• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3B
• /
• pp.205-209
• /
• 2011

The low carrying capacity caused by the deposition in a sewer line is one of the main reason of the urban flood. Therefore, an efficient maintenance and management of the storm water drainage system is very important to prevent urban flood. In this research, the sediment transport characteristics through a pressure pipeline were examined with laboratory experiments. Bed-forms in a pipeline, sediment rates, roughness due to sediments were examined. Experimental system consists of flow circulation system with a pump and a sediment feeder at the upstream of the pipeline. Sediments were supplied into a 60 mm-diameter and 8 m-long pipe. Maximum flow rate is $30m^3/hr$, and the sediment feeding rate range is 5 g/s~19 g/s. Governing parameters and estimation equation for sediment transport rate were developed. The mean velocity (U), coefficient of viscosity (${\mu}$), unit width bed load ($q_b$), mean diameter of particle ($d_{50}$), unit weight of sediment in water (${\gamma}^{\prime}_s$) were adopted as the most influencing factors of sediment transport patterns. The prediction equation for sediment transport rate were developed with two dimensionless terms. These two dimensionless terms showed a linear relationship with high correlation coefficient.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5B
• /
• pp.439-447
• /
• 2011

It is a main concern for sustainable development in water resources management to evaluate adaptation capability of water resources structures under the future climate conditions. This study introduced the Fuzzy Inference System (FIS) to represent the change of release and storage of reservoirs in the Han River basin corresponding to various inflows. Defining the adaptation capability of reservoirs as the change of maximum and/or minimum of storage corresponding to the change of inflow, the study showed that Gangdong Dam has the worst adaptation capability on the variation of inflow, while Soyanggang Dam has the best capability. This study also constructed an Adaptive Neuro-Fuzzy Inference System (ANFIS) for the more accurate and efficient simulation of the adaptation capability of the Soyanggang Dam. Nine Inflow scenarios were generated using historical data from frequency analysis and synthetic data from two general circulation models with different climate change scenarios. The ANFIS showed significantly different consequences of the release and reservoir storage upon inflow scenarios of Soyanggang Dam, whilst it provides stable reservoir operations despite the variability of rainfall pattern.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.4
• /
• pp.153-168
• /
• 2017

The main objective of this study was to assess reference evapotranspiration based on multiple GCMs (General Circulation Models) and estimation methods. In this study, 10 GCMs based on the RCP (Representative Concentration Pathway) 4.5 scenario were used to estimate reference evapotranspiration. 54 ASOS (Automated Synoptic Observing System) data were constructed by statistical downscaling techniques. The meteorological variables of precipitation, maximum temperature and minimum temperature, relative humidity, wind speed, and solar radiation were produced using GCMs. For the past and future periods, we estimated reference evapotranspiration by GCMs and analyzed the statistical characteristics and analyzed its uncertainty. Five methods (BC: Blaney-Criddle, HS: Hargreaves-Samani, MK: Makkink, MS: Matt-Shuttleworth, and PM: Penman-Monteith) were selected to analyze the uncertainty by reference evapotranspiration estimation methods. We compared the uncertainty of reference evapotranspiration method by the variable expansion and analyzed which variables greatly influence reference evapotranspiration estimation. The posterior probabilities of five methods were estimated as BC: 0.1792, HS: 0.1775, MK: 0.2361, MS: 0.2054, and PM: 0.2018. The posterior probability indicated how well reference evapotranspiration estimated with 10 GCMs for five methods reflected the estimated reference evapotranspiration using the observed data. Through this study, we analyzed the overall characteristics of reference evapotranspiration according to GCMs and reference evapotranspiration estimation methods The results of this study might be used as a basic data for preparing the standard method of reference evapotranspiration to derive the water management method under climate change.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.5 no.4
• /
• pp.51-56
• /
• 2022

Purpose: By applying an ultrasonic mechanical device to the liquid fertilizer storage in the pig dropping treatment plant, the initial odor of the odor source is reduced, and the air dilution drainage of the complex odor is fundamentally recognized to facilitate odor treatment on the mechanical and chemical biological treatment devices at the rear. Research design, data and methodology: The odor concentration on the site boundary was measured to confirm the state of reduction. In order to prevent the spread of odor from the collection of the pig dropping treatment plant, it was measured by installing an ultrasonic generator inside the installation wall after installing the sealing wall. Results: The average value of the March and April measurement data remained close to neutral at 8.2 after 8.6 treatment before pH treatment, decreased 97.3% from 462 mg/L before SS treatment to 10.5 mg/L after treatment, and the composite odor was reduced by 85% from 20 to 3 before treatment. It was confirmed that ammonia (NH3) was reduced by 99% from 5.8 ppm to 0.09 ppm, and general bacteria were also reduced by 99% from 3,200 CFU/mL to 57 CFU/mL Conclusion: Applying the ultrasonic air ejector hybrid system and zigzag air complex module development product to resource circulation centers or sewage treatment facilities is thought to reduce inconvenience to residents due to odors caused.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.1
• /
• pp.82-92
• /
• 2013

This paper presents a landscape design proposal for the Kyeongsang National University Hospital in Changwon, Kyeongsangnam-do. The site is located at 555 Samjeongja-dong, Seongsan-gu, Changwon, Kyeongsangnam-do, and its area is approximately $79,743.1m^2$. The goal of the design was to create a landscape that helps the patients' recovery and public well-being as well as respects the surrounding environment. In order to achieve this goal, three design subjects were considered: maximizing the healing functions of the landscape, promoting ecologically regenerative landscape, and increasing the aesthetic value of the landscape based on the local context. For the healing aspect, first, therapeutic plants were carefully selected and various healing programs were introduced to the open space area such as the sensory garden, meditative space, the medicinal herb garden, outdoor acupressure treatment facilities, remedial playground etc. In addition, as the importance of patient's privacy is emphasized in research, the space and circulation patterns were divided according to the characteristics of the users. For ecological consideration, the design proposed to preserve and extend the existing ridgeline with pine forest, and recover the natural water system and recycle the water for the landscape management. For the aesthetic experience of the people, in contrast to the surrounding evergreen forest, diverse deciduous and flowering plants were introduced to arouse a sense of the season, and fruit bearing trees for wildlife to create a specific mood of being in nature so that people can listen to the songs of the birds and watch squirrels play etc. In addition, all the spaces and facilities were designed and placed according to universal design principles so that there would be no barrier for the patients to use them. Also, a sustainable management scheme was suggested to maintain the landscape in ecological and economical ways.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.6
• /
• pp.131-142
• /
• 2020

The objective of this study was to evaluate future inundation risk of farmland according to the application of coupled model intercomparison project phase 5 (CMIP5) and coupled model intercomparison project phase 6 (CMIP6). In this study, future weather data based on CMIP5 and CMIP6 general circulation model (GCM) were collected, and inundation was simulated using the river modeling system for small agricultural watershed (RMS) and GATE2018 in the Tanjung district of the Moohan stream watershed. Although the average probable rainfall of CMIP5 and CMIP6 did not show significant differences as a result of calculating the probability rainfall, the difference between the minimum and maximum values was significantly larger in CMIP6. The results of the flood discharge calculation and the inundation risk assessment showed similar to trends to those of probability rainfall calculations. The risk of inundation in the future period was found to increase in all sub-watersheds, and the risk of inundation has been analyzed to increase significantly, especially if CMIP6 data are used. Therefore, it is necessary to consider climate change effects by utilizing CMIP6-based future weather data when designing and reinforcing water structures in agricultural areas in the future. The results of this study are expected to be used as basic data for utilizing CMIP6-based future weather data.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.312-320
• /
• 2020

Various LIDs with natural water circulation function are applied to reduce urban environmental problems and environmental impact of development projects. However, excessive Infiltration and evaporation of LID facilities dry the LID internal soil, thus reducing plant and microbial activity and reducing environmental re duction ability. The purpose of this study was to develop a real-time measurement system with complex sensors to derive the management plan of LID facilities. The test of measurable sensors and Internet of Things (IoT) application was conducted in artificial wetlands shaped in acrylic boxes. The applied sensors were intended to be built at a low cost considering the distributed LID and were based on Arduino and Raspberry Pi, which are relatively inexpensive and commercialized. In addition, the goal was to develop complex sensor measurements to analyze the current state o f LID facilities and the effects of maintenance and abnormal weather conditions. Sensors are required to measure wind direction, wind speed, rainfall, carbon dioxide, Micro-dust, temperature and humidity, acidity, and location information in real time. Data collection devices, storage server programs, and operation programs for PC and mobile devices were developed to collect, transmit and check the results of measured data from applied sensors. The measurements obtained through each sensor are passed through the Wifi module to the management server and stored on the database server in real time. Analysis of the four-month measurement result values conducted in this study confirmed the stability and applicability of ICT technology application to LID facilities. Real-time measured values are found to be able to utilize big data to evaluate the functions of LID facilities and derive maintenance measures.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.35-56
• /
• 1995

During the last two decades, Korea has achieved remarkable economic growth. In this process the nation has become urbanized and industrialized. But we have also encountered widening regional disparity, housing shortage of larger cities, transportation congestion, environmental pollution and many other problems. Rapid increasing urbanization and continuous migration toward Seoul since the late 1960s have been one of the major concerns of government. Government has sought ways to moderate the population increase in Seoul. The regulation which include new town development near Seoul and dispersion strategies of higher education and other administration and living facilities outside of Seoul havemade a great expansion of the spatial influence of Seoul city. Seoul metropolitan reaion has evolved as the most powerful center of political and economical spaces. Generally within a metropolitan region, there exists a growing mutual interdependence economically, as well as socially between a central city and its surrounding area. Seoul metropolitan region manifests itself not only as a coherent system of urbanized regions, but also as an integral part of the daily urban system. The surrounding Gyunggi province and Seoul city become closely linked both economically and functionally, constituting true functlonai urban system. This study is primarily undertaken with the purpose of delineation of the sphere of influence of Seoul city in 1990. At the time of 1985, Seoul metropolitan region was delineated according to the result of the study which was performed by Korea Research Institute for Human Settlements. Afterward, the rapid speed of metropolitanization process with dramatic increase in mobility through the provision of wider transportation system across the Capital region have evolved, resulting in the great expansion of the spatial influence of Seoul city. So this study examines the expanded area of Seoul metropolitan regin during the period of 1985-90. In order to delineate Seoul metropolitan region, the indices of urbanization and functional linkage are selected. Variables included in the measurement of the urbanization level are agricultural structure, population characteristics, manufacturing and service industries, and cultural aspects such as newspaper circulation, the ratio of car ownership and piped water supply. Variables included in the measurement of functional linkage are commuting, shopping pattern, centralized service such as medical facilities and trade of agricultural products. The standardization method and factor analysis are employed in making the delineation of Seoul metropolitan region. According to the result of this study, 2 cities, 8 Eups and 46 Myuns are included Seoul metropolitan region in 1990. If we compare this delineated area in 1990 to that of 1985, we can find the distinctive pattern of expanded axes according to the main transportation routes such as Seoul-Suweon, Seoul-Gwangju, Seoul-Incheon. In 199O, all the Gyunggi province, except a few Myuns located at the north and northwest part of Gyunggi province, are included in Seoul metropolitan region. Furthermore, this study attempts to the analysis of regional structure of Seoul metropolitan region according to the functional characteristics of each city and Gun. Variables included in this analysis are the new residential function, manufacturing function, service function, education and infermation function, public facility function and agricultural function. Factor analysis and cluster analysis are employed in making regionalization. Seoul metropolitan reaion is subdivided into four subregions which reflect different functional specialization. The first group is the specialized region of newly formed residential function. The second group is the specialized reaion of manufacturing function. The third group is the specialized region of service function. And the fourth group has little specialized in terms of manufacturing, service, and residential function. But this region has some potentiality of development when Seoul metropolitan region grow continuously. Seoul metropolitan region accounted for 43% of national population, despite 11.8% of national land size in 1990. Although Seoul metropolitan region enjoys important agglomeration economies, it also has huge social cost in the form of transportation congestion, housing shortage, rapid increase of land value, environment pollution, and etc. Efficient metropolitan plan making is a vital element in promoting Seoul's economic development and providing high quality living environment at low cost. In the light of the result of this study, the outer ring of Seoul metropolitan region, especially northeastern part, are underdeveloped compared to overdeveloped southwestern area. It is needed to develop the guidelines for the implement of the growth control and management plan, inducing more balanced development for whole Seoul metropolitan reaion.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.86-103
• /
• 2016

'Sukchunjeahdo' illustration-book, which was left by Han, Pil-gyo(韓弼敎 : 1807~1878)in the late Joseon Dynasty, includes pictorial record paintings containing government offices, Eupchi, and Feng Shui condition drawn by Gyehwa(界畵) method Sabangjeondomyobeop(四方顚倒描法) and is the rare historical material that help to understand spatial structure and landscape characteristics. Youngyuhyun(永柔縣) and Sincheongun(信川郡) town, the case sites of this study, show Feng Shui foundation structure and placement rules of government offices in the Joseon Period are applied such as 3Dan 1Myo(三壇一廟 : Sajikdan, Yeodan, Seonghwangdan, Hyanggyo), 3Mun 3Jo(三門三朝 : Oeah, Dongheon, Naeah) and Jeonjohuchim(前朝後寢) etc. by setting the upper and lower hierarchy of the north south central axis. The circulation system is the pattern that roads are segmented around the marketplace of the entrance of the town and the structure is that heading to the north along the internal way leads to the government office and going out to the main street leads to the major city. Baesanimsu(背山臨水 : Mountain in backward and water in front) foundation, back hill pine forest, intentionally created low mountains and town forest etc. showed landscape aesthetics well suited for the environmental comfort condition such as microclimate control, natural disaster prevention, psychological stability reflecting color constancy principle etc. and tower pavilions were built throughout the scenic spot, reflecting life philosophy and thoughts of contemporaries such as physical and mental discipline, satisfied at the reality of poverty, returning to nature etc. For government office landscape, shielding and buffer planting, landscape planting etc. were considered around Gaeksa(客舍), Dongheon(東軒), Naeah(內衙) backyard and deciduous tree s and flowering trees were cultivated as main species and in case of Gaeksa, tiled pavilions and pavilions topped with poke weed in tetragonal pond were introduced to Dongheon and Naeah and separate pavilions were built for the purpose of physical and mental discipline and military training such as archery. Back hill pine tree forest formed back landscape and zelkova, pear trees, willow trees, old pine trees, lotus, flowering trees etc. were cultivated as gardening trees and Feng-Shui forest with willow trees as its main species was created for landscape and practical purposes. On the other hand, various cultural landscape elements etc. were introduced such as pavilions, pond serving as fire protection water(square and circle), stone pagoda and stone Buddha, fountains and wells, monument houses, flagpoles etc. In case of Sincheongun town forest(邑藪), Manhagwan(挽河觀), Moonmujeong(文武井), Sangjangdae(上場岱) and Hajangdae(下場岱) Market place, Josanshup<(造山藪 : Dongseojanglim(東西長林)>, Namcheon(南川) etc. were combined and community cultural park with the nature of modern urban park was operated. In this context, government office landscape shows the garden management aspect where square pond and pavilions, flowering trees are harmonized around side pavilion and backyard. Also, environmental design technique not biased to aesthetics and ideological moral philosophy and comprehensively considering functionality (shielding and fire prevention, microclimate control, etc.) and environmental soundness etc. is working.