• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.499-505
• /
• 2001

The objective of the paper was to measure the pressure drop and to investigate the recirculation region of the conical orifices used in Kwang-yang Iron & Steel Company. The flow field with water used as a working fluid was the turbulent flow for Reynolds number of $2{\times}10^4$. The effective parameters for the pressure drop and the recirculation region were the conical orifice's inclined angle (${\theta}$) against the wall, the interval(L) between orifices, the relative angle of rotation(${\alpha}$) of the orifices, the shape of the orifice's hole(circle, rectangle, triangle) having the same area. It was found that the shape of the orifice's hole affected the pressure drop and the flow field a lot, But the other parameters did not make much differences to the pressure drop. The PISO algorithm with FLUENT code was employed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.127-130
• /
• 2003

Electrolytic polishing is the anodic dissolution process in the transpassive state. It removes non-metallic inclusions and improves mechanical and corrosion resistance of stainless steel. Electrolytic polishing is normally used to remove a very thin layer of material from the surface of a metal object. An electrolyte of phosphoric, sulfuric and distilled water has been used in this study. In the low current density region, there can be found plateau region and material removal process and leveling process occur successively. In this study, an electrochemical polishing process using pulse current is adopted as a new electrochemical polishing process. In electrochemical machining processes, it has been found that pulse electrochemical processes provide an attractive alternative to the electrochemical processes using continuous current. Hence, this study will discuss the electrochemical polishing processes in low current density region and pulse electrochemical polishing.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2005

In aqueous alumina tape casting, the effects of altering the composition of the suspensions, the binders and the casting thickness were studied. The rheological behavior of the suspensions and the defects of the dried tapes were examined and the relationships between them are discussed. The changes in the defect regions reported in the previous paper were related with the rheological properties with variations of the binder, the composition and the casting thickness. The shear thinning factor increased with the organic content and the solid content (the decrease of water content). The apparent viscosity increased with the shear thinning factor. The relation between the shear thinning factor and the log apparent viscosity was similar for all binder types. In the relation between the defect free region and the rheological properties, the defect free region became narrower with increasing casting thickness. The defect free region is independent of binder type. Therefore, the thicker tape is more difficult to produce in aqueous alumina tape casting. Knowledge of the rheological properties of the suspensions could help Predict the defect type and the possibility of defect free dried tapes.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.109-114
• /
• 1992

The purpose of this study is to experimentally research the effects of polymer additives on turbulent transition of Couette flow between concentric cylinders when outer one is rotating and inner one is at rest; the diameter ratio being 0.2. Aqueous polymer solution generate the degradation phenomena in machine forming work, but this is not effected in about 10 minute at 5ppm. aqueous polymer solution testing. The Reynolds number, referred to the gap distance and rotation velocity of the outer cylinder, of turbulent transition is about 20000 for water flow. In the laminer region, the torque value is as same as theoretical one in the region of low Reynolds number, but becomes high with an increase in the Reynolds number. The polymer additives reduce the Reynolds number for turbulent transtition. In the turbulent region, the torque is remarkably reduced by the polymer additives, soluble polymer take down effect of turbulent transition boundary torque.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.6
• /
• pp.17-23
• /
• 2009

The Soil and Water Assessment Tool (SWAT) model was used in this study to evaluate the hydrologic impacts by the impervious surface change in the farm region. The model was calibrated and validated by using four years (1999-2002) of measured data for the Gyeongancheon watershed in Korea. The simulation results agreed well with observed values during the calibration and validation periods. Land use scenarios including various changes of the plastic film house area in the farm region were applied to assess their effects on watershed hydrology. The results indicated that the surface direct (5.6%~14.0%) and total runoff (0.8%~1.5%) increased, but the groundwater discharge (10.7%~27.7%) and evapotranspiration (1.5%~3.3%) decreased as the plastic film house area (5.7%~12.4%) increased.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.91-94
• /
• 2003

In this study we propose the improvement countermeasure of disaster prevention by analyzing the damage cause and issue point from examination by Typhoon "maemi" in Kyongsangnamdo region. The main damage cause by Typhoon "maemi" in this region is the rising of water level in river and the overflowing of bank. The basic countermeasure is executing the disaster policy enforcement for the improvement of agriculture infrastructure facilities.

• Journal of the Korean Society of Visualization
• /
• v.10 no.3
• /
• pp.37-41
• /
• 2012

Plate-fin heat exchanger is a kind of compact heat exchangers with a good performance in heat transfer. It is widely used in various engineering fields such as aerospace, chemical and biomedical industries. Quantitative and qualitative flow visualization study were performed using the water model of commercial plate-fin heat exchanger with header angles of $30^{\circ}$. The Reynolds number was 100. Conventional digital particle image velocimetry was used to measure the instantaneous velocity fields of the header region and the flow visualization using dye injection and hydrogen bubble method were applied to capture the qualitative flow characteristics. The results showed the existence of separation flow region at the junction area and the bottom wall of the exit region.

• ALGAE
• /
• v.23 no.3
• /
• pp.177-186
• /
• 2008

The present paper consists of 42 taxa belonging to 7 genera of desmids (green algae) collected from two districts of Garhwal region of Uttarakhand (Western Himalayas). The district Haridwar is located 29° 55’to 29° 59’N latitude and 68° 5’to 68° 30’E longitude covering about 2360 km2 area and Dehradun district is situated between 77° 34’to 78° 18’E longitude and 29° 58’to 30° 58’N latitude. Seven genera of desmids are (with number of taxa in parenthesis): Closterium Nitzsch. (9), Cosmarium Corda ex Ralfs (25), Euastrum Ehr. (2), Spondylosium Breb. (1), Micrasterias Ag. (1), Staurastrum Meyen (3), Arthrodesmus Ehr. (1). All these taxa constitute new records for the area. The algal localities are relatively cleaner than those of majority of urban areas. A rich assemblage of desmids shows that water bodies of these hilly areas are still undisturbed and need protection for preservation of algal biodiversity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.4
• /
• pp.295-297
• /
• 2006

Potassium (K) distribution in rice (Oryza sativa L.) root was studied by confocal laser microscopy, using potassium sensitive fluorescent dye potassium-binding benzofuran isophthalate (PBFI). Significantly high intensity of K-specific fluorescence was detected at the root cap region followed by meristematic and basal regions. A negligible or fainted fluorescence was observed at the root hairs area. These results suggest that K is heavily distributed in the apical area of rice root, which may be required in higher concentration for division and extension of cells, as it is the rapidly growing region of the root, moreover, may also be involved in water uptake by creating osmotic gradient across membranes.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.388-393
• /
• 2003

Electrolytic polishing is the anodic dissolution process in the transpassive state. It removes non-metallic inclusions and improves mechanical and corrosion resistance of stainless steel. Electrolytic polishing is normally used to remove a very thin layer of material from the surface of a metal object. An electrolyte of phosphoric acid 50% in vol., sulfuric acid 20% in vol. and distilled water 30% in vol. has been used in this study. In the low current density region, there can be found plateau region and material removal process and leveling process occur successively. In this study, an electrochemical polishing process using pulse current is adopted as a new electrochemical polishing process. In electrochemical machining processes, it has been found that pulse electrochemical processes provide an attractive alternative to the electrochemical processes using continuous current. Hence, this study will discuss the electrochemical polishing processes in low current density region and pulse electrochemical polishing.