• KSBB Journal
• /
• v.22 no.4
• /
• pp.197-200
• /
• 2007

This study examined the conditions of filtration and concentration of methanol extract from biomass. Filtration efficiency was improved by adding diatomaceous earth as a filter aid. The optimal amount of diatomaceous earth was 6% (w/w) to reduce the filtration time. The filtration time was reduced by 4.2% in first extraction, 30.0% in second extraction, 22.8% in third extraction, and 19.0% in fourth extraction, respectively. The optimal temperature of water bath was below 50$^{\circ}C$ for preventing paclitaxel degradation during concentration of methanol extract using a rotary evaporator. The temperature of concentrated solution in rotary evaporator was relatively low compared to bath temperature because of latent heat of evaporation. The stopping point of concentration in rotary evaporator for the following step was at a specific gravity of 0.96 of the concentrated solution in terms of the purity and yield of paclitaxel. This information is very useful for mass extraction of biomass for the recovery of paclitaxel from plant cell culture.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.497-505
• /
• 2005

Domestic Sewage Treatment Plants are mostly based on biological treatment, in which large amounts of excess sludge are generated and occupy about 40 ~ 60% of the total sewage treatment costs. Several methods for sludge treatment has been so far reported as upgrading biodegradation of sludge; heat treatment, chemical treatment, including thermo-alkali and ozone, mechanical treatment including ultrasonic pulverization. But, it has a limitation in case of reducing the amount of excess sludge which are already producted. In this study, application of excess sludge reduction process using thermophilic aerobic bacteria for activated sludge was examined. The research was carried out two different stage. one for a biological wastewater treatment and the other for a thermophilic aerobic solubilization of the waste sludge. A portion of excess sludge from the wastewater treatment step was into the thermophilic aerobic sludge solubilization reactor, in which the injected sludge was solubilized by thermophilic aerobic bacteria. The solubilized sludge was returned to the aeration tank in the wastewater treatment step for its further degradation. Sludge solubilization reactor was operated at $63{\pm}2^{\circ}C$ with hydraulic retention time(HRT) of 1.5 ~ 1.7 day. Control group was operated with activated sludge process(AS) and experiment group was operated with three conditions(RUN 1, RUN 2, RUN3). RUN 1 was operated with AS without sludge solubilization reactor. RUN 2 were operated with AS with sludge solubilization reactor to examine correlation between sludge circulation ratio and sludge reduction ratio by setting up sludge circulation ratio to 3. RUN 3 was operated with sludge circulation ratio of 3 and MLSS concentration of 1,700~2,000mg/L to examine optimum operation condition. The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge solubilization ratio and sludge reduction ratio were 53. 7%, 95.2% respectively. After steady state operation, average concentration of TBOD, SBOD, $TCOD_{Cr}$, $SCOD_{Cr}$, TSS, VSS, T-N, T-P of effluent were 4.5, 1.7, 27 .8, 13.8, 8.1, 6.2, 15.1, 1.8mg/L in the control group and were 5.6, 2.0, 28.6, 19.1, 9.7, 7.2, 16.1, 2.0mg/L in the experimental group respectively. They were appropriate to effluent standard of Sewage Treatment Plants.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.211-215
• /
• 2005

Three curcuminoids [curcumin (CUR), demethoxycurcumin(DEM), bisdemethoxycurcu in (BIS)] are major yellow pigments in turmleric (Curcuma longa L.) root. Contents of curcuminoids in turmeric roots collected from 6 locations were analyzed using, high performance liquid chromatography (HPLC) equipped with reversed-phase column, an UV-Vis detector at 420nm, and eluted with a mixture of acetonitrile: $0.1\%$ acetic acid in water (50 : 50, v/v) as mobile phase. The stability of curcuminoid pigments in $80\%$ methanol extract solution were investigated during storage in a freezer at $-20^{\circ}C$, room temperature in the dark, and light condition. Calibration curves for the determination of curcuminoids were made with significant linearity $(r^2=0.999**)$. Average content of total curcuminoids was 171.5 mg/g, with 91.6 mg/g of CUR, 56.9 mg/g of DEM, and 23.0 mg/g of BIS. Amount of curcuminoids during storage in a freezer was almost not changed while those in room temperature wert reduced and rapid degradation appeared after 60 days. Within 90 days, about $50\%$ curcuminoid decreased in the dark and about $70\%$ in the light condition, indicating the decomposition of curcuminoid pigments followed under light and heat.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.1
• /
• pp.26-46
• /
• 2020

An irrigated-maize agroecosystem is viewed as an open thermodynamic system upon which solar radiation impresses a large gradient that moves the system away from equilibrium. Following the imperative of the second law of thermodynamics, such agroecosystem resists and reduces the externally applied gradient by using all means of this nature-human coupled system acting together as a nonequilibrium dissipative process. The ultimate purpose of our study is to test this hypothesis by examining the energetics of agroecosystem growth and development. As a first step toward this test, we employed the eddy covariance flux data from 2003 to 2014 at the AmeriFlux NE1 irrigated-maize site at Mead, Nebraska, USA, and analyzed the energetics of this agroecosystem by scrutinizing its radiation, energy and entropy exchange. Our results showed: (1) more energy capture during growing season than non-growing season, and increasing energy capture through growing season until senescence; (2) more energy flow activity within and through the system, providing greater potential for degradation; (3) higher efficiency in terms of carbon uptake and water use through growing season until senescence; and (4) the resulting energy degradation occurred at the expense of increasing net entropy accumulation within the system as well as net entropy transfer out to the surrounding environment. Under the drought conditions in 2012, the increased entropy production within the system was accompanied by the enhanced entropy transfer out of the system, resulting in insignificant net entropy change. Drought mitigation with more frequent irrigation shifted the main route of entropy transfer from sensible to latent heat fluxes, yielding the production and carbon uptake exceeding the 12-year mean values at the cost of less efficient use of water and light.

• Journal of Food Hygiene and Safety
• /
• v.18 no.2
• /
• pp.87-93
• /
• 2003

This study was performed to investigate aflatoxin reduction resulting from the pre-treatment and the cooking and processing of corn. Aflatoxin was produced by Aspergillus parasiticus ATCC 15517 on a type of corn imported from the United States. The aflatoxin-produced com (AC) was pre-treated in three ways in order to reduce aflatoxin: exposure to sun light for 7 days (SC); ultraviolet irradiation for 56 hours (UC); and washing with water three times (WC). Four kinds of cooking and processing methods (boiling, steaming, baking, and popping) were used to reduce aflatoxin in the AC control, SC, UC, and WC. These treatments produced com gruel, com cakes, com bread and popcorn. The aflatoxin content in the samples was determined by high performance liquid chromatography. The total aflatoxin level of the AC was significantly decreased by sun light and UV (p<0.05), and decreased by washing. After cooking and processing the AC, SC, UC, and WC, and averaging the total aflatoxin levels in the final products, the greatest reduction was found in the com gruel, then the popcorn, then the corn cakes, and the least reduction in the com bread. These results indicate that sunlight and ultraviolet energy could be effective factors in aflatokin degradation in corn before cooking and processing. This study also indicates that boiling, steaming, baking and popping were helpful in reducing the aflatoxin level in the com and that the most helpful factors were exposure time to heat. More research is needed to reduce the aflatoxin level down to below the maximum tolerable level of aflatoxin in foods.

• Clean Technology
• /
• v.30 no.2
• /
• pp.134-144
• /
• 2024

In this study, the mechanical stability of red mud was improved for its commercial use as a catalyst to effectively decompose HFC-134a, one of the seven major greenhouse gases. Red mud is an industrial waste discharged from aluminum production, but it can be used for the decomposition of HFC-134a. Red mud can be manufactured into a catalyst via the crushing-preparative-compression molding-firing process, and it is possible to improve the catalyst performance and secure mechanical stability through calcination. In order to determine the optimal heat treatment conditions, pellet-shaped compressed red mud samples were calcined at 300, 600, 800 ℃ using a muffle furnace for 5 hours. The mechanical stability was confirmed by the weight loss rate before and after ultra-sonication after the catalyst was immersed in distilled water. The catalyst calcined at 800 ℃ (RM 800) was found to have the best mechanical stability as well as the most catalytic activity. The catalyst performance and durability tests that were performed for 100 hours using the RM 800 catalyst showed thatmore than 99% of 1 mol% HFC-134a was degraded at 650 ℃, and no degradation in catalytic activity was observed. XRD analysis showed tri-calcium aluminate and gehlenite crystalline phases, which enhance mechanical strength and catalytic activity due to the interaction of Ca, Si, and Al after heat treatment at 800 ℃. SEM/EDS analysis of the durability tested catalysts showed no losses in active substances or shape changes due to HFC-134a abasement. Through this research, it is expected that red mud can be commercialized as a catalyst for waste refrigerant treatment due to its high economic feasibility, high decomposition efficiency and mechanical stability.