• Journal of Ginseng Research
• /
• v.24 no.1
• /
• pp.23-28
• /
• 2000

To develop a dry alcohol containing red ginseng extract, dry alcohols composed of ethanol, water, dextrin and sodium lauryl sulfate were prepared using spray dryer, and their ethanol contents and encapsulation efficiencies were determined. An optimal dry alcohol containing red ginseng extract was chosen and the feeling for its oral administration was evaluated. Dextrin at dextrin/water weight ratios below 1.6/l and ethanol at ethanol/water weight ratios below 1/1 remarkably Increased both the ethanol contents and encapsulation efficiencies of dry alcohols. However dextrin at dextrin/water weight ratios above 1.6/1 and ethanol at ethanol/water weight ratios above 1/1 slightly decreased the both parameters. It might be due to the low solubility of dextrin in ethanol and limited diffusion coefficient of ethanol to the dextrin shell. furthermore, 0.5% (w/w) sodium lauryl sulfate gave the maximum ethanol content of dry alcohol. The more increased amounts of red ginseng extract were added, the more increased amounts of ginsenoside Rb1 but the more decreased amounts of ethanol were encapsulated in dry alcohols. A dry alcohol containing red ginseng extract was prepared with dextrin/ethanol/water (1/1/1, w/w/w) mixed solution, in which 0.5% (w/w) sodium lauryl sulfate and 20% (w/w) red ginseng extract were dissolved. It contained the ethanol contents of31.17$\pm$ 1.33% (w/w) and ginsenoside Rbl of 243.0$\pm$7.0 $\mu$g/g. It gave the moderate taste of red ginseng extract at Its oral administration with or without water Thus, the dry alcohol containing red ginseng extract can be further developed as a more convenient dosage form for red ginseng extract.

• Food Engineering Progress
• /
• v.23 no.1
• /
• pp.7-15
• /
• 2019

The impregnation of solid foods into the surrounding hypotonic or hypertonic solution was explored as a method to infuse NaCl in pork loin cube without altering its matrix. Mass transfer kinetics using a diffusive model as the mathematical model for moisture gain/loss and salt gain and the resulting textural properties were studied for the surrounding solutions of NaCl 2.5, 5.0, 10.0 and 15% (w/w). It was possible to access the effects of brine concentration on the direction of the resulting water flow, quantify water and salt transfer, and confirm tenderization effect by salt infusion. For brine concentrations up to 10% it was verified that meat samples gained water, while for processes with 15% concentration, pork loin cubes lost water. The effective diffusion coefficients of salt ranged from 2.43×10^-9 to 3.53×10^-9 m²/s, while for the values of water ranged from 1.22×10^-9 to 1.88×10^-9 m²/s. The diffusive model was able to represent well salt gain rates using a single parameter, i.e. an effective diffusion coefficient of salt through the meat. However, it was not possible to find a characteristic effective diffusion coefficient for water transfer. Within the range of experimental conditions studied, salt-impregnated samples by 5% (w/w) brine were shown with minimum hardness, chewiness and shear force.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.160-166
• /
• 2007

Novel multiblock copolymers, based on segmented sulfonated hydrophilic-hydrophobic blocks, were synthesized and investigated for their application as proton exchange membranes. A series of segmented sulfonated poly(arylene ether sulfone)-b-polyimide multiblock copolymers, with various block lengths, were synthesized via the coupling reaction between the terminal amine moieties on the hydrophilic blocks and naphthalene anhydride functionalized hydrophobic blocks. Successful imidization reactions required a mixed solvent system, comprised of NMP and m-cresol, in the presence of catalysts. Proton conductivity measurements revealed that the proton conductivity improved with increasing hydrophilic and hydrophobic block lengths. The morphological structure of the multiblock copolymers was investigated using tapping mode atomic force microscopy (TM-AFM). The AFM images of the copolymers demonstrated well-defined nanophase separated morphologies, with the changes in the block length having a pronounced effect on the phase separated morphologies of the system. The self diffusion coefficient of water, as measured by $^1H$ NMR, provided a better understanding of the transport process. Thus, the block copolymers showed higher values than Nafion, and comparable proton conductivities in liquid water, as well as under partially hydrated conditions at $80^{\circ}C$. The new materials are strong candidates for use in PEM systems.

• Journal of Integrative Natural Science
• /
• v.6 no.4
• /
• pp.193-196
• /
• 2013

Haemoglobin is an interesting physiologically significant protein composed of specific functional prosthetic haem and globin moieties. In recent decades, there has been substantial interest in attempting to understand the structural basis and functional diversity of avian haemoglobins (Hbs). Towards this end, purification, crystallization, preliminary X-ray diffraction and molecular-replacement studies have been carried out on Amaurornis phoenicurus Hb. Crystals were grown by the hanging drop vapor-diffusion method using PEG 2000 and NaCl as precipitants. The crystals belonged to the primitive monoclinic system $P2_1$, with unit-cell parameters $a=65.33{\AA}$, $b=93.14{\AA}$, $c=98.54{\AA}$, ${\beta}=100.48^{\circ}$; a complete data set was collected to a resolution of $2.6{\AA}$. The Matthews coefficient of $2.30{\AA}^3Da^{-1}$ for the crystal indicated the presence of two ${\alpha}_2{\beta}_2$ tetramers in the asymmetric unit.

• 한국해양학회지
• /
• v.28 no.2
• /
• pp.101-106
• /
• 1993

A simple three-dimensional cubic model is applied to the formation of the Yellow Sea Cold Water Mass in Summer. We studied how the tidal mixing and the Kuroshio Water Mass affect the formation of the Yellow Sea cold Water. The tidal mixing effect is parameterized into the vertical diffusion coefficient because of the technical difficulties in the numerical model In this study, the thermal front along the coast could be formed only by the tidal mixing effect. However, the southern front of the Yellow Sea Cold Water Mass has to consider the warm Kuroshio water. the resultant shows the opposite temperature distribution in upper layer and lower layer. the center of the model is warmer in the upper layer and colder in the lower layer than the coast. The resultant circulation pattern is also reverse, clockwise circulation in the upper layer and counter-clockwise circulation in the lower layer.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.33-39
• /
• 1983

Tidal exchange of sea water was studied by using drogue experiments and tidal current measurement data in Yeoja Bay which has a narrow channel. At the spring tide, the volume of tidal transport in the bay was estimated to be 43% of the mean volume of the sea water in Yeoja Bay, 1.96km super(3). Residual current was deduced to flow southward at the rate of 3,658$\times$10 super(4) m super(3) per tidal cycle. The mean tidal exchange of sea water during the flood flow was estimated to be approximately 5.0% of the volume of sea water at the mean high water level in the bay, 2.33km super(3), while that during the ebb flow was 6.3%. One dimensional diffusion coefficient of 1.69-1.97$\times$10 super(6) cm super(2)/sec was obtained at the channel in the bay.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.1-9
• /
• 2004

This paper represents the permeability of chloride ions and the corrosion performance in the concrete blended with granulate blast furnace slag exposed to chloride environment. An ordinary cement (type I ) and sulfate resisting cement(type V) were used for the experiment. The two cements were combined with $0\%$, $25 \%$, $40\%$, and $55\%$ of the granulated blast furnace slag. The accelerated permeability tests of chloride ions were performed in accordance with ASTM C1202, and the accelerated corrosion tests of steel were carried out by using the method of immersion/drying cycles. After water curing 28 days, 56 days and 91 days, these tests were conducted until 30 cycles. In every cycle, test specimens were wetted in $3\%$ NaCl solution for three days and dried again in $60^{\circ}C$ air for four days. As an experimental results, the diffusion coefficient of chloride ions of the ordinary cement Concrete Combined granulated blast furnace slag was much lower than that of non granulated blast furnace slag concrete. Moreover, the diffusion coefficient of chloride ions of sulfate resisting cement concrete was higher than that of ordinary cement concrete. On the basis of the results of accelerated corrosion tests, corrosion resistance of the concrete mixed with granulated blast furnace slag shows good to corrosion resistance, however, the concrete with sulfate resisting cement shows bad to corrosion resistance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.53-60
• /
• 2017

Fly ash(FA) which is a byproduct in the coal combustion in thermal power plant contributes to pore structure densification due to pozzolanic reaction, and this leads to long-term strength development and excellent resistance to chloride penetration. In the work, compressive strength and chloride resistance in OPC(Ordinary Portland Cement) and FA-based concrete are evaluated, and the relationships are investigated considering ages. For the work, 3 different W/B (Water to Binder) ratios of 37%, 42%, and 47% are prepared, and 3 substitution ratio of fly ash(0%, 30%, and 50%) are considered as well. At the age of 28 days and 180 days, test results of compressive strength, diffusion coefficients based on Tang's method, and passed charges referred to ASTM C 1202 and KS F 2711 are obtained. With increasing replacement ratio of FA and decreasing W/B, the resistances to chlorides(diffusion coefficient and passed charge) are improved, and the results at the age of 180 days decrease to only 15% level at the age of 28 days due to pozzolanic reaction in FA 50 mixture, which shows that resistance to chloride is much dependent on age effect than strength development. After 180 days, more clear linear relationships are observed between strength and resistance to chloride.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.52-59
• /
• 2018

To control chloride attacks which is a representative deterioration in RC(Reinforced Concrete) structures, many studies have been conducted. Above all, a method using mineral admixture was known to be effective for corrosion protection. In this study, durability test about chloride attacks was carried out for concrete specimens containing FA(Fly Ash)-representative concrete mineral admixture and OPC concrete specimens considering 3 different levels of W/B(Water to Binder). Accelerated chloride diffusion coefficient tests referred to Tang's method, total passed charge tests referred to ASTM C 1202, and compressive strength tests based on KS F 2405 were performed at each target age day. Also, based on previous studies of 28 days, time-parameter which is a key parameter for diffusion behavior is evaluated and its relations with compressive strength at the age of 365 days is evaluated. After the age of 49 days, chloride resistance of FA concrete is much improved than that of OPC concrete, which arose out of stable hydrates due to pozzolan reaction of fly ash. Time-parameter of FA concrete is evaluated to be about 1.5 times larger than that of OPC concrete. Also, time-parameter of FA concrete has a linearly decreasing relation while that of OPC concrete has a linearly increasing relation with compressive strength development.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.11
• /
• pp.4629-4635
• /
• 2014

Background: Diffusion-weighted imaging (DWI) makes it possible to detect malignant tumors based on the diffusion of water molecules. However, it is uncertain whether DWI has advantages over FDG-PET for distinguishing malignant from benign pulmonary nodules and masses. Materials and Methods: One hundred-forty-three lung cancers, 17 metastatic lung tumors, and 29 benign pulmonary nodules and masses were assessed in this study. DWI and FDG-PET were performed. Results: The apparent diffusion coefficient (ADC) value ($1.27{\pm}0.35{\times}10^{-3}mm^2/sec$) of malignant pulmonary nodules and masses was significantly lower than that ($1.66{\pm}0.58{\times}10^{-3}mm^2/sec$) of benign pulmonary nodules and masses. The maximum standardized uptake value (SUVmax: $7.47{\pm}6.10$) of malignant pulmonary nodules and masses were also significantly higher than that ($3.89{\pm}4.04$) of benign nodules and masses. By using optimal cutoff values for ADC ($1.44{\times}10^{-3}mm^2/sec$) and for SUVmax (3.43), which were determined with receiver operating characteristics curves (ROC curves), the sensitivity (80.0%) of DWI was significantly higher than that (70.0%) of FDG-PET. The specificity (65.5%) of DWI was equal to that (65.5%) of FDG-PET. The accuracy (77.8%) of DWI was not significantly higher than that (69.3%) of FDG-PET for pulmonary nodules and masses. As the percentage of bronchioloalveolar carcinoma (BAC) component in adenocarcinoma increased, the sensitivity of FDG-PET decreased. DWI could not help in the diagnosis of mucinous adenocarcinomas as malignant, and FDG-PET could help in the correct diagnosis of 5 out of 6 mucinous adenocarcinomas as malignant. Conclusions: DWI has higher potential than PET in assessing pulmonary nodules and masses. Both diagnostic approaches have their specific strengths and weaknesses which are determined by the underlying pathology of pulmonary nodules and masses.