• 대한환경공학회지
• /
• 제33권5호
• /
• pp.359-367
• /
• 2011

압력수 확산공정은 정수공정에서 응집제나 염소용해수를 고압의 압력수로 분사하여 혼합하는 공정이다. 본 연구의 목적은 압력수 확산공정에 대한 전산유체역학적(Computational Fluid Dynamics) 진단을 통해 투입한 약품의 완전 혼합거리 및 혼합 거리를 줄이기 위한 확산판의 크기와 설치거리를 도출하는 것이다. 진단결과 2,200 mm 대형관에 $5kg/cm^2$ 압력수를 50mm, 100 mm 분사관으로 분사할 경우 혼합이 완료되는 혼합거리는 4D였다. 혼합거리를 줄이기 위해 분사관 전방에 확산판을 설치할 경우 분사관이 50 mm일 때 0.1D 직경의 확산판을 분사관 전방 0.2D 거리에 설치하면 혼합거리를 3D로 줄일 수있다. 그러나 분사관이 100 mm인 경우는 확산판의 크기와 설치 거리와는 상관없이 확산판이 없는 4D보다 확산거리를 줄일 수 없는 것으로 진단되었다. 따라서 2,200 mm 관에 압력수를 분사하는 경우는 50 mm 분사관을 설치하는 것이 100 mm보다 훨씬 효율적인 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제47권6호
• /
• pp.719-728
• /
• 2015

Following the Fukushima accident, a special safety inspection was conducted in Korea. The inspection results show that Korean nuclear power plants have no imminent risk for expected maximum potential earthquake or coastal flooding. However long- and short-term safety improvements do need to be implemented. One of the measures to increase the mitigation capability during a prolonged station blackout (SBO) accident is installing injection flow paths to provide emergency cooling water of external sources using fire engines to the steam generators or reactor cooling systems. This paper illustrates an evaluation of the effectiveness of external cooling water injection strategies using fire trucks during a potential extended SBO accident in a 1,000 MWe pressurized water reactor. With regard to the effectiveness of external cooling water injection strategies using fire engines, the strategies are judged to be very feasible for a long-term SBO, but are not likely to be effective for a short-term SBO.

• 지구물리와물리탐사
• /
• 제10권4호
• /
• pp.353-360
• /
• 2007

본 연구에서는 담수 주입에 의한 해수침투 개선 가능성을 확인하기 위해 담수주입 현장 실증시험을 수행하였으며, 담수 주입 효과 및 거동 평가를 위해 시추공에서의 다채널 전기전도도 모니터링과 물리검층, 지표에서의 전기비저항 및 자연전위 모니터링을 수행하고 그 적용성을 평가하였다. 담수주입 전후 및 주입 기간 중 수행된 물리검층과 다채널 전기전도도 모니터링 결과 담수 주입에 따른 공내수 및 대수층의 전기전도도의 감소 양상과, 이러한 주입효과가 수개월 이상 지속됨을 확인할 수 있었다. 담수주입에 따른 지하수의 유동 탐지를 목적으로 한 자연전위 모니터링의 경우, 현장 기상 여건 및 비분극 전극의 장기간 활용에 따른 문제로 인해 의미 있는 결과를 얻지 못하였으나 전기비저항탐사 모니터링의 경우에는 주입 담수에 의한 영향이 주입정 주위의 전기비저항 증가 양상으로 관측되어 담수체 거동과 영향 반경을 확인할 수 있었다. 이로부터 담수주입에 의한 담수체의 거동 평가와 개선효과를 판단하는 방법으로서 지구물리 기법들이 효과적으로 적용될 수 있으며, 이러한 평가기술에 기반 한 최적설계가 이루어질 경우 담수주입기술이 해수침투 피해 개선을 위해 효과적으로 적용될 수 있을 것으로 판단된다.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.10-15
• /
• 2015

The water has been the suitable for the cooling medium until now. But the water as cooling medium seem to have the limit for high speed injection. The steam plastic molding injection use the steam as the medium when raise the mold temperature. The weld line has been the major quality problems in a plastic injection parts to be difficult to be solved. These problems in injection-molded plastic parts are difficult to find the reason because these issues are usually in tradeoff realtions with each other. The purpose of this paper is to obtain the optimum injection moulding condition for improving the quality of plastic injection parts and to inquire the productivity improvement with the measured cycle time by steam plastic moluding injection. Based on these numerical results, the guidelines of mould design and injection processing condition were established. As a result, the improvement of quality and the reduction of cycle time was achieved.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.273-277
• /
• 2005

The large particles of suspended matter in raw water can be removed by allowing them to settle out in a presedimentation basin. But there are smaller particles in almost all surface water and some groundwater that will not settle out within a reasonable time without some help to accelerate the process, In the coagulation and flocculation processes, nonsettleable solids are converted into large and heavier settleable solids by physical-chemical changes broght about by adding and mixing coagulant chemicals into the raw water. The object of this research was to improve corrective injection method for low dissolution liquid in the water treatment plant. A sort of chemical feed equipment are diaphram pump, flow control in combined magnetic flowmeter md control valve, roto dipper wheel system and tube pump. Particularly low dissolution liquid (Calcium Hydroxide) put in a bit by feed equipment, tube pump is very useful method for corrective injection method in the water treatment plant.

• 한국화재소방학회논문지
• /
• 제13권3호
• /
• pp.27-33
• /
• 1999

미분무수를 이용한 개인용 컴퓨터 화재진압 실험이 수행되었다. 분무가 없는 연소실험에서는 측정된 온도에 의해 화재확대 경로가 분석되었다. 소화실험에서는 미분무수의 작용에 의해 산소 농도가 급격히 증가하는 것이 관찰되었으며, 이산화탄소 농도는 급격히 감소되는 것이 측정되었다. 따라서 미분무수에 의한 연소반응 속도의 급격한 감소에 의해 산소농도가 증가하였음을 확인하였다. 미분무수의 증발에 의해 상대습도는 분사순간부터 급격히 상승하였다.

• 한국분무공학회지
• /
• 제7권3호
• /
• pp.38-44
• /
• 2002

The purpose of this study is to investigate the effect of the volume fraction of water and injection pressure on the spray characteristics of water/oil emulsified fuel injected from the pressure swirl atomizer. The mixture of light oil and water by using impeller mixer was performed. The spray characteristics such as SMD and velocity were measured using PDPA. The injection pressures were 7.5, 100, 200 and $300kgt/cm^2$ and volume fractions of water in emulsified fuel were 0, 10, 20 and 30%, respectively. The measurement sections were at 30, 60 and 90mm from injection nozzle tip. SMD and velocity of emulsified fuel were larger gradually by increasing the volume fraction of water in emulsified fuel. The spray angle was decreased and axial velocity was increased with increase in water content. It was found that the relative SMD ratio was increased more greatly than the relative axial velocity ratio in super critical pressure. The relative SMD ratio was increased and the relative axial velocity ratio was decreased with increase injection pressure at spray downstream.

• Applied Microscopy
• /
• 제45권4호
• /
• pp.249-253
• /
• 2015

Microorganisms specifically groups of bacteria exhibiting physiological activities of production of acids are a major cause of concern because of their ability to induce corrosion in oil field pipelines and metal systems involved in water handling. Water Injection Stations as a means of secondary recovery from existing oil producing reservoirs, are often employed in most upstream oil and gas industries to ensure replenishment of voidage, maintenance of reservoir pressure and optimization of crude emulsion throughput. In the present study, scanning electron microscopy of macroscopic orange coloured slime formations sampled from leaking valves on the flow-lines of a Water Injection Stations of Oil India Limited revealed the presence of filamentous bacterial mats in association with diatoms. The species composition of the acidic slime formations from the sampled locations reveal the possible role of acid producing iron oxidizing bacteria (IOB) like Acidithiobacillus ferrooxidans in association with Gomphonema sp. in creating conditions for bio-corrosion.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.226-229
• /
• 2008

When methane hydrate is artificially formed to store and transport large quantity of natural gas, its reaction time may be too long and the gas consumption in water becomes relatively low, the reaction rate between water and methane gas is low. Therefore, the present investigation focuses on the rapid production of hydrates and increases the gas consumption by injecting water into methane gas utilizing nozzle. the hydrate in water injection using a nozzle formed rapidly more than that in gas injection, and the gas consumption of methane hydrate in water injection is about three to four times greater than that in gas injection according to subcooling.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.739-740
• /
• 2010

1단용 액체로켓엔진 후류 때문에 발생하는 유도로의 열적 부하를 감소시키기 위한 방법 중 물분사 방식의 효과적인 냉각 성능을 고찰하기 위해 두 가지 방법과 다양한 물분사 조건에 대해 수치적 계산을 수행하였다. 중앙분사 방식이 측면분사 방식보다 보다 효과적으로 후류를 냉각시켜 유도로의 열적부하를 감소시킴을 알 수 있었다.