of P. australis decreased along the distance from embankment but, in S-line, those were similar in its population. P. australis' growth was dependent on electric conductivity at lower layer (water table level) rather than upper one (the surface). Thirdly, density of P. australis changed during growing season and was similar in a population, except for the end point of patch. In summary, the growth and distribution of P. australis were dependent on salt content of tidal flat's sediment (water table level) and this was affected by fresh water of the inland.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.119-124
• /
• 2004

A water hammer mostly comes out when a valve fixed at the downstream end of the pipe-line system is rapidly closed or opened. A simple phenomenon of water hammer is often caused around us, and this phenomenon imperils the pipe systems occasionally. In this paper, we confirmed the phenomenon of water hammer by an experiment and forecasted a change of pressure in the pipe-line system by a numerical method. Also a vibration response, which is caused by water hammer, of the pipe-line system confirmed by an experiment and analyzed by a numerical method.

• 한국농공학회지
• /
• 제11권3호
• /
• pp.1742-1748
• /
• 1969

This is a method to determine the boundary line of reservoir flooding area which will be purchased. Until now, flood water level was used as the boundary line. By lowering this line from flood water level, purchasing cost of reservoir flooding area can be cut down. Sometimes, temporary flooding of arable land outside the boundary occurs. During the life of reservoir, flood damage to crop product on of this land must be indemified with net berefit from arable land between the bovndary line and normal water level. Following is the basic formula to determine the line. (Estimated flood damage to crop production of land outside the boundary line $\leqq$ Estimated net beneift from land between the boundary line and normal water level.) Minimum difference between both sides is needed to minimize the purchasing area. Flood damage and net benefit are estimated by hydrologic estimation with rainfall data and crop production estimation.

• 대한환경공학회지
• /
• 제35권2호
• /
• pp.75-83
• /
• 2013

본 연구는 기존의 고상추출(SPE) 과정을 분석장비인 LC/MSD에 on-line으로 연결함으로써 cartridge의 건조를 막아 target 물질의 손실을 최대한 억제하였으며 11종의 PFCs에 대해 실제 matrix가 있는 낙동강 원수를 이용한 실험에서 $80.4{\pm}5.2%{\sim}109.5{\pm}1.4%$ 범위의 높은 회수율을 구할 수 있었다. 낙동강에서의 PFCs 분포를 조사한 결과 하수처리장 방류수의 영향을 받는 지역(진천천과 금호강 하류)은 고농도의 PFCs가 검출되었으며, 낙동강 하류의 매리원수에서는 검출농도가 급격히 감소하여 PFOA만 8.0 ng/L의 농도로 검출되었다. 외국의 PFCs 검출현황을 보고한 연구결과들과 비교해 볼 때 낙동강 지류에서는 비교적 높은 농도로 PFCs가 검출되어 안심할 수 있는 수준은 아니었으며, 낙동강 본류의 경우도 여러 지역의 상수원으로 이용되기 때문에 주기적인 모니터링이 필요한 것으로 나타났다.