• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.63-69
• /
• 2015

The aim of this study was to investigate the deformation of packaging materials used for ready-to-eat (RTE) foods after the retort process and microwave heating. From the multilayer films consisting of polyethylene terephthalate (PET), polyamide (PA), and cast polypropylene (CPP) in a stand-up pouch form used for RTE foods, some deformation of the CPP layer, which was in direct contact with the food, was observed after the retort process and microwave heating. The damage was more severely caused by microwave heating than by the retort process. This may be attributed to diverse factors including the non-uniform heating in a microwave oven, the sorption of oil into the packaging film, and the different characteristics of food components such as viscosity, salt and water content. The development of heat-resistant packaging materials and systems suitable for microwave heating of RTE foods is required for the safety of consumers.

• Composites Research
• /
• v.30 no.2
• /
• pp.84-93
• /
• 2017

This study investigates thermal and mechanical characterization of environmental barrier coating on the $SiC_f-SiC$ composites. The spherical environmental barrier coating (EBC) powders are prepared using a spray drying process for flowing easily during coating process. The powders consisting of mullite and 12 wt% of Ytterbium silicate are air plasma sprayed on the Si bondcoat on the LSI SiC fiber reinforced SiC composite substrate for protecting the composites from oxidation and water vapor reaction. We vary the process parameter of spray distance during air plasma spray of powders, 100, 120 and 140 mm. After that, we performed the thermal durability tests by thermal annealing test at $1100^{\circ}C$ for 100hr and thermal shock test from $1200^{\circ}C$ for 3000 cycles. As a result, the interface delamination of EBC never occur during thermal durability tests while stable cracks are prominent on the coating layer. The crack density and crack length depend on the spray distance during coating. The post indentation test indicates thermal tests influence on the indentation load-displacement mechanical behavior.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.519-528
• /
• 2019

In 2017, Korea Institute of Geoscience and Mineral Resources (KIGAM) has excavated a trench at Yongjang-li in the city of Gyeongju to examine the evidence of fault movement related with the 2016 earthquake in unconsolidated sediments. In the trench profile, the author has observed the features of ongoing soil-forming processes and groundwater movement overlapped on the sedimentary layers. The soil formation was in its initial stage, and most of the original sedimentary layers could be observed. The color changes depending on the redox conditions and by the Mn/Fe oxide precipitation, however, were the most significant features obscuring sedimentary records. The dark Mn oxide precipitates formed at the groundwater levels often concealed the sedimentary unit boundaries. The groundwater levels varied depending on the particle sizes of the sedimentary layers contacting the groundwater, and the Mn oxide precipitates have formed at varying depths. The groundwater could move upward along the narrow pores in the fine-textured sedimentary layer more than a few meters showing the gray color indicating a reducing condition for iron.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.1
• /
• pp.187-202
• /
• 1989

This study was undertaken to investigate the effect of indomethacin on prostaglandins in 4-Nitroquinoline-N-Oxide (4-NQO) induced palatal carcinoma of albino rats. 128 Sprague-Dawley strain albino rats-about 100g in body weight-were used in this study, divided into as belows; 1. Normal group (16-albino rats) with no treatment, 2. Control group (16-albino rats) treated with prophylene application onto palatal mucosa 3 times a week. 3. Experimental group I (48-albino rats) treated with 0.5% 4-NQO in prophylene application onto palatal mucosa 3 times a week. 4. Experimental group II (48-albino rats) treated with 0.5% 4-NQO in prophylene application with administered $20{\mu}g/ml$ of indomethacin in drinking water ad. lib. Four animals were sacrificed 7th, 13th, 19th, and 25th week respectively in normal and control group, and 7th, 9th, 11th, 13th, 15th, 17th, 19th, 21st, 23rd, 25th, 27th and 29th week respectively in experimental group I and II at each time. The palatal and lingual tissues were excised and kept frozen at $-70^{\circ}C$. Densitometer scan and Beta-counting counter were used for the thin layer chromatography of the arachidonic acid metabolites. The obtained results were as belows; 1. In normal and control group, there was little change of the arachidonic acid metabolites during experiment period, and the tissue homogenates included prostaglandin $D_2$, 6-keto-prostaglandin $F_{1{\alpha}}$, prostaglandin $E_2$, thromboxane $B_2$, prostaglandin $F_{2{\alpha}}$ in that order of relative abundances. 2. In experimental group I, prostaglandin $D_2$, and prostaglandin $E_2$ were increased, while 6-keto-prostaglandin $F_{1{\alpha}}$ and thromboxane $B_2$ were decreased in relative abundances of arachidonic acid metabolites. And there was little change in prostaglandin $F_{1{\alpha}}$ 3. In experimental group II, prostaglandin $D_2$, and prostaglandin $E_2$ were increased, while 6-keto-prostaglandin $F_{1{\alpha}}$ and thromboxane $B_2$ were decreased in relative abundances of arachidonic acid metabolites. And there was little change in prostaglandin $F_{2{\alpha}}$ also. 4. In the range of increase in prostaglandin $D_2$, and prostaglandin $E_2$, and that of decrease in 6-keto-prostaglandin $F_{1{\alpha}}$ and thromboxane $B_2$, in relative abundances, there was wider in experimental group I than in group II. 5. In the range of increase in prostaglandin $D_2$, and prostaglandin $E_2$, and that of decrease in 6-keto-prostaglandin $F_{1{\alpha}}$ and thromboxane $B_2$, in relative abundances, there was wider in palatal mucosa than in lingual mucosa in experimental group I and II.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.3
• /
• pp.47-56
• /
• 2001

In the present study, mainly to determine the embarkation time of equipment in dredged clay fills, an analytical approach is performed to predict a variation of the undrained shear strength in the outermost layer. In this approach, Gibson's non-dimensional linear constant defining the relationship between the void ratio and the effective stress is employed. Also in this approach, void ratios and settlements associated with the volume change due to the self-consolidation and the desiccation shrinkage are evaluated at various elapsed times based on the finite difference solution technique proposed by the authors(1999) and the developed computer program named as DSCON. Predicted results(water content ratio, unit weight and undrained shear strength) are compared with those of laboratory model tests conducted with soil samples obtained from the Koheung site. Based on the predicted undrained shear strengths, possible embarkation time of a equipment is also evaluated. In addition, further analyses are made to indirectly verify the efficiency of the analytical approach proposed in the present study using the PSDDF computer program which can consider the drainage efficiency.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.5-13
• /
• 2009

The runoff-reducing facilities using infiltration was considered for the sustainable and sound water management. However, for practical utilization, many problems are attended and therefore effort on improvements are required. In this study, methods of improvement for infiltration facilities proposed by Infiltration-Storage System (ISS) and the effect of runoff reduction were analyzed by hydraulic experimental study. In order to analyze the infiltration characteristics of proposed runoff reduction facilities in this study, it was applied to various rainfall condition and surface material considering development and urbanization influences. As a results of hydraulic model experiment, Infiltration-Storage System (ISS) made addition to effect of reduction by lower layer of accumulative infiltration quantities. And then as rainfall-intensity was increased, accumulative infiltration rates were increased in this study. Thus, Infiltration-Storage system (ISS) was more efficient than existing runoff reduction facilities because of increasing infiltration rate. Such a result was guaranteed application of ISS as runoff-reducing facilities. Therefore, ISS is expected to be capable for practical application if subsequent research for improvements are followed. Additionally, results of this study are expected to provide fundamental research data on infiltration facilities.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.263-272
• /
• 1999

Slice method is commonly used in solving slope stability problems since it is easy to use and its computation time is rather short. But depending upon the assumptions on the inter-slice forces, different methods are available. Quite often the difference between methods are so big that it is very difficult to make engineering decisions. This paper describes a method to calculate the factor of safety of a slope using FLAC, a finite difference based program. A FISH routine is developed to calculate the factor of safety, and verified by comparing with Chen's limit equilibrium solution. An example problem was selected from Fredlund and Krhan's paper, and results were compared for different soil and water conditions. The difference was less than 0.01 when the soil is homogeneous, and less than 5 % when a weak layer is embedded. Since most geotechnical application programs are capable of considering complicated ground conditions as well as the effect of ground supports, numerical methods are believed to be very useful in making engineering decisions. The developed routine can be applied to the calculation of the factor of safety of jointed rock slopes or weathered rock slopes where the use of slice method is limited.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.145-152
• /
• 2003

Capacitance of a hybrid capacitor that has characteristics of both electrolyte capacitor and supercapacitor is determined by anode surface covered with oxide layer. In this study, optimal condition processes for anode to fabricate a high voltage hybrid capacitor was investigated. We mixed aluminum powder having mean particle size of $40{\mu}m$ with NaCl powders at weight ratio of 4 : 1 and prepared a disk type electrode after annealing at various temperature. After dissolving NaCl in $50^{\circ}C$ distilled water, heat treatment, eletropolishing, chemical treatment, and the first and the second etching of Al disk were conducted. In each process, capacitances and resistances of the disk measured by ac-impedance analyzer were compared to find its optimum treatment condition. Also, the surface morphology of treated disks were observed and compared by SEM. After the second etching, the Al disk was anodized at 365V to make an anode of hybrid supercapacitor that can be operated at 300V, Capacitance and resistance of the anodized Al disk electrode was compared with those of commercialized conventional aluminum electrolytic capacitor at different frequencies.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.117-128
• /
• 2016

Chemical reaction tests were performed to assess the properties of hardened specimens of cement pastes (KS-1 Portland and Class G) exposed to supercritical CO₂ for 1, 10, and 100 days. After exposure, the samples' measured permeability and strength were compared with values measured for pristine samples. The pristine cements had permeabilities of 0.009~0.025 mD, which increased by one order of magnitude after 100 days of exposure (to 0.11~0.29 mD). The enhancement of permeability is attributed to the stress release experienced by the samples after removal from the pressure vessel after exposure. Despite its enhancement, the measured permeability mostly remained lower than the API (American Petroleum Institute) recommended maximum value of 0.2 mD. The degradation of the cement samples due to exposure to supercritical CO₂ led to a layer of altered material advancing inwards from the sample edges. The Vickers hardness in the altered zone was much higher than that in the unaltered zone, possibly owing to the increase in density and the decrease in porosity due to the carbonation that occurred in the altered zone. Hardness close to the edge within the altered zone was found to have decreased significantly, which is attributed to the conversion of C-S-H into less-strong amorphous silica.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.269-284
• /
• 2006

Aquifer responses to the river stage fluctuations were analyzed between the groundwater level and the river stage in an alluvial aquifer. The auto-correlation and cross-correlation as a time series analysis were applied. Study site is a floodplain in the Mangyeong river. Groundwater levels in each depth representing the silt and sand(SS), gravel and sand(GS), and weathered zone(WZ) layer were monitored. The groundwater levels were more sensitive to the river stage fluctuations than rainfall. Since the river stages are influenced by the gate operations downstream and tide, show periodic patterns, and the correlation coefficients with rainfall is low. Cross-correlation function between groundwater level in each depth do not show any delay time, then response time is very short to each depth. Cross-correlation analysis were performed to estimate the response time of groundwater levels to river stage fluctuations. Groundwater levels respond to the river stage within 30 minutes to 1 hour in wells near the stream. Short time lag between groundwater level and river stage indicates the quick response. A different response time imply the hydraulic inhomogeneity of the site, and a probable high permeability zone between river and aquifer can be inferred. Mangyeong-river in study site is a gaining stream normally, and river stage rising by gate operation or floods makes river water flow into groundwater. The auto-correlation and cross-correlation functions as a time series analysis can be a good tool to interpret the aquifer responses to stream stage fluctuation