• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.130-130
• /
• 2023

제트류는 다양한 크기와 운동량의 에디가 복잡하게 혼합되어 이루어져 있으며, 이를 정확하게 모델링하고 이해하기 위해서는 제트류의 다양한 특성들을 잘 반영하여 연구를 수행해야 한다. 다양한 연구 수행 방법 중 수치해석 방법은 상대적으로 공간 및 시간적 비용이 적게 들어서 널리 사용되고 있다. 이러한 수치해석 방법에는 DNS(Direct Numerical Simulation), LES(Large Eddy Simulation), RANS(Reynolds Averaged Navier Stokes) 등이 있으며, 그중 LES는 난류 모델링을 사용하는 RANS 방법에 비해 더욱 정확한 흐름 모델링을 제공하는 장점이 있다. 이러한 LES는 대규모 에디는 직접 해석하면서, 일정 크기 이하의 에디는 모델링을 사용해 해석하는 것이 특징이다. 하지만, LES를 사용하기 위해서는 적절한 그리드 크기를 결정하는 것이 중요하며, 이는 모델의 정확성과 연산 비용에 큰 영향을 미친다. 하지만, 여전히 적절한 그리드 크기를 결정하는 것은 어려운 문제이다. 이러한 LES 모델링을 사용할 때 적절한 그리드 크기를 결정하기 위해서는 정확한 시간 평균 속도 변동을 연구하는 것이 앞서 선행되어야 한다. 따라서, 본 연구에서는 기계학습 기반 접근 방식을 사용하여 난류 제트 내 시간 평균 속도 변동을 예측하는 연구를 진행하였다. 즉, 난류 제트 역학을 이해하는 데 중요한 파라미터인 시간 평균 유속을 이용하여 시간 평균 속도 변동을 예측하는 데 초점을 맞추었다. 모델의 성능은 평균 제곱 오차와 R-제곱 등 다양한 지표를 사용하여 평가되었다.

• 에너지공학
• /
• 제10권4호
• /
• pp.349-356
• /
• 2001

물과 증기의 직접접촉에 의한 응축 열전달은 움직이는 증기/물 경계면에서 열 및 물질 전달이 이루어지는 현상으로서, 매우 큰 열전달계수를 수반하는 특징이 있기 때문에 이를 응용한 설계가 산업계에서 광범위하게 이루어지고 있다. 본 연구에서는 단일 수평 배관을 통해 과냉각수가 있는 응축탱크로 안정된 증기제트가 방출될 때, 증기제트 형상을 예측하는 간단한 응축해석모델을 제시하였다. 해석모델은 축대칭 좌표계에서 질량, 운동량 및 에너지 방정식과 증기/물 경계면에서 의 응축 특성을 고려한 열평형 방정식을 사용하여 유도하였다. 증기/물 경계에서의 매우 큰 열전달율은 기존의 실험을 근거로 한 유효열전도계수에 의해 반영되었다. 해석결과는 실험결과와 비교하였고, 제시된 해석 모델은 실험에서 관찰된 바와 같이 증기 질량유속과 수조 온도가 증가할수록 증기제트 크기(반경 및 길이)가 증가하는 경향을 보였다.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.819-828
• /
• 2011

This research was done to clarify the cooling effect of water particles generated from a fountain. This effect is a one way to control the heat island effect of big cities. The result of this research was drawn by setting the jets of water in a certain height, and then studying the diffusion of water particles, which is affected by the size of the particles and the wind speed, and the cooling effect caused by the diffusion. 1) When a diameter of a water drop was 500 ${\mu}m$ and the wind speed was 2.0 to 6.0 m/sec, the water drop diffused 75 to 190m, and the water vapor spread over 175 to 440 m. As a result, there was more than $0.5^{\circ}C$ of cooling effect on the temperature in the atmosphere 130 to 330m around the water fountain. 2) When a diameter of a water drop was 750 ${\mu}m$ and the wind speed was 2.0 to 6.0 m/sec, the water drop diffused 65 to 150 m, and the water vapor spread over 160 to 405 m. Moreover, there was more than $0.5^{\circ}C$ of cooling effect on the temperature in the atmosphere 110 to 275 m around the water fountain. 3) After studying on the relationship between the diameter of water drop and the wind speed, and the diffusion of water particles and the range of the atmosphere that was cooled, a result could be drawn from the research that the smaller the diameter of the water vapor gets and the faster the wind speed becomes, the wider the water particles diffuse and the cooler the atmosphere around the fountain becomes. 4) This research further extrapolates that when the ordinary water(tap water, water from river and stream) is used in a fountain, the cooling effect of the air near the fountain can be approached similarly. If the seawater is used in a fountain, there is to be more to concern not only on cooling effect on the air, but also on other effects on surrounding environment generated by the salt in seawater.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.66-74
• /
• 2016

Concerning the numerical simulation of high-speed water jet with intensive cavitation this paper presents a practical compressible mixture flow method by coupling a simplified estimation of bubble cavitation and a compressible mixture flow computation. The mean flow of two-phase mixture is calculated by URANS for compressible fluid. The intensity of cavitation in a local field is evaluated by the volume fraction of gas phase varying with the mean flow, and the effect of cavitation on the flow turbulence is considered by applying a density correction to the evaluation of eddy viscosity. High-speed submerged water jets issuing from a sheathed sharp-edge orifice nozzle are treated when the cavitation number, ${\sigma}=0.1$, and the computation result is compared with experimental data The result reveals that cavitation occurs initially at the entrance of orifice and bubble cloud develops gradually while flowing downstream along the shear layer. Developed bubble cloud breaks up and then sheds downstream periodically near the sheath exit. The pattern of cavitation cloud shedding evaluated by simulation agrees experimental one, and the possibility to capture the unsteadily shedding of cavitation clouds is demonstrated. The decay of core velocity in cavitating jet is delayed greatly compared to that in no-activation jet, and the effect of the nozzle sheath is demonstrated.

• 한국분무공학회지
• /
• 제4권1호
• /
• pp.19-26
• /
• 1999

An experimental study of twin-fluid atomization for powder metallurgy has been conducted using a specially designed atomizer in which liquid is first spread into a thin sheet and then exposed on both sides to high-velocity air. Inner air jet worked for supplying liquid and outer air jets disintegrated liquid sheet. The first result of this study were confined to the effect of atomizing quality through experiments with water. The experimental data will be extend to include the influence of atomizing air velocities on mean particle size through experiments with molten material. An experimental equation on the relationship between SMD and the related parameters was taken out; $$SMD=0.00302\frac{{(\sigma_L\;\rho_L\;D_L)}^{0.5}}{\rho_A(V_1+1.155\;V_2)/2}(1+\frac{W_L}{(W_{A1}/3.33)+W_{A2}})+0.0148(\frac{{\mu_L}^2}{\sigma_L\;\rho_L})^{0.425} \;{D_L}^{0.575}(1+\frac{W_L}{(W_{A1}/3.33)+W_{A2}})^2$$.

• 한국항공우주학회지
• /
• 제45권6호
• /
• pp.447-454
• /
• 2017

난류 유동장으로 분사되는 두가지 형태의 액체 제트 (수평분사는 디젤연료와 수직분사는 물)의 액주 분열과 미립화 현상에 관한 이상(Two-phase) 유동에 대해 3차원 LES 수치해석을 수행하였다. 기체상태의 공기 유동은 오일러리안 해법을 사용하고, 액체 제트의 액적 추적은 라그랑지안 해법을 사용하여 기체-액체간 이상유동 해석을 수행하였다. 두 종류의 확률론적 분열 모델(Stochastic breakup model)을 사용하여 액적 분열을 모사하였으며, 액체제트의 침투깊이와 액적 분포(Sauter Mean Diameter)를 실험결과와 비교하여 미세하게 분열되는 액체 제트의 분열 현상에 대해 확률론적 분열 모델링의 적합성을 제시하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.119-125
• /
• 2004

Unsteady nonlinear wave motions on the free surface over a plane beach of constant slope are numerically simulated using a finite difference method in rectangular grid system. Two-dimensional Navier-Stokes equations and the continuity equation are used for the computations. Irregular leg lengths and stars are employed near the boundaries of body and free surface to satisfy the boundary conditions. Also, the free surface which consists of markers or segments is determined every time step with the satisfaction of kinematic and dynamic free surface conditions. Moreover, marker-density method is also adopted to allow plunging jets impinging on the free surface. The second-order Stokes wave theory and solitary wave theory are employed for the generation of waves on the inflow boundary. For the simulation of wave breaking phenomena, the computations are carried out with the plane beach of constant slope in surf zone. The results are compared with each other. The marker-density method is better then the hybrid method. Also they are compared with other existing experimental results. The Agreement between the experimental data and the computation results is good.

• 대한토목학회논문집
• /
• 제5권1호
• /
• pp.75-81
• /
• 1985

정지상태의 수역에서 연직상향으로 방류(放流)되는 평면부력(平面浮力)?의 발달과정(發達過程)흐름영역(領域)의 거동이 질량(質量), 운동량(運動量) 및 추적물보존(追跡物保存)의 적분방정식(積分方程式)에 의하여 해석된다. 이 해석은 밀도(密度)후르드수(數)와 핵(核)에 대한 퍼짐비 및 발달과정(發達過程)흐름영역(領域)의 길이를 포함한다. 발달과정(發達過程)흐름영역(領域)의 끝에서 중심선속도(中心線速度)는 특히 낮은 밀도(密度)후르드수(數)에서 부력(浮力)의 영향을 크게 받는다. 이 결과는 발달(發達)된 흐름영역(領域)의 해석(解析)에 필요한 초기조건(初期條件)을 제공한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1257-1262
• /
• 2014

The variances of atomization characteristics with the misalignment of injectors defined as the fraction of skewness for various angles of impingement and pressure conditions were studied using the doublet impinging injectors with a like-on-like arrangement. Water was used as simulant and the spray characteristics along with the changes in the skewness were analyzed using the methods of spray image photography. Experiment was carried for the impinging nozzles of orifice diameter of 1.2 mm within Reynolds numbers ranging from $9{\times}10^3-4.5{\times}10^4$ and the fraction of skewness considered for the experiment ranges from 0.0 to 0.9 at ambient temperature condition. Flat sheet with a distinct rim produced perpendicular to the plane of impinging jets goes ondisappear and sheet appears comparatively shorterwith the increase in fraction of skewness resulting the atomization of fluid droplet very close to impingement point with decrease in breakup length and increase in spray angle up to certain extent. The maximum allowable skewness was found as the result. The skewness up to the certain extent can be considered as the parameter to control the atomization characteristics of simulant inside the combustion chamberproviding the high economic performance of fuel and time.

• Nuclear Engineering and Technology
• /
• 제52권10호
• /
• pp.2230-2237
• /
• 2020

Self-priming venturi scrubber is one of the most effective devices used to collect aerosols and soluble gas pollutants from gaseous stream during severe accident in a nuclear power plant. The present study focuses on investigation of dust particle removal efficiency of the venturi scrubber both experimentally and theoretically. Venturi scrubber captures the dust particles in tiny water droplets flowing into it. Inertial impaction is the main mechanism of particles collection in venturi scrubber. The water injected into venturi throat is in the form of jets through multiple holes present at venturi throat. In this study, aerosols removal efficiency of self-priming venturi scrubber was experimentally measured for different operating conditions. Alumina (Al₂O₃) particles with 0.4-㎛ diameter and 3950 kg/㎥ density were treated as aerosols. Removal efficiency was calculated for different gas flow rates i.e. 3-6 ㎥/h and liquid flow rates i.e. 0.009-0.025 ㎥/h. Experimental results depict that aerosols removal efficiency increases with the increase in throat velocity and liquid head. While at lower air flow rate of 3 ㎥/h, removal efficiency decreases with the increase in liquid head. A theoretical model of venturi scrubber was also employed and experimental results were compared with mathematical model. Experimental results are found to be in good agreement with theoretical results.