• Analytical Science and Technology
• /
• v.24 no.1
• /
• pp.38-44
• /
• 2011

The quality of decoction water would be important for the preparation of herbal medicines. Four types of decoction water, S1, S2, S3 and S4, three types of mineral water from Jeju island and one type of tap water from Seoul region were evaluated. The contents of minerals in decoction water were analysed by ICP-AES and ICP-MS. There was significant difference in the mineral contents between the types of decoction water. The bioactive components from rhubarb were extracted with four types of water and the relationship between mineral contents in water and the extracted amounts of components was evaluated. The total extraction was calculated by evaporating water and weighing the residue. The bioactive components in rhubarb were determined by HPLC method. Kruskall-Wallis rank sum tests were used. Multiple factor analysis was used to analyze the relation between the contents of mineral and total extraction or bioactive components in the decocted solutions. Not only the total extraction but also the amount of extracted bioactive components showed statistically significant relationship with the contents of minerals and anions in decoction water.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.379-387
• /
• 2003

The freeze dried young antler was extracted by water and proteases. In case of water extraction, the extraction rate was highest when it was reacted in 5% of concentration for 6 hours at 50$^{\circ}C$. The result of HPLC analysis of extract shows that high molecular peak in water extract was transformed into low molecular polk by proteases. The rate of low molecular peak was highest when bacteria protease was used, and its second highest rate was pepsin, but the effect of papain on it was low, The extraction rate of young antler reacted for 5 hours was 33.4%(absorbance 13.25 at 280nm) of bacteria protease, 22.4%(absorbance 10.06) of papain, and 30.2% (absorbance 11.34) of pepsin. The young antler was boiled for 30min and it was reacted by proteases for 5 hours at 50$^{\circ}C$. The extraction rate of it was 47,6%(absorbance 12,54) of bacteria protease, and 26,4%(absorbance 7,48) of papain, and 45.6%(absorbance 7.23) of pepsin, In protein content, water extract was 52,1%, bacteria protease extract was 37.8%, and in amino acid content, water extract was 16.3%, bacteria protease extract was 31.96%, in ash content, water extract was 8.8%, bacteria protease extract was 5.6% by dry base. In mineral content, water extract contains 3.6% of Ca, 8.6% of P, 0.01% of Mg, 1.4 % of Na, 0.02 % of F, and bacteria protease extract contains 2.5% of Ca, 11.8% of P, 0.046 % of Mg, 2.1 % of Na, 0.018 % of F by dry base.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.551-561
• /
• 2007

This case study is about the sampling and interpretation of soil pore water in order to understand and to predict the diffusion and behavior of soil pollution. For the measurement of polycyclic aromatic hydrocarbons(PAHs) in two representative hydrocarbon-contaminated sites, the extraction system of the soil pore water was set up with respect to soil depths and the behavior of contaminants was interpreted. The soil solution extraction system consisted of peristaltic pump, and extraction and sampling compartment, and can measure simultaneously the soil water pressure. The concentration of PAHs with respect to extraction pressure and time decreased due to dilution through soil pore water. Particularly, the concentration of PAHs was more reduced under the unsaturated oxic condition than saturated anoxic condition. Therefore, the soil solution extraction with respect to soil water pressure can interpret the extent of equilibrium between porewater and soil surface.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.1195-1196
• /
• 2005

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.542-547
• /
• 2017

Ultrasound-assisted extraction (UAE) has attracted growing interest, as it is an effective method for the rapid extraction of bioactive compounds from plants with a high extraction efficiency comparable to the conventional extraction. In this study, UAE was used for the extraction of polyphenols from lipid extracted microalgae (Tetraselmis KCTC 12236BP) and the effects of five extraction variables on the total phenolic compounds (TPC) were studied. For the optimization of extraction parameters, particle size, solid-to-liquid (L/S) ratio, ethanol concentration, extraction temperature and extraction time have been examined as independent variables. All variables exhibited the significant effects on the extraction of TPC and extraction temperature showed the most significant effect among five variables. The optimal extraction conditions were the extraction using mixed particle, S/L ratio of 10%, ethanol concentration of 60%, extraction temperature of $100^{\circ}C$ and extraction time of 30 min, which gave the 8.7 mg GAE/g DW for TPC. Compared with conventional hot-water extraction, TPC extraction under UAE was increased by up to 1.8 fold with same extraction condition. This study showed that UAE under low temperature and short extraction time was proven to be an effective extraction process for TPC production from LEA compared to conventional hot-water extraction process.

• Analytical Science and Technology
• /
• v.19 no.6
• /
• pp.455-459
• /
• 2006

The extraction and separation of glabridin from licorice root by HPLC was performed in this work. First, by investigating the different extraction solvents, extraction methods and extraction times, a one-hour ultrasonic extraction procedure with ethyl acetate as the extraction solvent was optimized. Then the ethyl acetate extraction was applied to RP-HPLC for separation of glabridin. The column efficiencies and resolutions were experimentally investigated with different mobile phase compositions. Baseline separation of glabridin was obtained under the mobile phase composition of 50/50 vol.% (ACN/water). The retention time of glabridin was 20.3 min. The peak of glabridin was collected from the HPLC elution for several times and identified by LC/MS. Under the optimum extraction and HPLC separation methods, 1.26 g of glabridin per kg licorice root could be extracted.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.319-325
• /
• 2017

In this study, we optimized the coffee extraction conditions for instant coffee production in two stage percolators, which is the most common coffee extractor for instant coffee production. A central composite design was used to build mathematical model equations for response surface methodology (RSM). In these equations, the yield and overall acceptability of the coffee extracts were expressed as second-order functions of three factors, the feed water temperature, draw-off factor (DOF), and extraction time (cycle time). Based on the result of RSM, the optimum conditions were obtained with the use of desirability function approach (DFA) which find the best compromise area among multiple options. The optimum extraction conditions to maximize the yield and overall acceptability over 40% of yield were found with $163^{\circ}C$ of feed water temperature, 4.3 of DOF and 27 minutes of extraction time (cycle time). These results provide a basic data for the coffee extraction conditions for the competitive instant coffee in the industry.

• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.184-188
• /
• 2002

This study was conducted to optimize hot water extraction process of cordyceps militaris for development beverage. Optimal condition for hot water extraction was investigated with changes in extraction concentration and temperature by response surface methodology. The content of soluble solid was effected with concentration. The efficiency of extraction for turbidity, total sugar, reducing sugar and protein increased with low concentration. The response variables had significant with concentration and the established polynomial model was suitable (p>0.05) model by lack-of-fit analysis. Optimal extraction conditions as the limited renditions of 2.0∼2.4% extractable solids, 1.5∼2.0% brix, l14∼120 $\mu\textrm{g}$/g total sugar, 10.5∼11.0 $\mu\textrm{g}$/ｇ reducing sugar and 110∼l15 $\mu\textrm{g}$/g protein were 95∼100$\^{C}$ and 4.0∼4.1% of concentration.

• Journal of Ginseng Research
• /
• v.26 no.4
• /
• pp.202-205
• /
• 2002

This study was carried out to investigate the optimum conditions for extraction of acidic polysaccharide from red ginseng marc produced by manufacturing alcoholic and water extract from red ginseng. Extraction efficacy of acidic polysaccharide from dried red ginseng marc was higher than that before drying. The appropriate conditions for the extraction of acidic polysaccharide from red ginseng marc were particle size under 3.35 mm after drying red ginseng marc, 1∼2 hours of extraction time and 2∼3 extraction times, respectively. The amount of acidic polysaccharide in water extract from red ginseng marc treated with $\alpha$-amylase and cellulase increased about 20∼50%. From the above resuts, we suggest that red ginseng marc produced by manufacturing alcoholic and water extract of red ginseng has higher potencies in the utilization of waste materials.

• Analytical Science and Technology
• /
• v.9 no.2
• /
• pp.210-219
• /
• 1996

Extraction of minerals in deionized water and elimination effect of heavy metals in water by Nohwado Quartz Porphyry were examined. When the Nohwado Quartz Porphyry was immersed and stirred in deionized water at 0.5, 1.0, 1.5 and 2.0% concentration for 3 hours, various minerals concentration of the all stirred water were suitable for potable water. Particularly, when the lead, copper, cadmium and arsenic solution were shaked with Quartz Porphyry at $20^{\circ}C$ for 24 hours, the elimination rate of each mineral was 99.5, 99.9, 95.0 and 66.5%, respectively.