• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.15
• /
• pp.99-113
• /
• 1974

This experiment was carried out to find reasonable semi. hot seedbed system for early transplanting of "Tongil"rice cultivar. The quality of the young rice-plants, yield, and the occurrence of the reddish dry leaves were not significant differences between the seedbed with polyethylene tunnel and that of Rat covering. The per cent of healthy seedling of the soil preparation with the dry soil plowing was increased than that of the water soil plowing. The stability of the seedling cultivation of the thin layer straw mulching seedbed beneath the polyethylene film was higher than that of the common flat seedbed system.ed system.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.29-41
• /
• 1993

In order to surface Hydrophobilization of Poly(ethylene terephthalate) (PET) fiber samples were treated in the atmosphere of CF$_{4}$ or $C_{2}$F$_{6}$glow discharge. The sample used in this study was PET film which is 75$\mu$m thick made by Teijin, O-Type(Japan). The cleaned samples were placed in plasma reactor made of pyrex glass cylinder, and plasma processing was carried out by glow discharge of CF$_{4}$ or $C_{2}$F$_{6}$ gas, being continuously fed by gas flow and continuously pumped out by a vacuum system. Electric power source for generate plasma state was sustained alternating current(60Hz) and voltage was sustained 600 volt. The duration of plasma treatment varied from 15 to 120 seconds except special case, the monomer gase pressure varied from 0.02 to 0.3 Torr and power range was 10 to 90 watts. The hydrophobic features of changed PET surface were evaluated by contact angle measurement and surface chemical characteristics were analyzed by ESCA. Results can be summerized as follows. 1. The most favorable setting position of substrate was the center area between the two electrodes. 2. $C_{2}$F$_{6}$ discharge current was lower than that of CF$_{4}$ when same voltage was sustained. Treated efficiency between CF$_{4}$ and $C_{2}$F$_{6}$ did not revealed significant differences under same electric power(wattage). 3. When monomer pressure is very low below 0.02 torr, as though substrate is exposed to CF$_{4}$ or $C_{2}$F$_{6}$ plasma, it tend to be hydrophilic through a little of fluorine bond and a great deal of oxidizing reaction. 4. There brought good hydrophobilization when monomer pressure was more 0.1 torr and duration of glow discharge treatment was over 45 seconds. When monomer pressure was too high, discharge current became low. Although prolong the duration, there was no more high hydrophobilization. 5. According to ESCA analysis, there were a little CF bond and a prevailing CF$_{2}$ bond in CF$_{4}$-treated substrate. There were CF$_{3}$, a little CF and a prevailing CF$_{2}$ bond in $C_{2}$F$_{6}$-treated substrate.d substrate.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.185-190
• /
• 2008

In order to increase the surface area of electrodes for electrosorption, porous carbon electrodes were fabricated by a wet phase inversion method. A carbon slurry consisting of a mixture of activated carbon powder (ACP), polyvinylidene fluoride (PVdF), and N-methyl-2-pyrrolidone (NMP) as a solvent was cast directly on a graphite sheet. The cast film was then immersed in pure water for phase inversion. The physical and electrochemical properties of the electrodes were investigated using scanning electron microscopy (SEM), porosimetry, and cyclic voltammetry. The SEM images verified that the pores of various sizes were formed uniformly on the electrode surface. The average pore sizes determined for the electrodes fabricated with various NMP contents ranged from 64.2 to 82.4 nm and the size increased as the NMP content increased. All of the voltammograms showed a typical behavior of charging and discharging characteristic at the electric double layer. The electrical capacitance ranged from 3.88 to $5.87F/cm^2$ depending on the NMP contents, and the electrical capacitance increased as the solvent content decreased. The experimental results showed that the solvent content is an important variable controlling pore size and ultimately the capacitance of the electrode.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.183-190
• /
• 2009

The aim of this study is to find the condition of forming the favorable nanotubes by anodizing with NaF and $H_3PO_4$. Machined Ti discs were used for anode, and Platinum net was used for cathode. For electrolyte, $H_3PO_4$ and NaF solution were mixed. We controlled voltage, electrolyte concentration, anodizing time and formed nanotubes on Ti discs. After that, these were washed with distilled water for 24 hours and dried in the $40^{\circ}C$ oven for 24 hours. The surface structure of specimens were analyzed. The results were as follows : At 0.5 wt % NaF, according as increasing voltage and anodizing time, early state of nucleating pores were generated. At 1.0 wt % NaF, 20 V, 20 & 25 min, well-formed nanotubes were observed. At 1.0 wt % NaF, 30 V, structure of nanotube became bigger and interconnected. At 2.0 wt % NaF, no nanotubes were formed and it was unrelated with voltage and time. At 1.0 wt % NaF, 20 V, 20 - 25 min, well-ordered nanotubes were generated on Ti discs. For the formation of favorable nanotubes, it is considered that proper parameters such as electrolyte concentration, voltage, anodizing time are necessary according to the kind of electrolytes.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.1
• /
• pp.110-115
• /
• 1999

Pulmonary histiocytosis X is a granulomatous disorder of the lung of unknown cause. Patients with this disease often complain of cough, dyspnea on exertion and, occasionally, chest pain from pneumothorax or bone involvement. However, DI is uncommon in these patients. We report a case of primary pulmonary histiocytosis X with central diabetes insipidus. A 23-year-old man presented with dyspnea suffered from dry cough, exertional dyspnea, polydipsia and polyuria for 4 months. He was a heavy smoker. He was found to have reticulonodular interstitial opacities on chest X-ray film. High-resolution computed tomography revealed thin-walled cysts of various sizes in both lungs. Open lung biopsy was done. On light microscopic examination revealed proliferation and infiltration of Langerhans cells. Immunohistochemically, Langerhans cells showed strong cytoplasmic staining with S-100 protein and electronmicroscopic examination showed Birbeck granules in Langerhans cells. Water deprivation test showed central-type diabetes insipidus and brain MRI showed no abnormal lesion on suprasellar region. Smoking cessation was recommended. He was treated with oral desmopressin.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.472-477
• /
• 2011

To study the effects of the acid group of functionalized MWNT (multiwalled carbon nanotube) on the thermal and mechanical properties of polyacrylonitrile(PAN) nanofibers, acid ($H_2SO_4/HNO_3$) treated MWNT (O-MWNT) were further functionalized by diazonium salt reaction with 5-aminoisophthalic acid (IPA). Compared to O-MWNT, IPA-MWNT with isophthalic acid group showed a better dispersion stability in polar solvents and IPA-MWNT/PAN composite film displayed lower heat of reaction (${\Delta}H$) than that of homo PAN when stabilized under air atmosphere. The continuous electrospun fibers were prepared using a conductive water bath. PAN fibers containing 1 wt% of IPA-MWNT showed an increase of tensile strength by 100% and tensile modulus by 240% compared to the PAN fibers without IPA-MWNT.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.4
• /
• pp.367-372
• /
• 2000

A series of experiment was conducted to investigate the relationship between ammoia removal rate and ammonia loading rates in seawater filtering system using rotating biological contactor (RBC). In this experiment, RBC system was consisted of rotating polyvinyl film disks, which provided $12 m^2$ of total effective surface area in $0.075 m^3$ of volume. $NH_4Cl$ was added by $10{\~}150 g$ as a ammonia nitrogen source to determine ammonia removal rate in RBC system. Relationship between time required for ammonia removal (y: hour) and nitrogen inputted ($x: NH_4-N mg/l$) in RBC system was as followed: $y=3.51+7.76 lnx (r^2=0.936)$. At ammonia concentration $2 mg/l$, it took 10 hour for removal of ammonia in the RBC system. However, at ammonia concentration of $5 and 16.5 mg/l$, it took 16 and 27 hours, respectively. There was a decreasing tencency of an increasing ammonia in the rearing water. Finally, the ammonia removal rate in the RBC system increased with the rise of total ammonia concentration up to $16.5 mg/l$.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2000.04a
• /
• pp.12-13
• /
• 2000

최근 플라스틱제 식품 포장재에 대한 환경학적 문제가 제기됨으로 인하여 다양한 곡류 단백질의 필름 형성능력에 많은 관심이 모아지고 있다. 단백질 필름으로서 soy protein, wheat gluten, rice bran, corn zein, glatin 및 colloagen 등의 소재들이 많은 관심을 모으고 있으며, 비교적 필름 형성력이 뛰어나고, 저렴한 가격으로 구입할 수 있는 대두 단백질에 커다란 관심이 모아지고 있는 실정이다. 이들 물질로부터 제조된 가식성 필름 및 코팅제들은 식품의 보존기간을 연장시킬 뿐만 아니라 수분 및 용질의 이동을 방지하여 식품의 품질을 개선시킬 수 있다. 또한 이들 필름 및 코팅제들은 산소 및 이산화탄소의 이동, 이로 인한 지방 산화 그리고 휘발성 향기성분들의 감소 등을 조절할 수 있다. 대두 단백질 필름의 사과 코팅제로서의 이용은 개별적 포장이 용이하지 않는 제품들의 코팅제로서 활용하여 대두 단백질 필름 및 코팅제의 잠재적 시장성을 확인하는 하나의 응용분야이다. 본 실험의 목적은 대두 단백질 코팅제를 후지와 golden delicious 사과에 코팅하여 상온 (22$^{\circ}C$)과 냉장온도(2-4$^{\circ}C$)에서 60일동안 보관하여 색도, 경도 및 산도 변화 등을 측정하여 저장 중 사과의 품질에 미치는 영향을 조사하였다. 대두 단백질 코팅제는 대두 단백 용액들 (5g, 8g, 10g/100mL water)에 glycerin (50% w/w의 단백질)을 가소재로 첨가한 후 알칼리 용액으로 pH 9.0에 맞추었다. 그런후 85$^{\circ}C$에서 30분간 가열하여 코팅제를 준비하였다. 후지 사과(붉은색)와 golden delicious 사과 (초록색)를 dipping 방법으로 코팅하여 60일도안 실온과 냉장온도에 저자하여 보존기간의 연장을 확인하였다. 사과품질의 결정인자는 Hunter L, a, b 색도값과 사과의 조직의 강도 (외부 및 내부) 그리고 산도 등을 측정하였다. 코팅된 후지 및 golden delicious 사과의 표피 및 내부 경도는 control과 비교하여 높은 경도를 유지하였다. 또한 냉장온도에서 30일 동안 보관하였을 때, control 사과와 거의 비슷한 경도를 유지하였다. 식품의 색도를 소비자의 기호를 결정하는 중요한 인자이다. 대두 단백질로 코팅된 후지 사과는 상온에서 20일 동안은 control에 비하여 약간의 색도의 증가를 보였으나, 그 후 60일 동안은 색도의 증가를 보이지 않았다. 그러나 냉장 보관한 control 후지 사과에 비하여 색도의 증가가 관찰되었다. 대두 단백질 코팅제가 사과의 색도 변화를 방지하는 효과를 가졌으나, 저장 온도가 색도의 변화에 더욱 큰 영향을 미침을 알 수 있었다. 대두 단백질로 코팅된 golden delicious는 상온에서60일 동안 보관하였을 경우, 사과표피의 색도 변화를 현저히 지연시킴을 확인하였다. 또한 control과 비교하여 성공적으로 사과에 코팅하였으며, 상온에서 보관하여을 때 사과의 품질을 30일 이상 연장하는 효과를 관찰하였다. 이들 결과로부터 대두단백질 필름이 과일 등의 포장제로서 이용할 가능성을 확인하였다.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.580-586
• /
• 2016

Cr-Si-Al-N coating with different Si content were deposited by hybrid physical vapor deposition (PVD) method consisting of unbalanced magnetron (UBM) sputtering and arc ion plating (AIP). The deposition temperature was $300^{\circ}C$, and the gas ratio of $Ar/N_2$ were 9:1. The CrSi alloy and aluminum targets used for arc ion plating and sputtering process, respectively. Si content of the CrSi alloy targets were varied with 1 at%, 5 at%, and 10 at%. The phase analysis, composition and microstructural analysis performed using x-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) including energy dispersive spectroscopy (EDS), respectively. All of the coatings grown with textured CrN phase (200) plane. The thickness of the Cr-Si-Al-N films were measured about $2{\mu}m$. The friction coefficient and removal rate of films were measured by a ball-on-disk test under 20N load. The friction coefficient of all samples were 0.6 ~ 0.8. Among all of the samples, the removal rate of CrSiAlN (10 at% Si) film shows the lowest values, $4.827{\times}10^{-12}mm^3/Nm$. As increasing of Si contents of the CrSiAlN coatings, the hardness and elastic modulus of CrSiAlN coatings were increased. The morphology and composition of wear track of the films was examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy, respectively. The surface energy of the films were obtained by measuring of contact angle of water drop. Among all of the samples, the CrSiAlN (10 at% Si) films shows the highest value of the surface energy, 41 N/m.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.42-48
• /
• 2002

The design, construction and performance test of a convenient multi-purpose irradiator is described. A multi-purpose irradiator using Cesium-137 has been developed for studies of low dose radiation effects in biology and for calibration of Thermo Luminescent dosimeter(TLD). During the operation, three rods of radioactive material which are 10cm in length revolve 180 degrees and irradiate biological samples, or TLD, and return to their shielded position, after the programmed time. A programmable Logic Controller(PLC) controls the sequence of operation, interlock, motor rotation and safety system. The rotation speed of biological samples can vary up to 20 RPM. A real time monitoring system was also incorporated to check and control the operation status of the irradiator. The capacity of the irradiation chamber was 4.5 liters. The isodose distribution at arbitrary vertical planes was measured by using film dosimetry. The dose-rate was 0.13 cGy/min in air and 0.11 cGy/min in water equivalent material in the case of Cesium-137. Range of activity was 2 Ci. The homogeneity of dose distribution in the chamber was ${\pm}$7%. The actual radiation level on the surface was within permissible levels. The irradiator had a maximum 0.35 mR/min radiation leakage on its surface.